Product Recognition
Certification Number	ZC12-20060075
Name	Door / Window Sensor 7 Pro
Short Description	A 700 series sensor, which monitors if your window is open, closed or tilted. Can be connected to other sensors via a binary dry input.
Long Description	Aeotec Door/ Window Sensor 7 Pro is built on the 700 series Z-Wave technology. Its a small window position sensor for your smart home, it monitors window and their exact opening position and lets your know when a window is tilted or completely opened. It also supports connecting external binary sensors with a dry contact through the dry binary contact of the Door/ Window sensor. Using the latest technology it supports the highest Z-Wave security level of S2 and SmartStart.
Brand	Aeotec
Product Identifier	ZWA012-C
Product Line	Z-Wave Plus v2 Device
OEM Version	HW: 1 FW: 1.00
Hardware Platform	ZGM130
Z-Wave Version	7.12.2
Library Type	SLAVE_ENHANCED_232
Device Type	Notification Sensor
Role Type	ROLE_TYPE_SLAVE_SLEEPING_REPORTING
Manufacturer ID	0x0371
Product Type ID	0x0002
Product ID	0x000C
User Icon	0x0C06
Installer Icon	0x0C00
Frequency Plans	EU: 869.85MHz, 868.40MHz
Categories	Sensors
Countries / Regions	European Union
Supported Command Classes	Identifier Name Key Version COMMAND_CLASS_CONFIGURATION_V4 Configuration V4 0x70 4 COMMAND_CLASS_POWERLEVEL Powerlevel 0x73 1 COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3 Multi-Channel Association V3 0x8E 3 COMMAND_CLASS_INDICATOR_V3 Indicator V3 0x87 3 COMMAND_CLASS_BATTERY Battery 0x80 1 COMMAND_CLASS_SENSOR_BINARY_V2 Sensor Binary V2 0x30 2 COMMAND_CLASS_TRANSPORT_SERVICE_V2 Transport Service V2 0x55 2 COMMAND_CLASS_WAKE_UP_V2 Wake Up V2 0x84 2 COMMAND_CLASS_DEVICE_RESET_LOCALLY Device Reset Locally 0x5A 1 COMMAND_CLASS_ZWAVEPLUS_INFO_V2 Z-Wave Plus Info V2 0x5E 2 COMMAND_CLASS_ASSOCIATION_V2 Association V2 0x85 2 COMMAND_CLASS_FIRMWARE_UPDATE_MD_V5 Firmware Update Meta-Data V5 0x7A 5 COMMAND_CLASS_ASSOCIATION_GRP_INFO_V3 Association Group Information V3 0x59 3 COMMAND_CLASS_NOTIFICATION_V8 Notification V8 0x71 8 COMMAND_CLASS_SECURITY_2 Security S2 0x9F 1 COMMAND_CLASS_VERSION_V3 Version V3 0x86 3 COMMAND_CLASS_CENTRAL_SCENE_V3 Central Scene V3 0x5B 3 COMMAND_CLASS_SUPERVISION Supervision 0x6C 1 COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2 Manufacturer Specific V2 0x72 2
S2 Classes	S2_UNAUTHENTICATED, S2_AUTHENTICATED
Documents	Category Description File Manual_Primary_Lang Product Manual DWS7Pro_Manual_Extended-2-8.pdf
Features	Feature Values Color Value White Battery Quantity Value 1 Battery Type Value ER14250
Association Groups	Group Number Maximum Nodes Supported End Point ID Group Name Profile Description 1 5 0 Lifeline 0x0001 Lifeline to Gateway 2 5 0 Control 0x2001 Control devices when a magnet or external dry contacts trips 4 5 0 Tamper 0x7107 Sends alarm messages when tamper is tripped 5 5 0 Tilting 0x2002 Control devices when tilting sensor trips 3 5 0 Alarm sensor 0x7106 Sends out alarm message when a magnet or external dry sensor trips
Configuration Parameters	Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 4 Visual LED Indications This parameter defines when the red LED will indicate events. Disabling all indications may extend battery life. 4 1 0 7 7 From To Description 7 0 All LED indications on (values 1 + 2 + 4 summarized) 4 0 Device Tampering 0 0 LED indication Off 3 0 Open/Close Status Change + Wake Up (1+2 summarized) 5 0 Open/Close Status Change + Device Tampering (1 + 5 summarized) 6 0 Wake Up + Device Tampering (2 + 4 summarized) 2 0 Wake Up 1 0 Open/Close Status Change 1 Sensor Operation Mode This parameter defines if the internal magnet sensor or the external terminal input is detected and used to issue alarm notification. There is always one input active only. The other sensor input the deactivated. 3 1 0 1 0 From To Description 1 0 External Terminal Inputs Used and scene activation disabled 0 0 Internal Magnet Sensor Used and scene activation enabled 5 Range Test after double click Allows to enable the activation of a Z-Wave range test with double clicking the tamper switch. 3 1 0 1 0 From To Description 1 0 Enabled 0 0 Disabled 6 2nd Association Group Trigger This parameter defines the status of the magnet switch that causes sending a BASIC command to all devices of Association Group 2. 