COMMAND_CLASS_CONFIGURATION_V4

Configuration V4

0x70

4

COMMAND_CLASS_POWERLEVEL

Powerlevel

0x73

1

COMMAND_CLASS_ASSOCIATION_GRP_INFO_V3

Association Group Information (AGI) V3

0x59

3

COMMAND_CLASS_DOOR_LOCK_V4

Door Lock V4

0

COMMAND_CLASS_INDICATOR_V3

Indicator V3

0x87

3

COMMAND_CLASS_BATTERY

Battery

0x80

1

COMMAND_CLASS_FIRMWARE_UPDATE_MD_V5

Firmware Update Meta Data V5

0x7A

5

COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3

Multi Channel Association V3

0x8E

3

COMMAND_CLASS_SECURITY_2

Security 2

0x9F

1

COMMAND_CLASS_SECURITY

Security 0

0x98

1

COMMAND_CLASS_TRANSPORT_SERVICE_V2

Transport Service V2

0x55

2

COMMAND_CLASS_DEVICE_RESET_LOCALLY

Device Reset Locally

0x5A

1

COMMAND_CLASS_ZWAVEPLUS_INFO_V2

Z-Wave Plus Info V2

0x5E

2

COMMAND_CLASS_ASSOCIATION_V2

Association V2

0x85

2

COMMAND_CLASS_BASIC_V2

Basic V2

0x20

2

COMMAND_CLASS_VERSION_V3

Version V3

0x86

3

COMMAND_CLASS_SUPERVISION

Supervision

0x6C

1

COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2

Manufacturer Specific V2

0x72

2

Manual_Primary_Lang

Product Manual in Japanese

Manual_English

Product Manual in English

1

5

0

Lifeline

Association Group 1 (Lifeline)

1

Buzzer On/Off

Buzzer On/Off

2

1

0

1

1

8

Where to find S2 DSK on product

You can check the DSK code and QR code on the label by removing the Top cover of this product.

1

Classic Inclusion

1. Set the controller in "Add (Inclusion)" mode. (For the operation procedure, see the instruction manual of the controller.) 2. Press the lock operation switch once with a thin stick and release it immediately. The registration operation starts with a single beeping sound. 3. The connection is complete when the LED blinks from blue to green. Check the connection using the controller or a dedicated application.

2

Classic Exclusion

1. Set the controller in "Remove (Exclusion)" mode. 2. Remove the top cover and press the lock operation switch once with a thin stick and release it immediately. The LED turns yellow once with a beeping sound. 3. The disconnection is complete when the LED blinks blue. Check the Exclusion using the controller or the dedicated application.

4

Wake-Up Procedure

Set the lock position and unlock position of the thumb turn knob. ■Insert the batteries Remove the top cover, remove the battery holder, and insert four batteries. Attach the battery holder with the battery inserted to the lock body. The LED flashes green with a confirmation sound. Leave the top cover removed. * Be sure to use 4 batteries. Also, do not use batteries that are in use and new batteries together. ■Setting the thumb turn knob rotation direction ◇Start setting Press and release the operation switch on the left side of the lock body with a thin stick for 5 seconds or longer. The LED will light up light blue once and long beep. After that, the LED will blink light blue. ◇Unlocking position setting Turn the thumb turn knob of this unit to the unlocked position. Press and release the operation switch on the left side of the lock body with a thin stick for 5 seconds or longer. The LED will red once and beep twice. After that, the LED will blink light blue. ◇Locking position setting Turn the thumb turn knob of this unit to the locked position. Press and release the operation switch on the left side of the lock body with a thin stick for 5 seconds or longer. The LED will blue once and beep once. After that, the LED will blink light blue. ◇Positioning With the thumb turn knob locked, use a thin stick to press and release the operation switch on the left side of the lock body for 5 seconds or longer. The LED will light blue once and beep three times.

5

Factory Reset Procedure

Remove the top cover, press and release the operation switch on the left side of the lock body with a thin stick for 5 seconds or longer. The Factory Reset is complete when the LED blinks blue. Please use this procedure only in the event that the primary controller is lost. All the settings and the controller information are cleared to return to the factory default.