Product Recognition | |
|---|
Certification Number | ZC14-24090471 |
|---|
Name | Temperature Humidity XS Sensor |
|---|
Short Description | Use the Temperature Humidity XS Sensor to get real time data about air quality inside and outside of your home. |
|---|
Long Description | PRODUCT HIGHLIGHTS:
- Monitor temperature and humidity via Z-Wave
- NEW 800 series chip for faster communication and more battery life than ever
- Z-Wave Long Range for ultra reliable no-mesh communication
- Snap-in mounting bracket
- Powered by a single coin battery
- The latest S2 security and SmartStart for secure set-up
- Supports OTA firmware updates
PRODUCT SPECIFICATIONS:
- Model Number: ZSE44 800LR
- Power: 1 x CR2450 battery
- Operating Temperature: 40°-90° F
- Dimensions: 2.2” x 1.3” x 0.2”
- Range: Up to 150 feet (up to 1300' with Long Range) line of sight
- Installation and Use: Indoor or outdoor under eve (can’t be exposed to direct rainfall or sun, a little splash is OK) |
|---|
Brand | Zooz |
|---|
Product Identifier | ZSE44 800LR |
|---|
Product Line | XS Sensors |
|---|
OEM Version | HW: 02 FW: 02.00 |
|---|
Hardware Platform | EFR32ZG23A |
|---|
Z-Wave Version | 7.19.3 |
|---|
Library Type | END_NODE_ENHANCED_232 |
|---|
Device Type | Notification Sensor DT |
|---|
Role Type | ROLE_TYPE_END_NODE_SLEEPING_REPORTING |
|---|
Manufacturer ID | 0x027A |
|---|
Product Type ID | 0x7000 |
|---|
Product ID | 0xE004 |
|---|
User Icon | 0x0CFF |
|---|
Installer Icon | 0x0CFF |
|---|
Frequency Plans | US: 916.00MHz, 908.40MHz, US_LR: 912.00MHz, 920.00MHz |
|---|
Categories | Sensors |
|---|
Countries / Regions | Canada, Mexico, United States of America |
|---|
Supported Command Classes | Identifier | Name | Key | Version |
|---|
COMMAND_CLASS_CONFIGURATION_V4 | Configuration V4 | 0x70 | 4 | COMMAND_CLASS_NOTIFICATION_V8 | Notification V8 | 0x71 | 8 | COMMAND_CLASS_ASSOCIATION_V2 | Association V2 | 0x85 | 2 | COMMAND_CLASS_ASSOCIATION_GRP_INFO_V3 | Association Group Information (AGI) V3 | 0x59 | 3 | COMMAND_CLASS_BATTERY | Battery | 0x80 | 1 | COMMAND_CLASS_DEVICE_RESET_LOCALLY | Device Reset Locally | 0x5A | 1 | COMMAND_CLASS_FIRMWARE_UPDATE_MD_V5 | Firmware Update Meta Data V5 | 0x7A | 5 | COMMAND_CLASS_INDICATOR_V3 | Indicator V3 | 0x87 | 3 | COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2 | Manufacturer Specific V2 | 0x72 | 2 | COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3 | Multi Channel Association V3 | 0x8E | 3 | COMMAND_CLASS_VERSION_V3 | Version V3 | 0x86 | 3 | COMMAND_CLASS_WAKE_UP_V2 | Wake Up V2 | 0x84 | 2 | COMMAND_CLASS_ZWAVEPLUS_INFO_V2 | Z-Wave Plus Info V2 | 0x5E | 2 | COMMAND_CLASS_SECURITY_2 | Security 2 | 0x9F | 1 | COMMAND_CLASS_SUPERVISION | Supervision | 0x6C | 1 | COMMAND_CLASS_TRANSPORT_SERVICE_V2 | Transport Service V2 | 0x55 | 2 | COMMAND_CLASS_POWERLEVEL | Powerlevel | 0x73 | 1 | COMMAND_CLASS_SENSOR_MULTILEVEL_V11 | Multilevel Sensor V11 | 0x31 | 11 |
|
|---|
S2 Classes | S2_AUTHENTICATED, S2_UNAUTHENTICATED |
|---|
Documents | Category | File |
|---|
Manual_English | |
|
|---|
Features | Feature | Values |
|---|
Battery Quantity | | Battery Type | | Firmware Updatable | Value |
|---|
Updatable by Consumer by RF |
|
|
|---|
Association Groups | Group Number | Maximum Nodes Supported | End Point ID | Group Name | Profile |
|---|
1 | 5 | 0 | Lifeline | 0x0001 | 2 | 5 | 0 | Basic Set when temperature is high | 0x2001 | 3 | 5 | 0 | Basic Set when temperature is low | 0x2002 | 4 | 5 | 0 | Basic Set when humidity is high | 0x2003 | 5 | 5 | 0 | Basic Set when humidity is low | 0x2004 |
