Central Home Unit – Z-Wave Alliance Product Catalog

Back to Listing

Product Recognition

Certification Number

ZC10-18036034

Name

Central Home Unit

Short Description

The Central Home Unit is the main entity to observe and control any other Z-Wave certified device available on the market.

Long Description

The Central Home Unit is the main entity to observe and control any other Z-Wave certified device available on the market. The integrated User-Interface allows the user to fully monitor, configure and control devices. The user can get the actual values of any device actively or passively to not overload the network usage over the air. Additionally, the user can set values for devices which acts as actors in the network. The User-Interface also allows the user to create specific rules, e.g. to turn off a device if a consumption is reached or to shut down the curtains at a given point of time. Devices can be grouped together to act collectively on specific events, e.g. if a fire alarm was detected. The user can monitor the whole Z-Wave network and control it. In detail, the user can add, remove or replace devices to or from the network. He can configure connections and reset the whole network. Every node can be updated independently if needed. Every device can also be configured on its own. With this ability devices of the same type can act differently. To have a better monitoring overview each device can be associated with a human readable name and a location description. The User-Interface only allows to control and monitor the capabilities the device offers. The Central Home Unit can also be configured as slave device in a Z-Wave network to support any other Controller device.

Brand

baseCON

Product Identifier

CHU00001-w

OEM Version

HW: 1 FW: 4.37:02.61:01.00:01.00

Hardware Platform

OTHER

Z-Wave Version

6.51.08

Library Type

CONTROLLER_BRIDGE

Device Type

Gateway

Role Type

ROLE_TYPE_CONTROLLER_CENTRAL_STATIC

Manufacturer ID

0x0348

Product Type ID

0x0001

Product ID

0x0001

User Icon

0x0500

Installer Icon

0x0500

Frequency Plans

EU: 869.85MHz, 868.40MHz

Categories

All Controllers, Gateway Controller

Countries / Regions

European Union

Supported Command Classes

Controlled Command Classes

Identifier	Name	Key	Version
COMMAND_CLASS_SENSOR_ALARM	Sensor Alarm	0x9C	1
COMMAND_CLASS_SIMPLE_AV_CONTROL	Simple AV Control	0x94	1
COMMAND_CLASS_NO_OPERATION	No Operation	0x00	1
COMMAND_CLASS_NODE_NAMING	Node Naming	0x77	1
COMMAND_CLASS_POWERLEVEL	Powerlevel	0x73	1
COMMAND_CLASS_THERMOSTAT_FAN_MODE_V4	Thermostat Fan Mode V4	0x44	4
COMMAND_CLASS_USER_CODE	User Code	0x63	1
COMMAND_CLASS_ZIP_V3	Z/IP V3	0x23	3
COMMAND_CLASS_SWITCH_COLOR_V3	Switch Color V3	0x33	3
COMMAND_CLASS_ZIP_PORTAL	Z/IP Portal	0x61	1
COMMAND_CLASS_NETWORK_MANAGEMENT_INCLUSION_VERSION_2	Network Management Inclusion V2	0x34	0
COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3	Multi-Channel Association V3	0x8E	3
COMMAND_CLASS_CLOCK	Clock	0x81	1
COMMAND_CLASS_BATTERY	Battery	0x80	1
COMMAND_CLASS_SECURITY	Security S0	0x98	1
COMMAND_CLASS_APPLICATION_STATUS	Application Status	0x22	1
COMMAND_CLASS_THERMOSTAT_OPERATING_STATE	Thermostat Operating State	0x42	1
COMMAND_CLASS_SWITCH_BINARY	Switch Binary	0x25	1
COMMAND_CLASS_BASIC	Basic	0x20	1
COMMAND_CLASS_CONFIGURATION	Configuration	0x70	1
COMMAND_CLASS_CRC_16_ENCAP	CRC16 Encapsulation	0x56	1
COMMAND_CLASS_DOOR_LOCK_V2	Door Lock V2	0x62	2
COMMAND_CLASS_PROTECTION_V2	Protection V2	0x75	2
COMMAND_CLASS_SENSOR_BINARY_V2	Sensor Binary V2	0x30	2
COMMAND_CLASS_THERMOSTAT_FAN_STATE_V2	Thermostat Fan State V2	0x45	2
COMMAND_CLASS_THERMOSTAT_MODE_V2	Thermostat Mode V2	0x40	2
COMMAND_CLASS_THERMOSTAT_SETPOINT_V2	Thermostat Setpoint V2	0x43	2
COMMAND_CLASS_VERSION_V2	Version V2	0x86	2
COMMAND_CLASS_WAKE_UP_V2	Wake Up V2	0x84	2
COMMAND_CLASS_ZIP_ND	Z/IP-ND	0x58	1
COMMAND_CLASS_DEVICE_RESET_LOCALLY	Device Reset Locally	0x5A	1
COMMAND_CLASS_ZWAVEPLUS_INFO_V2	Z-Wave Plus Info V2	0x5E	2
COMMAND_CLASS_BARRIER_OPERATOR	Barrier Operator	0x66	1
COMMAND_CLASS_SWITCH_MULTILEVEL_V3	Switch Multilevel V3	0x26	3
COMMAND_CLASS_ASSOCIATION_V2	Association V2	0x85	2
COMMAND_CLASS_METER_V3	Meter V3	0x32	3
COMMAND_CLASS_SENSOR_MULTILEVEL_V9	Sensor Multilevel V9	0x31	9
COMMAND_CLASS_FIRMWARE_UPDATE_MD_V5	Firmware Update Meta-Data V5	0x7A	5
COMMAND_CLASS_MULTI_CHANNEL_V4	Multi-Channel V4	0x60	4
COMMAND_CLASS_ASSOCIATION_GRP_INFO_V3	Association Group Information V3	0x59	3
COMMAND_CLASS_NETWORK_MANAGEMENT_PROXY_V2	Network Management Proxy V2	0x52	2
COMMAND_CLASS_METER_TBL_MONITOR	Meter Table Monitor	0x3D	1
COMMAND_CLASS_NOTIFICATION_V8	Notification V8	0x71	8
COMMAND_CLASS_NETWORK_MANAGEMENT_BASIC_V2	Network Management Basic V2	0x4D	2
COMMAND_CLASS_CENTRAL_SCENE_V3	Central Scene V3	0x5B	3
COMMAND_CLASS_ZIP_GATEWAY	Z/IP Gateway	0x5F	1
COMMAND_CLASS_SECURITY_2	Security S2	0x9F	1
COMMAND_CLASS_SUPERVISION	Supervision	0x6C	1
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2	Manufacturer Specific V2	0x72	2
COMMAND_CLASS_MULTI_CMD	Multi-Command	0x8F	1

