COMMAND_CLASS_POWERLEVEL

Powerlevel

0x73

1

COMMAND_CLASS_SWITCH_BINARY

Switch Binary

0x25

1

COMMAND_CLASS_BASIC

Basic

0x20

1

COMMAND_CLASS_CONFIGURATION

Configuration

0x70

1

COMMAND_CLASS_INDICATOR

Indicator

0x87

1

COMMAND_CLASS_SECURITY

Security S0

0x98

1

COMMAND_CLASS_VERSION_V2

Version V2

0x86

2

COMMAND_CLASS_DEVICE_RESET_LOCALLY

Device Reset Locally

0x5A

1

COMMAND_CLASS_ZWAVEPLUS_INFO_V2

Z-Wave Plus Info V2

0x5E

2

COMMAND_CLASS_ASSOCIATION_V2

Association V2

0x85

2

COMMAND_CLASS_ASSOCIATION_GRP_INFO

Association Group Info

0x59

1

COMMAND_CLASS_NOTIFICATION_V8

Notification V8

0x71

8

COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2

Manufacturer Specific V2

0x72

2

COMMAND_CLASS_BASIC

Basic

0x20

1

Manual_Primary_Lang

Product or Owner's Manual

Supported Notification Types

1

5

0

Z-Wave Plus Lifeline. This group supporting command class lists as below: COMMAND_CLASS_SWITCH_BINARY, SWITCH_BINARY_REPORT COMMAND_CLASS_NOTIFICATION, NOTIFICATION_REPORT COMMAND_CLASS_DEVICE_RESET_LOCALLY, DEVICE_RESET_LOCALLY_NOTIFICATION

2

5

0

This group is controlling group, when the voltage of backup battery is low, diren will send a BASIC_SET = 0xFF to the nodes associated in group 2, This group supporting command class lists as below: COMMAND_CLASS_BASIC BASIC_SET

3

5

0

This group is for power managerment notification report. when the pwoer source is changed, siren will send a notification report to nodes associated in group 3. This group supporting command class lists as below: COMMAND_CLASS_NOTIFICATION NOTIFICATION_REPORT

4

5

0

This group is for Siren status report. When siren is actived or inactived, it will send a notification report to nodes associated in group This group supporting command class lists as below: COMMAND_CLASS_NOTIFICATION NOTIFICATION_REPORT

5

5

0

This group is forbinary switch status report. When siren is actived or inactived, it will send a binary switch report to nodes associated in group This group supporting command class lists as below: COMMAND_CLASS_SWITCH_BINARY SWITCH_BINARY_REPORT

1

Setting of alarm sound

This parameter is to set the sound sent by the alarm when giving an alarm and users can choose five different sound sources through this setting.

0

1

0

0

1

3

Alarm duration

This parameter can set the duration of the alarm function after activation. Unit of time is: seconds. Parameter description: 0- No alarm; 1 ~ 32766 – Alarm duration; 32767 – The alarm keeps sending alarm until the user shuts it down.

0

2

0

0

300

4

Light alarm mode

This parameter can set whether to open different light flashing modes when the alarm is activated. 1- Turn off the light when an alarm is sent; 2- The light flashes slowly when an alarm is sent; 3- The light flashes fast when an alarm is sent; 4- The light flashes in the breathing light mode when an alarm is sent.

0

1

0

0

4

5

Switch Binary Report Disable

If the gateway supports Notification Command Class Version 6 and versions above, the Switch Binary Report function can be disable so as to reduce the data volume communicating with the gateway and thus improve the communication quality of the network.0 - disable; 1 - enable.

0

1

0

0

0

6

Alarm Disable

This parameter can set the enabled and disabled of the alarm function. 0 – Disable the alarm function (i.e., the siren will not play sound or turn on led light when the alarm is triggered); 1 – Enable the alarm function.

0

1

0

0

1

1

Inclusion

a) Ensure that the siren is powered up correctly. b) Set Z-Wave Gateway entered inclusion mode. c) Press the button on the siren for three times quickly within 1.5 seconds. Then the LED light will flash for 5 times with an interval of 500ms, which means that the siren has entered the inclusion mode and it is waiting for the host to complete the configuration.

3

Learn Mode (adding another controller)

Keep pressing the button, and then power up the siren. The alarm will enter the factory test mode, in which all the operations in this manual will be invalid to the siren and LED will keep flashing. This operation will be valid only when no backup batteries are installed or the backup batteries have no power. Exit from factory testing mode: Power off, and then power the siren on by un-pressing the button. And then it will enter the normal working mode.

2

Exclusion

a) Ensure that the siren is powered up correctly. b) Set Z-Wave Gateway entered exclusion mode. c) Press the button on the siren for three times quickly within 1.5 seconds. Then the LED light will flash for 5 times with an interval of 500ms, which means that the alarm has entered the exclusion mode and it is waiting for the host to complete the configuration.

5

Factory Reset

a) Ensure that the siren is powered up correctly. b) Press the button and maintain this action for ten seconds, then release it after the LED light is on. Then the siren will erase all data and restore to the defaults. Note: This mode can also erase the network information of the siren and make the device exit from the Z-Wave. Please use this procedure only when the network primary controller is missing or otherwise inoperable. network that it has included.

Siren

(Refer to parameters): State idle

Siren

Siren status: Siren active

Siren

Unknown event/state