3 1 0 2 0 From To Description 2 0 Switch after Close 1 0 Switch after Open 0 0 Switch after Open and Close 3 Sensor State Polarity This parameter defines the polarity of the magnet sensor. 3 1 0 1 0 From To Description 1 0 Opened when Magnet near 0 0 Closed when Magnet near 7 Command Sent to Devices of Association Group 2 This parameter defines which commands is sent to 2nd Association Group 3 1 0 2 2 From To Description 1 0 Off 2 0 On and Off 0 0 On 9 BASIC command "Off event" value This is the BASIC command value sent in case of "Off" event. 2 1 0 255 0 From To Description 255 255 Value 0 99 Value 10 Time Delay of "On" command frame On command is sent after a delay defined in this parameter. 2 2 0 32400 0 From To Description 0 32400 seconds 8 BASIC command "On event" value This is the BASIC command value sent in case of "On" event. 2 1 0 255 255 From To Description 0 99 Value 255 255 Value 11 Time Delay of "Off" command frame Off command is sent after a delay defined in this parameter. 2 2 0 32400 0 From To Description 0 32400 seconds 17 5th Association Group triggers Parameter defines events which result in sending On/Off commands to devices added to the 2nd Association Group. These commands are sent alternately to switch the devices On and Off. Commands represent the values of BASIC SET command frames. 2 1 0 2 0 From To Description 0 0 Switch after Open and Close 1 1 Switch after Open 2 2 Switch after Close 255 Reset Parameter 0 – Nothing happens 0x55555555 – Completely factory reset sensor and send device reset locally notification. All other values – Reset all Parameter settings to their default settings. 2 4 0 1431655765 0 From To Description 1 1431655764 Reset all Parameter settings to their default settings. 1431655765 1431655765 Completely factory reset sensor and send device reset locally notification. 2 Dry Contact Operation Mode Parameter defines how dry contact will operate with the sensor or switch that is connected to the dry contact terminals. 0 - NO Toggle / Follow state will follow the input of the dry contact terminals where OFF is CLOSED, and ON is OPEN. 1 - NC Toggle / Follow state will follow the input of the dry contact terminals where ON is CLOSED, and OFF is OPEN. 2 - NO save state will allow state of sensor to toggle OPEN/CLOSE based on OFF to ON signal. 3 - NC save state will allow state of sensor to toggle OPEN/CLOSE based on ON toOFF signal. 2 1 0 3 0 From To Description 2 2 NO save state will allow state of sensor to toggle OPEN/CLOSE based on OFF to ON signal. 1 1 NC Toggle / Follow state will follow the input of the dry contact terminals where ON is CLOSED, and OFF is OPEN. 0 0 NO Toggle / Follow state will follow the input of the dry contact terminals where OFF is CLOSED, and ON is OPEN. 3 3 NC save state will allow state of sensor to toggle OPEN/CLOSE based on ON toOFF signal.
Texts	ID Description Value 8 Where to find S2 DSK on product The DSK for the S2 inclusion can be found inside the sensors packaging. 1 Classic Inclusion Inclusion 1. Open the housing. 2. Remove the battery protection. 3. Press the tamper on the side of the appliance three times quickly. 2 Classic Exclusion Exclusion 1. Open the housing. 2. Press the tamper on the side of the appliance three times quickly. 5 Factory Reset Procedure Reset to factory default This device also allows to be reset without any involvement of a Z-Wave controller. This procedure should only be used when the primary controller is inoperable. Once Cover is removed and the tamper switch is tripped, push the tamper for 5 seconds until the RED LED blinks once. Then release tamper and push it again for 5 seconds while the RED LED is blinking until the GREEN LED blinks once. 4 Wake-Up Procedure The Node Information Frame (NIF) is the business card of a Z-Wave device. It contains information about the device type and the technical capabilities. The inclusion and exclusion of the device is confirmed by sending out a Node Information Frame. Beside this it may be needed for certain network operations to send out a Node Information Frame. To issue a NIF execute the following action: Press the tamper once
Supported Notification Types	Notification Type Event / State Access Control Door state: Window/door is open Access Control Door state: Window/door is closed Home Security Cover status: Tampering, product cover removed
Supports NWI	Yes
Supports Explorer Frames	Yes
Supports SmartStart	Yes