Wall Plug US – Z-Wave Alliance Product Catalog

Back to Listing

Product Recognition

Certification Number

ZC10-17115892

Name

Wall Plug US

Short Description

FIBARO Wall Plug is a Z-Wave controlled plug-in switch with the ability to measure power and energy consumption. It is also equipped with a USB charging port with power metering.

Long Description

FIBARO Wall Plug is a remotely controlled plug-in switch with the ability to measure power and energy consumption. It uses a LED frame to visualize the current load and operating mode with color changing illumination. FIBARO Wall Plug makes it possible to control electrical devices in a convenient and maintenance-free way. It is also equipped with a USB charging port with power metering. Main features of FIBARO Wall Plug: - Compatible with any Z-Wave or Z-Wave+ Controller. - Supports Z-Wave network Security Modes: S0 with AES-128 encryption and S2 with PRNG-based encryption. - Extremely easy installation - simply plug the device into the mains socket. - Equipped with USB charging port. - Works as a Z-Wave signal repeater. - Active power and energy consumption metering for plugged device and the USB port. - Current value of the load and operating mode are indicated by the multi-color LED frame.

Brand

FIBARO

Product Identifier

FGWPB-121

OEM Version

HW: 1 FW: 4.01:04.01

Hardware Platform

ZM5101

Z-Wave Version

6.71.01

Library Type

SLAVE_ENHANCED_232

Device Type

On/Off Power Switch

Role Type

ROLE_TYPE_SLAVE_ALWAYS_ON

Manufacturer ID

0x010F

Product Type ID

0x1401

Product ID

0x2000

User Icon

0x0700

Installer Icon

0x0700

Frequency Plans

US: 916.00MHz, 908.40MHz

Categories

Energy Meters, All Lighting Devices, On/Off Switches/Devices, Lighting Accessories

Countries / Regions

United States of America

Supported Command Classes

Controlled Command Classes

S2 Classes

S2_UNAUTHENTICATED, S2_AUTHENTICATED

Documents

Features

Association Groups

Configuration Parameters

Parameter Number

Name

Description

Format

Size

Min Value

Max Value

Default Value

Parameter Values

Overload safety switch

This function allows to turn off the controlled device in case of exceeding the defined power. Controlled device can be turned back on via button or sending a control frame. By default this function is inactive.

From	To	Description
0	0	function inactive
10	18000	1.0-1800.0W, step 0.1W) - power threshold

Controlling „On/Off (Power)” association group (3)

This parameter defines the way that 3rd association group devices are controlled. Depends on the actual measured power (according to parameters 21 and 22 settings).

From	To	Description
2	2	send frame (with value set in parameter 27) only if power dropped below value of parameter 22
1	1	send frame (with value set in parameter 26) only if power exceeded value of parameter 21
3	3	send frame in both cases

LED frame color when controlled device is on

When set to 1 or 2, LED frame color will change depending on active power and parameter 40. Other colors are set permanently and do not depend on power consumption.

From	To	Description
0	0	illumination turned off completely
1	1	color changes smoothly depending on active power
2	2	color changes in steps depending on active power
3	3	white
4	4	red
5	5	green
6	6	blue
7	7	yellow
8	8	cyan
9	9	magenta

LED frame color when controlled device is off

This parameter defines the illumination color after turning off.

From	To	Description
0	0	illumination turned off completely
1	1	LED frame is illuminated with a color corresponding to the last measured power, before the controlled device was turned off
3	3	white
4	4	red
5	5	green
6	6	blue
7	7	yellow
8	8	cyan
9	9	magenta

LED frame color at the Z-Wave network alarm detection

This parameter defines the illumination color in case of Z-Wave alarm.

From	To	Description
0	0	illumination turned off completely
1	1	no change in color. LED frame color is determined by settings of parameters 41 or 42
2	2	LED frame flashes red/blue/white
3	3	white
4	4	red
5	5	green
6	6	blue
7	7	yellow
8	8	cyan
9	9	magenta

Remember device status before the power failure

This parameter determines how the Wall Plug will react in the event of power supply failure (e.g. power outage or taking out from the electrical outlet). After the power supply is back on, the Wall Plug can be restored to previous state or remain switched off.

From	To	Description
1	1	device restores the state from before the power failure
0	0	device remains switched off

Response to alarm frames

This parameter defines how the Wall Plug will respond to alarms (device’s status change). In case of values 1 or 2 the Wall Plug is operating normally and LED frame signals an alarm through time defined in parameter 32 or until the alarm is canceled. In case of values 5 to 50 the Wall Plug does not report status change, power changes, ignores BASIC SET command frames. After time defined in parameter 32 or after the alarm cancellation, connected device is set to the previous state.

From	To	Description
0	0	no reaction
1	1	turn connected device on
2	2	turn connected device off
5	50	(0.5-5.0s, step 0.1s) - cyclically change device state with set period

SWITCH ON value - „On/Off (Button)” association group (2)

The value of BASIC SET command frame sent to the devices associated in 2nd group „On/Off (Button)” when turning the device ON using the button.

255

From	To	Description
0	0	turning off associated devices
1	99	forcing level of associated devices
255	255	setting associated devices to the last remembered state or turning them on

SWITCH OFF value - „On/Off (Button)” association group (2)

The value of BASIC SET command frame sent to the devices associated in 2nd group „On/Off (Button)” when turning the device OFF using the button.

From	To	Description
0	0	turning off associated devices
1	99	forcing level of associated devices
255	255	setting associated devices to the last remembered state or turning them on

Texts

Supported / Controlled Meter Types

Supported Notification Types

Supported Multilevel Sensors

Supports NWI

Yes

Supports Explorer Frames

Yes