|
|---|
Configuration Parameters | Parameter Number | Name | Description | Format | Size | Min Value | Max Value | Default Value |
|---|
1 | Battery report threshold | Report threshold of battery level. | 1 | 1 | 0 | 0 | 0x05 | 2 | Battery alarm threshold | Set threshold for low battery report. | 1 | 1 | 0 | 0 | 0x0A | 3 | Temperature report threshold | Threshold between temperature two reports. | 1 | 1 | 0 | 0 | 0x0A | 4 | Humidity report threshold | Threshold between humidity two reports. | 1 | 1 | 0 | 0 | 0x05 | 5 | Temperature high alarm value | High temperature for notification and AGP | 1 | 1 | 0 | 0 | 0xC8 | 6 | Temperature high behavior | Notification,AGP control when T is high. | 1 | 1 | 0 | 0 | 0x07 | 7 | Temperature low alarm value | Low temperature for notification and AGP | 1 | 1 | 0 | 0 | 0x0a | 8 | Temperature low behavior | Notification,AGP control when T is low. | 1 | 1 | 0 | 0 | 0x07 | 9 | Humidity high alarm value | High humidity for notification and AGP | 1 | 1 | 0 | 0 | 0x00 | 10 | Humidity high behavior | Notification,AGP control when H is high. | 1 | 1 | 0 | 0 | 0x07 | 11 | Humidity low alarm value | Low humidity for notification and AGP | 1 | 1 | 0 | 0 | 0x00 | 17 | Humidity report interval | Minutes between humidity two reports. | 1 | 2 | 0 | 0 | 0x00F0 |
|
|---|
Texts | ID | Description | Value |
|---|
8 | Where to find S2 DSK on product | If you’re using an S2 hub, it will ask
you to enter the DSK PIN or scan
the QR code printed on the inside
of the sensor’s battery cover to
complete SmartStart inclusion. | 1 | Classic Inclusion | 1. Initiate inclusion on your hub.
2. While the hub is looking for new devices, click the Z-Wave button 3 times as quickly as possible. The LED indicator will start flashing to confirm inclusion mode and turn off once inclusion is completed. | 2 | Classic Exclusion | 1. Bring the sensor within direct range of your Z-Wave hub.
2. Put the Z-Wave hub into exclusion mode (not sure how to do that? ask@getzooz.com).
3. Click the Z-Wave button 3 times as quickly as possible.
4. Your hub will confirm exclusion and the sensor will disappear from your controller's device list. | 4 | Wake-Up Procedure | Click the Z-Wave button 4 times quickly to wake the sensor up manually. The LED indicator will flash once to confirm the device is awake. During wake-up, the sensor turns the Z-Wave radio on for one minute to receive communication from the hub. | 5 | Factory Reset Procedure | When your network’s primary controller is missing or otherwise inoperable, you may need to reset the device to factory settings manually. In order to complete the process, make sure the sensor is powered, then click the Z-Wave button twice and hold it the third time for 10 seconds. The LED indicator will blink continuously. Immediately after, click the Z-Wave button twice more to finalize the reset. The LED indicator will flash 3 times to confirm a successful reset. |
|
|---|
Supported Notification Types | Notification Type | Event / State |
|---|
Heat Alarm | Heat sensor status: Overheat detected | Heat Alarm | Heat sensor status: Under heat detected | Weather Alarm | Moisture alarm status: Moisture alarm |
|
|---|
Supported Multilevel Sensors | Multilevel Sensor Type |
|---|
Air temperature | Humidity |
|
|---|
Supports NWI | Yes |
|---|
Supports Explorer Frames | Yes |
|---|
Supports SmartStart | Yes |
|---|
Radio Range Z-Wave (m) | 40 |
|---|
Radio Range Z-Wave LR (m) | 400 |
|---|
