Product Recognition | |
|---|
Certification Number | ZC14-24040421 |
|---|
Name | Plug-in Dimmer Outlet |
|---|
Short Description | The LAMP-ZW2 is an 800 series Z-Wave plugin dimmer featuring S2 authentication and SmartStart for easy pairing. And with a built-in signal repeater it can extend the wireless coverage of your Z-Wave hub up to 1300 feet. |
|---|
Long Description | PRODUCT HIGHLIGHTS:
- Manual or Z-Wave® on/off and brightness control
- 800 series Z-Wave® chip for better range and faster control
- Night light mode: press down when off to turn lights on to 20%
- Z-Wave® Long Range for ultra reliable no-mesh communication
- Built-in Z-Wave® range test tool and signal repeater
- Works with LED and incandescent bulbs (don’t use with tubes)
SPECIFICATIONS:
- Model Number: LAMP-ZW2
- Region: US/CA/MX
- Power: 120 VAC, 60 Hz
- Maximum Load: 100W LED bulbs, 200W Incandescent; Do NOT connect to tube lights, fans, or switched receptacles
- Range: Up to 500 feet line of sight
- Operating Temperature: 32-104° F (0-40° C)
- Installation and Use: Indoor only |
|---|
Brand | Versa |
|---|
Product Identifier | LAMP-ZW2 |
|---|
Product Line | Light Switches |
|---|
OEM Version | HW: 01 FW: 01.00 |
|---|
Hardware Platform | EFR32ZG23A |
|---|
Z-Wave Version | 7.19.3 |
|---|
Library Type | END_NODE_ENHANCED_232 |
|---|
Device Type | Multilevel Switch DT |
|---|
Role Type | ROLE_TYPE_END_NODE_ALWAYS_ON |
|---|
Manufacturer ID | 0x0464 |
|---|
Product Type ID | 0xFF00 |
|---|
Product ID | 0xFF0D |
|---|
User Icon | 0x0600 |
|---|
Installer Icon | 0x0600 |
|---|
Frequency Plans | US: 916.00MHz, 908.40MHz, US_LR: 912.00MHz, 920.00MHz |
|---|
Categories | Dimming Lighting Devices |
|---|
Countries / Regions | Canada, Mexico, United States of America |
|---|
Supported Command Classes | Identifier | Name | Key | Version |
|---|
COMMAND_CLASS_BASIC_V2 | Basic V2 | 0x20 | 2 | COMMAND_CLASS_CONFIGURATION_V4 | Configuration V4 | 0x70 | 4 | COMMAND_CLASS_SWITCH_MULTILEVEL_V4 | Multilevel Switch V4 | 0x26 | 4 | COMMAND_CLASS_ASSOCIATION_V2 | Association V2 | 0x85 | 2 | COMMAND_CLASS_ASSOCIATION_GRP_INFO_V3 | Association Group Information (AGI) V3 | 0x59 | 3 | COMMAND_CLASS_DEVICE_RESET_LOCALLY | Device Reset Locally | 0x5A | 1 | COMMAND_CLASS_FIRMWARE_UPDATE_MD_V5 | Firmware Update Meta Data V5 | 0x7A | 5 | COMMAND_CLASS_INDICATOR_V3 | Indicator V3 | 0x87 | 3 | COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2 | Manufacturer Specific V2 | 0x72 | 2 | COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3 | Multi Channel Association V3 | 0x8E | 3 | COMMAND_CLASS_VERSION_V3 | Version V3 | 0x86 | 3 | COMMAND_CLASS_ZWAVEPLUS_INFO_V2 | Z-Wave Plus Info V2 | 0x5E | 2 | COMMAND_CLASS_SECURITY_2 | Security 2 | 0x9F | 1 | COMMAND_CLASS_SUPERVISION | Supervision | 0x6C | 1 | COMMAND_CLASS_TRANSPORT_SERVICE_V2 | Transport Service V2 | 0x55 | 2 | COMMAND_CLASS_POWERLEVEL | Powerlevel | 0x73 | 1 |
|
|---|
S2 Classes | S2_AUTHENTICATED, S2_UNAUTHENTICATED |
|---|
Documents | Category | File |
|---|
Manual_English | |
|
|---|
Features | Feature | Values |
|---|
Color | | Electric Load Type | Value |
|---|
Incandescent | Dimmable LED |
| Firmware Updatable | Value |
|---|
Updatable by Consumer by RF |
| Neutral Wire Required | | Switch Load Capacity Watts | | Z-Wave Scene Type | |
|
|---|
Association Groups | Group Number | Maximum Nodes Supported | End Point ID | Group Name | Profile |
|---|
1 | 5 | 0 | Lifeline | 0x0001 | 2 | 5 | 0 | Single Press button | 0x2001 |
|
|---|
Configuration Parameters | Parameter Number | Name | Description | Format | Size | Min Value | Max Value | Default Value |
|---|
3 | LED light mode | Set the LED Light Mode. | 1 | 1 | 0 | 0 | 0x01 | 31 | Maximum Brightness Threshold | Maximum Brightness Threshold. | 1 | 1 | 0 | 0 | 0x63 | 41 | LED brightness | Set the LED brightness. | 1 | 1 | 0 | 0 | 0x00 | 84 | Reset Factory Default | Reset Switch to Factory Defaults. | 1 | 1 | 0 | 0 | 0x00 |
|
|---|
Texts | ID | Description | Value |
|---|
8 | Where to find S2 DSK on product | SCAN THE QR CODE / ENTER THE 5-DIGIT DSK, visual arrow pointing to the DSK PIN code on the switch | 1 | Classic Inclusion | The device support two methods of inclusion, When using a Z-Wave Plus® certified controller choose Network Wide Inclusion or SmartStart.
TAP the button once times to ADD/INCLUDE the device.
Network Wide Inclusion To A Z-Wave® Network
TAP the button once times to REMOVE/EXCLUDE the device
Refer to your primary controller instructions to process the inclusion / exclusion setup procedure.
When prompted by your primary controller, click the Z-Wave button one times . . | 2 | Classic Exclusion | The device support two methods of inclusion, When using a Z-Wave Plus® certified controller choose Network Wide Inclusion or SmartStart.
TAP the button once times to ADD/INCLUDE the device.
Network Wide Inclusion To A Z-Wave® Network
TAP the button once times to REMOVE/EXCLUDE the device
Refer to your primary controller instructions to process the inclusion / exclusion setup procedure.
When prompted by your primary controller, click the Z-Wave button one times . . | 5 | Factory Reset Procedure | 2. Factory Reset：Remove the switch from power. Press and hold the manual button, plug the switch in and continue holding the manual button for 3 seconds.
Note: Please use this procedure only when the network primary controller is missing or otherwise inoperable. |
|
|---|
Supports NWI | Yes |
|---|
Supports Explorer Frames | Yes |
|---|
Supports SmartStart | Yes |
|---|
Radio Range Z-Wave (m) | 40 |
|---|
Radio Range Z-Wave LR (m) | 400 |
|---|
