Smart LED dimmer Z-Wave 250W – Z-Wave Alliance Product Catalog

Back to Listing

Product Recognition

Certification Number

ZC10-20076947

Name

Smart LED dimmer Z-Wave 250W

Short Description

ECO-DIM.10 Z-Wave is a smart module dimmer for LED lights.

Long Description

ECO-DIM.10 Z-Wave is a smart module dimmer for LED lights. The dimmer module has a range of 250W LED and beside LED lights also able to dim 230V halogen and incandescent bulds, dimable LED-drivers and electronic transfomers. The minimum and maximum light level of the dimmer can be adjusted by the MIN and MAX potentiometer, also the speed of dimming by a pulse switch is adjustable by the SPEED potentiometer. The ECO-DIM.10 is protected against overload and interference signals. For the installation of the ECO-DIM.10 Z-Wave you only need two wires, three wire installation (with extra neutral wire) is available, but not required. It is suitable for all smarthome systems based on Z-Wave (plus) protocol. The smart dimmer module is compatible with 95% of all dimmable LED lights.

Brand

EcoDim BV

Product Identifier

ECO-DIM.10 Z-Wave

Product Line

LED Dimmer

OEM Version

HW: 1 FW: 1.10

Hardware Platform

ZM5101

Z-Wave Version

6.81.03

Library Type

SLAVE_ENHANCED_232

Device Type

Light Dimmer Switch

Role Type

ROLE_TYPE_SLAVE_ALWAYS_ON

Manufacturer ID

0x0431

Product Type ID

0x0202

Product ID

0x0002

User Icon

0x0600

Installer Icon

0x0600

Frequency Plans

EU: 869.85MHz, 868.40MHz

Categories

All Lighting Devices, Dimming Lighting Devices, Lighting Accessories

Countries / Regions

European Union

Supported Command Classes

Controlled Command Classes

S2 Classes

S2_UNAUTHENTICATED, S2_AUTHENTICATED

Documents

Features

Association Groups

Configuration Parameters

Texts

ID	Description	Value
3	Controller Learn Mode	1. Power on the dimmer controller, press and hold down the reset button for over 4 seconds, it will set the dimmer controller into inclusion mode.25 seconds timeout if there is no reply from the Z-Wave primary controller, repeat the operation. 2. The dimmer controller will be added to the Z-Wave network.
23	Controller Classic Inclusion	1. Set primary controller/gateway into inclusion mode (If you don’t know how to do this, Please refer to your primary controller’s manual on how to turn your controller into inclusion mode). 2. Power on the dimmer controller, press and hold down the reset button for over 4 seconds, it will set the dimmer controller into inclusion mode.25 seconds timeout if there is no reply from the Z-Wave primary controller, repeat the operation. 3. The dimmer controller will be added to the Z-Wave network.
24	Controller Classic Exclusion	1. Set primary controller/gateway into exclusion mode (If you don’t know how to do this, Please refer to your primary controller’s manual on how to turn your controller into exclusion mode). 2. Power on the dimmer controller again, it will set the dimmer controller into exclusion mode (The dimmer controller already exists a Z-Wave network). 25 seconds timeout if there is no reply from the Z-Wave primary controller, repeat the operation. 3. The dimmer controller will be removed from the Z-Wave network.
8	Where to find S2 DSK on product	The Dimmer has a DSK string, you can key in first five digit to increment SmartStart process, or you can scan QR code. The QR code can be found on the Dimmer controller or in the box. Ex: 65286-19008-32952-20593- 44872-18102-41266-46651
1	Classic Inclusion	1. Remove the device from previous Z-Wave network if it has already been added to, otherwise pairing mode will be fail. 2. Double Press the reset button. 3. The indicator will start blinking blue and stay solid for 10s when pairing succeed, timeout 15mins.
2	Classic Exclusion	Method 1. From your Z-Wave hub interface, choose to delete or reset the device as instructed. Method 2. Remove from the Device, see below instructions. 1）. Press the reset button for 3 times. 2）. The indicator will start blinking purple and stay solid for 10s when remove done, timeout 3mins.
5	Factory Reset Procedure	1. Press the reset button for 5s. 2. When the Indicator stay in Red for 10s, reset finished
6	Other Special Features	1) Min./Max./Dimming Speed adjustment For the SMART dimmer to work optimally or suitable for your preference, you can adjust the brightness at the Min. and Max. level and also the dimming speed with the MIN./MAX./Dimming Speed adjustment. - MIN adjustment: Switch on the lights. When the lights are on, insert a screwdriver in MIN and turn to the left. When the light becomes unsteady, turn slightly back to the right so that the light remains steady. - MAX adjustment: Switch on the lights. When the lights are on, insert a screwdriver in MAX and turn to the right. When the light becomes unsteady, turn slightly back to the left so that the light remains steady. - Dimming Speed adjustment: Insert a screwdriver in Speed, clockwise to increase the dimming speed when you push the momentary switch, vice versa.

Supported / Controlled Meter Types

Supports NWI

Yes

Supports Explorer Frames

Yes

Supports SmartStart

Yes

Radio Range Z-Wave (m)