Product Recognition
Certification Number	ZC10-18096229
Name	Smartlock
Short Description	Delaney Hardware’s ZW300 Touchscreen Smartlock offers convenience and security for residential entry doors. Entry is made via touchscreen code, mobile app, or mechanical key.
Long Description	Delaney Hardware’s ZW300 Touchscreen Smartlock offers convenience and security for residential entry doors. Entry is made via touchscreen code, mobile app, or mechanical key. With Delaney’s smart home control app, a homeowner can manage who is entering their home from anywhere. • ANSI Grade 3 lock with motor-driven deadbolt • Keypad accommodates thirty user codes of four to eight digits, and a single-use code, with code-probing prevention and disablement after five attempts (warned with beeps and LED and then 45-seconds downtime) • Delaney app utilizes Z-Wave Plus via 128-bit AES encryption, mesh networking technology, and history log. It integrates with other Z-Wave devices such as doorbells with cameras, door and window sensors, outlet controls, heat and smoke sensors, thermostats, and water leak sensors via a security-enabled Z-Wave hub, which conveniently connects through your home WiFi, or plugs into your modem. • Configurable auto-locking (from 10-99 seconds) • Vacation mode with time-configurable deactivation during which all user codes are disabled such that only the mechanical key. • ANSI A156.25 compliance (water, dust, corrosion resistance) • Easy installation in standard doors with just a screwdriver (no hard wiring)
Brand	Delaney Hardware
Product Identifier	ZW300
OEM Version	HW: 1 FW: 1.02:01.00
Hardware Platform	ZM5101
Z-Wave Version	6.71.01
Library Type	SLAVE_ENHANCED_232
Device Type	Door Lock - Keypad
Role Type	ROLE_TYPE_SLAVE_SLEEPING_LISTENING
Manufacturer ID	0x040D
Product Type ID	0x0003
Product ID	0x0001
User Icon	0x0300
Installer Icon	0x0300
Frequency Plans	US: 916.00MHz, 908.40MHz
Categories	Locks
Countries / Regions	United States of America
Supported Command Classes	Identifier Name Key Version COMMAND_CLASS_POWERLEVEL Powerlevel 0x73 1 COMMAND_CLASS_USER_CODE User Code 0x63 1 COMMAND_CLASS_DOOR_LOCK_V2 Door Lock V2 0x62 2 COMMAND_CLASS_BATTERY Battery 0x80 1 COMMAND_CLASS_SECURITY Security S0 0x98 1 COMMAND_CLASS_TRANSPORT_SERVICE_V2 Transport Service V2 0x55 2 COMMAND_CLASS_VERSION_V2 Version V2 0x86 2 COMMAND_CLASS_DEVICE_RESET_LOCALLY Device Reset Locally 0x5A 1 COMMAND_CLASS_ZWAVEPLUS_INFO_V2 Z-Wave Plus Info V2 0x5E 2 COMMAND_CLASS_ASSOCIATION_V2 Association V2 0x85 2 COMMAND_CLASS_ASSOCIATION_GRP_INFO Association Group Info 0x59 1 COMMAND_CLASS_SECURITY_2 Security S2 0x9F 1 COMMAND_CLASS_SUPERVISION Supervision 0x6C 1 COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2 Manufacturer Specific V2 0x72 2
S2 Classes	S2_ACCESS_CONTROL
Documents	Category Description File Manual_Primary_Lang Product or Owner's Manual ZW300 Smartlock Manual_Sept2018 v2.pdf
Features	Feature Values Battery Quantity Value 4 Battery Type Value AA Color Value Chrome Door Lock Type Value Deadbolt Outdoor Use
Association Groups	Group Number Maximum Nodes Supported End Point ID Description 1 5 0 Z-Wave Plus Lifeline
Texts	ID Description Value 1 Inclusion Tap ""add device"" on your app, then tap enter to lock. Enter programming code -> confirm -> Enter 9 -> confirm If you hear 2 long beeps from your lock the programming was successful. If you hear short 3 beeps from your lock you must start over again. 2 Exclusion Tap ""remove device"" on your app, then tap enter to lock. Enter programming code -> confirm -> Enter 9 -> confirm If you hear 2 long beeps from your lock the programming was successful. If you hear short 3 beeps from your lock you must start over again. 5 Factory Reset Press the R button for more than 5 seconds; the programming is reset back to the original factory codes once you hear 3 long beeps. Please use this procedure only when the network primary controller is missing or otherwise inoperable. 4 Device Wake-Up Touch the touchscreen
Supports NWI	Yes
Supports Explorer Frames	Yes
Is Flirs	Yes