Ring Keypad v2 – Z-Wave Alliance Product Catalog

Back to Listing

Product Recognition

Certification Number

ZC12-21040219

Name

Ring Keypad v2

Short Description

Ring Alarm Keypad is a wireless accessory for the Ring Alarm system which provides users the ability to arm and disarm their system, view system status, and manage alarm conditions.

Long Description

Ring Alarm Keypad is a wireless accessory for the Ring Alarm system which provides users the ability to arm and disarm their system, view system status, and manage alarm conditions. After installing the Keypad and setting up the Keypad in the Ring app, perform arming and disarming actions as well as receive system indications for different status updates and events. The Ring Alarm Base Station is required to enable Keypad features and functions within the Ring app.

Brand

Ring

Product Identifier

Keypad v2

Product Line

Ring Alarm

OEM Version

HW: 1 FW: 1.08

Hardware Platform

EFR32Z

Z-Wave Version

7.12.4

Library Type

SLAVE_ENHANCED_232

Device Type

Entry Control Keypad Device

Role Type

ROLE_TYPE_SLAVE_SLEEPING_LISTENING

Manufacturer ID

0x0346

Product Type ID

0x0101

Product ID

0x0301

User Icon

0x2001

Installer Icon

0x2001

Frequency Plans

EU: 869.85MHz, 868.40MHz

Categories

Security Add-Ons

Countries / Regions

European Union

Supported Command Classes

S2 Classes

S2_ACCESS_CONTROL

Documents

Features

Association Groups

Configuration Parameters

Parameter Number

Name

Description

Format

Flag Advanced

Size

Min Value

Max Value

Default Value

Parameter Values

Heartbeat Interval

This parameter is the number minutes between heartbeats. Heartbeats are automatic battery reports on a timer after the last event.

Yes

From	To	Description
1	70	This parameter is the interval between heartbeats in minutes.

Application Retries

Number of application level retries attempted for messages either not ACKed or messages encapsulated via supervision get that did not receive a report.

Yes

From	To	Description
0	5	This parameter is the number of application level retries attempted for messages

Application Level Retry Base Wait Time Period

The number base seconds used in the calculation for sleeping between retry messages.

Yes

From	To	Description
1	60	This parameter is the Base seconds used in the calculation for sleeping between retry messages.

Announcement Audio Volume

Announce audio volume adjustment

Yes

From	To	Description
0	10	This parameter is the Announce audio volume adjustment

Key Tone Volume

Key Tone Volume adjustment

Yes

From	To	Description
0	10	This parameter is the Key Tone Volume adjustment

Siren Volume

Siren Volume adjustment

Yes

From	To	Description
0	10	This parameter is the Siren Volume adjustment

Long press emergency duration (seconds)

This parameter allows a user to configure the duration in seconds for the hold time required to capture a long press . This includes Emergency Buttons + Mode Buttons (Police, Fire, Medical, Disarmed, Home, Away)

Yes

From	To	Description
2	5	This parameter is the special key long press duration - hold time required to capture a long press in seconds.

Long press number pad duration (seconds)

This parameter allows a user to configure the duration in seconds for the hold time required to capture a long press . This includes Number Pad + Check & X (0-9, Check, X)

Yes

From	To	Description
2	5	This parameter is the hold time required to capture a long press in seconds.

Calibrate Speaker

When set to 1, calibrates the speaker

Yes

From	To	Description
0	1	This parameter is the Speaker calibration value.

Texts

ID	Description	Value
3	Controller Learn Mode	Learn Mode Learn Mode allows you to add a controller to an existing Z-Wave network. When a controller enters Learn Mode, it looks for another controller to communicate with. To enter Learn Mode: 1. Open the menu, then tap Devices. 2. Tap Protect. 3. Tap the Ring Protect Base Station. 4. Tap Settings. 5. Tap Advanced Options. 6. Tap Z-Wave. 7. Tap Learn Mode. 8. Tap Enter Learn Mode.
10	Controller Replication	TBD
23	Controller Classic Inclusion	TBD
24	Controller Classic Exclusion	TBD
8	Where to find S2 DSK on product	the 5-digit DSK PIN found on the package of the Ring Alarm Keypad or the 5-digit DSK PIN found under the QR code on the device.
1	Classic Inclusion	Classic Inclusion should be used if the controller does not support SmartStart. 1. Initiate add flow for Security Devices in the Ring mobile application – Follow the guided add flow instructions provided in the Ring mobile application. 2. Select add manually and enter the 5-digit DSK PIN found on the package of the Ring Alarm Keypad or the 5-digit DSK PIN found under the QR code on the device. 3. After powering on the device, press and hold the #1 button for ~3 seconds. Release the button and the device will enter Classic inclusion mode which implements both classic inclusion with a Node Information Frame, and Network Wide Inclusion. During Classic Inclusion mode, the green Connection LED will blink three times followed by a brief pause, repeatedly. When Classic inclusion times-out, the device will blink alternating red and green a few times.
2	Classic Exclusion	1. Initiate remove “Ring Alarm Keypad” flow in the Ring Alarm mobile application – Select the settings icon from device details page and choose “Remove Device” to remove the device. This will place the controller into Remove or “Z-Wave Exclusion” mode. 2. Locate the pinhole reset button on the back of the device. 3. With the controller in Remove (Z-Wave Exclusion) mode, use a paper clip or similar object and tap the pinhole button. The device’s Connection LED turns on solid red to indicate the device was removed from the network.
5	Factory Reset Procedure	Factory Default Instructions 1. To restore Ring Alarm Keypad to factory default settings, locate the pinhole reset button on the device. This is found on the back of the device after removing the back bracket. 2. Using a paperclip or similar object, insert it into the pinhole, press and hold the button down for 10 seconds. 3. The device’s Connection icon LED will rapidly blink green continuously for 10 seconds. After about 10 seconds, when the green blinking stops, release the button. The red LED will turn on solid to indicate the device was removed from the network. Note Use this procedure only in the event that the network primary controller is missing or otherwise inoperable.
4	Wake-Up Procedure	Not applicable. Ring Alarm Keypad (LSS) is a Frequently Listening Receiver Slave (FLiRS) device and does not support Wake Up Command Class.

Supported Notification Types

Supports NWI

Yes

Supports Explorer Frames

Yes

Is Flirs

Yes

Supports SmartStart

Yes

Radio Range Z-Wave (m)