Product Recognition | |
|---|
Certification Number | ZC10-18056118 |
|---|
Name | 2 Button Hub/Panel Remote |
|---|
Short Description | Custom lighting control is at your fingertips with the Jasco Z-Wave 2-Button Portable Hub Remote. |
|---|
Long Description | Custom lighting control is at your fingertips with the Jasco Z-Wave 2-Button Portable Hub Remote. This versatile remote communicates with your hub to activate up to 6 unique, lighting scenes. Once the remote is connected to your existing network, you can begin programming the lights to personalize your indoor space. The wireless lighting control has an overall signal range of up to 150 feet and is compatible with any device that works with your hub.
Enjoy a variety of placement options for your lighting control – utilize the included hardware and magnetic bracket for wall mounting, detach the remote for instant portability or pair the remote with a separate stand for convenient tabletop use. The hub remote also functions on a scalable system, giving you the freedom to start with one remote and add as many as you need. Take control of your lights with the Z-Wave 2 Button Portable Hub Remote. |
|---|
Brand | Jasco |
|---|
Product Identifier | 37792 / ZW5307 |
|---|
OEM Version | HW: 255 FW: 5.18 |
|---|
Hardware Platform | ZM5202 |
|---|
Z-Wave Version | 6.71.01 |
|---|
Library Type | SLAVE_ENHANCED_232 |
|---|
Device Type | Wall Controller |
|---|
Role Type | ROLE_TYPE_SLAVE_SLEEPING_REPORTING |
|---|
Manufacturer ID | 0x0063 |
|---|
Product Type ID | 0x4843 |
|---|
Product ID | 0x3133 |
|---|
User Icon | 0x1600 |
|---|
Installer Icon | 0x1600 |
|---|
Frequency Plans | US: 916.00MHz, 908.40MHz |
|---|
Categories | All Controllers, Handheld Controller |
|---|
Countries / Regions | United States of America |
|---|
Supported Command Classes | Identifier | Name | Key | Version |
|---|
COMMAND_CLASS_FIRMWARE_UPDATE_MD_V4 | Firmware Update Meta-Data V4 | 0x7A | 4 | COMMAND_CLASS_POWERLEVEL | Powerlevel | 0x73 | 1 | COMMAND_CLASS_BATTERY | Battery | 0x80 | 1 | COMMAND_CLASS_SECURITY | Security S0 | 0x98 | 1 | COMMAND_CLASS_TRANSPORT_SERVICE_V2 | Transport Service V2 | 0x55 | 2 | COMMAND_CLASS_VERSION_V2 | Version V2 | 0x86 | 2 | COMMAND_CLASS_WAKE_UP_V2 | Wake Up V2 | 0x84 | 2 | COMMAND_CLASS_DEVICE_RESET_LOCALLY | Device Reset Locally | 0x5A | 1 | COMMAND_CLASS_ZWAVEPLUS_INFO_V2 | Z-Wave Plus Info V2 | 0x5E | 2 | COMMAND_CLASS_ASSOCIATION_V2 | Association V2 | 0x85 | 2 | COMMAND_CLASS_ASSOCIATION_GRP_INFO | Association Group Info | 0x59 | 1 | COMMAND_CLASS_CONFIGURATION_V3 | Configuration V3 | 0x70 | 3 | COMMAND_CLASS_SECURITY_2 | Security S2 | 0x9F | 1 | COMMAND_CLASS_CENTRAL_SCENE_V3 | Central Scene V3 | 0x5B | 3 | COMMAND_CLASS_SUPERVISION | Supervision | 0x6C | 1 | COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2 | Manufacturer Specific V2 | 0x72 | 2 |
|
|---|
S2 Classes | S2_UNAUTHENTICATED, S2_AUTHENTICATED |
|---|
Documents | Category | Description | File |
|---|
Manual_Primary_Lang | Product or Owner's Manual | |
|
|---|
Features | Feature | Values |
|---|
Color | | Battery Type | | Battery Quantity | | Firmware Updatable | Value |
|---|
Updatable by Consumer by RF |
|
|
|---|
Association Groups | Group Number | Maximum Nodes Supported | End Point ID | Description |
|---|
1 | 2 | 0 | Association Group 1 supports Lifeline, Battery Reports, Device
Reset Locally Notification |
|
|---|
Configuration Parameters | |
|---|
Texts | ID | Description | Value |
|---|
23 | Controller Inclusion | Adding your remote to a Z-Wave network
1. Follow the instructions for your Z-Wave certified hub to add a device to the Z-Wave network.
2. Once the hub is ready to add your device, press and hold Button 1 for 3 seconds.
3. The LED will flash two (2) times when the remote sends add notification (NIF).
NOTE: Some Hubs will require an additional step for secure inclusion, when prompted scan the QR code on the back of the remote, or type in the 5-digit pin code located on the back of the remote. | 24 | Controller Exclusion | Removing your remote from a Z-Wave network
1. Follow the instructions for your Z-Wave certified hub to remove a device from the Z-Wave network.
2. Once the hub is ready to remove your device, press and hold Button 1 for 3 seconds.
3. The LED will flash two (2) times when the remote sends remove notification (NIF). | 5 | Factory Reset | Returning your remote to factory defaults
1. Press and release Button 1 ten times quickly. All button presses must be within 6 seconds.
2. The LED will flash five (5) times when completed successfully.
NOTE: This should only be used in the event your network's primary controller/hub is missing or otherwise inoperable. | 4 | Device Wake-Up | 1. Press and hold Button 1 for 3 seconds.
2. The LED will flash two (2) times. |
|
|---|
Supports NWI | Yes |
|---|
Supports Explorer Frames | Yes |
|---|
