COMMAND_CLASS_BASIC_V2

Basic V2

0x20

2

COMMAND_CLASS_CONFIGURATION_V4

Configuration V4

0x70

4

COMMAND_CLASS_SWITCH_MULTILEVEL_V4

Multilevel Switch V4

0x26

4

COMMAND_CLASS_ASSOCIATION_V2

Association V2

0x85

2

COMMAND_CLASS_ASSOCIATION_GRP_INFO_V3

Association Group Information (AGI) V3

0x59

3

COMMAND_CLASS_DEVICE_RESET_LOCALLY

Device Reset Locally

0x5A

1

COMMAND_CLASS_FIRMWARE_UPDATE_MD_V5

Firmware Update Meta Data V5

0x7A

5

COMMAND_CLASS_INDICATOR_V3

Indicator V3

0x87

3

COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2

Manufacturer Specific V2

0x72

2

COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3

Multi Channel Association V3

0x8E

3

COMMAND_CLASS_VERSION_V3

Version V3

0x86

3

COMMAND_CLASS_ZWAVEPLUS_INFO_V2

Z-Wave Plus Info V2

0x5E

2

COMMAND_CLASS_SECURITY_2

Security 2

0x9F

1

COMMAND_CLASS_SUPERVISION

Supervision

0x6C

1

COMMAND_CLASS_TRANSPORT_SERVICE_V2

Transport Service V2

0x55

2

COMMAND_CLASS_POWERLEVEL

Powerlevel

0x73

1

Manual_English

Color

Electric Load Type

Firmware Updatable

Neutral Wire Required

Switch Load Capacity Watts

Z-Wave Scene Type

1

5

0

Lifeline

0x0001

2

5

0

Single Press button

0x2001

3

LED light mode

Set the LED Light Mode.

1

1

0

0

0x01

31

Maximum Brightness Threshold

Maximum Brightness Threshold.

1

1

0

0

0x63

41

LED brightness

Set the LED brightness.

1

1

0

0

0x00

84

Reset Factory Default

Reset Switch to Factory Defaults.

1

1

0

0

0x00

8

Where to find S2 DSK on product

SCAN THE QR CODE / ENTER THE 5-DIGIT DSK, visual arrow pointing to the DSK PIN code on the switch

1

Classic Inclusion

The device support two methods of inclusion, When using a Z-Wave Plus® certified controller choose Network Wide Inclusion or SmartStart. TAP the button once times to ADD/INCLUDE the device. Network Wide Inclusion To A Z-Wave® Network TAP the button once times to REMOVE/EXCLUDE the device Refer to your primary controller instructions to process the inclusion / exclusion setup procedure. When prompted by your primary controller, click the Z-Wave button one times . . The device is compatible with SmartStart. SmartStart enabled products can be added into a Z-Wave® network by scanning the Z-Wave QR Code found on the top of the outlet or the back of the box with a controller providing SmartStart inclusion. No further action is required and the SmartStart product will be added automatically within 10 minutes of being switched on and in the network vicinity. Note: Z-Wave Long Range device can only support be included via SmartStart.Extract the DSK from end device and paste itinto the Dsk Value in PC Controller, make sure the Long Range' option is ticked.

2

Classic Exclusion

The device support two methods of inclusion, When using a Z-Wave Plus® certified controller choose Network Wide Inclusion or SmartStart. TAP the button once times to ADD/INCLUDE the device. Network Wide Inclusion To A Z-Wave® Network TAP the button once times to REMOVE/EXCLUDE the device Refer to your primary controller instructions to process the inclusion / exclusion setup procedure. When prompted by your primary controller, click the Z-Wave button one times . . The device is compatible with SmartStart. SmartStart enabled products can be added into a Z-Wave® network by scanning the Z-Wave QR Code found on the top of the outlet or the back of the box with a controller providing SmartStart inclusion. No further action is required and the SmartStart product will be added automatically within 10 minutes of being switched on and in the network vicinity. Note: Z-Wave Long Range device can only support be included via SmartStart.Extract the DSK from end device and paste itinto the Dsk Value in PC Controller, make sure the Long Range' option is ticked.

5

Factory Reset Procedure

Factory Reset：Remove the switch from power. Press and hold the manual button, plug the switch in and continue holding the manual button for 3 seconds. Note: Please use this procedure only when the network primary controller is missing or otherwise inoperable.