Product Recognition | |
|---|
Certification Number | ZC10-21107057 |
|---|
Name | In-Wall Tamper Resistant Smart Outlet |
|---|
Short Description | Z-Wave Plus™ In-Wall Smart Receptacle replaces existing light switch and allows remote control from any Z-Wave™ certified hub. |
|---|
Long Description | Z-Wave Plus™ In-Wall Smart Receptacle replaces existing light switch and allows remote control from any Z-Wave™ certified hub. |
|---|
Brand | iDevices |
|---|
Product Identifier | 61304/ZW1002 |
|---|
Product Line | Wireless Lighting Controls |
|---|
OEM Version | HW: 255 FW: 5.51 |
|---|
Hardware Platform | ZM5202 |
|---|
Z-Wave Version | 6.82.00 |
|---|
Library Type | SLAVE_ENHANCED_232 |
|---|
Device Type | On/Off Power Switch |
|---|
Role Type | ROLE_TYPE_SLAVE_ALWAYS_ON |
|---|
Manufacturer ID | 0x0458 |
|---|
Product Type ID | 0x4952 |
|---|
Product ID | 0x3235 |
|---|
User Icon | 0x0700 |
|---|
Installer Icon | 0x0702 |
|---|
Frequency Plans | US: 916.00MHz, 908.40MHz |
|---|
Categories | All Lighting Devices, On/Off Switches/Devices, Lighting Accessories |
|---|
Countries / Regions | United States of America |
|---|
Supported Command Classes | Identifier | Name | Key | Version |
|---|
COMMAND_CLASS_CONFIGURATION_V4 | Configuration V4 | 0x70 | 4 | COMMAND_CLASS_FIRMWARE_UPDATE_MD_V4 | Firmware Update Meta-Data V4 | 0x7A | 4 | COMMAND_CLASS_SCENE_ACTUATOR_CONF | Scene Actuator Conf | 0x2C | 1 | COMMAND_CLASS_SWITCH_BINARY_V2 | Switch Binary V2 | 0x25 | 2 | COMMAND_CLASS_POWERLEVEL | Powerlevel | 0x73 | 1 | COMMAND_CLASS_APPLICATION_STATUS | Application Status | 0x22 | 1 | COMMAND_CLASS_TRANSPORT_SERVICE_V2 | Transport Service V2 | 0x55 | 2 | COMMAND_CLASS_DEVICE_RESET_LOCALLY | Device Reset Locally | 0x5A | 1 | COMMAND_CLASS_ZWAVEPLUS_INFO_V2 | Z-Wave Plus Info V2 | 0x5E | 2 | COMMAND_CLASS_ASSOCIATION_V2 | Association V2 | 0x85 | 2 | COMMAND_CLASS_ASSOCIATION_GRP_INFO | Association Group Info | 0x59 | 1 | COMMAND_CLASS_BASIC_V2 | Basic V2 | 0x20 | 2 | COMMAND_CLASS_SECURITY_2 | Security S2 | 0x9F | 1 | COMMAND_CLASS_VERSION_V3 | Version V3 | 0x86 | 3 | COMMAND_CLASS_CENTRAL_SCENE_V3 | Central Scene V3 | 0x5B | 3 | COMMAND_CLASS_SUPERVISION | Supervision | 0x6C | 1 | COMMAND_CLASS_SCENE_ACTIVATION | Scene Activation | 0x2B | 1 | COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2 | Manufacturer Specific V2 | 0x72 | 2 |
|
|---|
Controlled Command Classes | Identifier | Name | Key | Version |
|---|
COMMAND_CLASS_BASIC_V2 | Basic V2 | 0x20 | 2 |
|
|---|
S2 Classes | S2_UNAUTHENTICATED, S2_AUTHENTICATED |
|---|
Documents | Category | Description | File |
|---|
Manual_Primary_Lang | Product Manual | |
|
|---|
Features | Feature | Values |
|---|
Firmware Updatable | Value |
|---|
Updatable by Consumer by RF |
| Neutral Wire Required | | Switch Load Capacity Current | | Switch Load Capacity Watts | | Switch Type | Value |
|---|
Push Button Illuminated |
|
|
|---|
Association Groups | Group Number | Maximum Nodes Supported | End Point ID | Group Name | Description |
|---|
1 | 5 | 0 | Lifeline | Z-Wave Plus Lifeline | 2 | 5 | 0 | Single Press | Association Group 2 supports basic set and is controlled by single pressing the button | 3 | 5 | 0 | Double Press | Association Group 3 supports basic set and is controlled by double pressing the button |
|
|---|
Configuration Parameters | Parameter Number | Name | Description | Format | Read-only | Size | Min Value | Max Value | Default Value | Parameter Values |
|---|
3 | LED Light | LED Light | 1 | Yes | 1 | 0 | 2 | 1 | From | To | Description |
|---|
0 | 0 | LED On when load is Off, Led Off when load is On | 1 | 1 | LED On when load is On, LED Off when load is Off (Default) | 2 | 2 | LED always off |
|
|
|---|
Texts | ID | Description | Value |
|---|
8 | Where to find S2 DSK on product | Page 1 section 4.
If prompted by the controller to enter the S2 security code, refer to the QR code/security
number on the side of the box or the QR code label on the product (see Figure 1). Enter the
5-digit pin code. | 1 | Classic Inclusion | Adding your device to a Z-Wave network
1. Follow the instructions for your Z-Wave certified controller to add a device to the Z-Wave
network.
2. Once the controller is ready to add your device, press and release the program button. | 2 | Classic Exclusion | To remove and reset the device
1. Follow the instructions for your Z-Wave certified controller to remove a device from
the Z-Wave network.
2. Once the controller is ready to remove your device, press and release program
button of the smart outlet. | 5 | Factory Reset Procedure | To return your switch to factory defaults
Press the program button five times, then press the program butotn for at least three seconds.
The LED will blink five times to confirm.
NOTE: This should only be used in the event your networks’ primary controller is missing or
otherwise inoperable. |
|
|---|
Supports NWI | Yes |
|---|
Supports Explorer Frames | Yes |
|---|
Supports SmartStart | Yes |
|---|
Radio Range Z-Wave (m) | 40 |
|---|