S2 Classes

S2_UNAUTHENTICATED, S2_AUTHENTICATED, S2_ACCESS_CONTROL

Documents

Features

Association Groups

Texts

ID	Description	Value
23	Controller Inclusion	Inclusion To include a device into the Z-Wave network open the Configuration User-Interface with the URL provided in the manual. Fill in your login credentials and confirm. This opens up the Management view of your Z-Wave network. In the Main Menu under the section ""More"" you can find the entry ""Add New Device"". This will start inclusion mode and you now also have to set the device into inclusion mode as described in the device's manual. If success the device will be listed in the device section
24	Controller Exclusion	Exclusion To exclude a device into the Z-Wave network open the Configuration User-Interface with the URL provided in the manual. Fill in your login credentials and confirm. This opens up the Management view of your Z-Wave network. In the Main Menu under the section ""More"" you can find the entry ""Remove Device"". This will start exclusion mode and you now also have to set the device into exclusion mode as described in the device's manual. Ff success the device will not appear in the device section.
3	Learn Mode (adding another controller)	Learn mode To put the device into lern mode open the Configuration User-Interface with the URL provided in the manual. Fill in your login credentials and confirm. This opens up the Management view of your Z-Wave network. In the Main Menu under the section ""More"" you can find the entry ""Initiate"". This will start initiate mode. You now have to set inclusion controller into inclusion mode as described in the controller's manual. Due to S2 security you will have to provide the key. After successful inclusion to the main controller you should see an updated list of devices in the device section
5	Factory Reset	Factory default Reset The Central Home Unit can reset the Z-Wave network and it's device list. To do so open the Configuration User-Interface with the URL provided in the manual. Fill in your login credentials and confirm. This opens up the Management view of your Z-Wave network. In the Main Menu under the section ""More"" you can find the entry ""Reset network"". This will start the reset network operation. If success the device section will only show the controller device. Please use this procedure only when the network is not working correctly. If this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network. If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller is missing or otherwise inoperable.

Supports NWI

Yes

Supports Explorer Frames

Yes