Product Recognition | |
|---|
Certification Number | ZC10-25070010 |
|---|
Name | Push-Control |
|---|
Short Description | Universal wireless button. |
|---|
Description | Nice Push-Control is a compact, battery-powered, Z-Wave Plus compatible device. It allows you to control devices through the Z-Wave network and run various scenes defined in Nice Home Management System.
Different actions may be triggered with one to five clicks or by holding the button down. In panic mode, each press of the button results in triggering of the emergency scene.
With its small design and wireless communication, the Push-Control can be conveniently mounted on any surface and in any position or location at home, e.g. beside the bed or under the desk. |
|---|
Brand | Nice |
|---|
Brand Owner | Nice |
|---|
Identifier | NICE Push-Control |
|---|
Product Line | Nice Push-Control |
|---|
OEM Version | HW: 01 FW: 03.02 |
|---|
Hardware Platform | ZM5101A-CME3 |
|---|
Z-Wave Version | 6.51.09 |
|---|
Library Type | END_NODE_ENHANCED_232 |
|---|
Device Type | Wall Controller |
|---|
Role Type | ROLE_TYPE_SLAVE_PORTABLE |
|---|
Manufacturer ID | 0x010F |
|---|
Product Type ID | 0x0F01 |
|---|
Product ID | 0x2000 |
|---|
User Icon | 0x1600 |
|---|
Installer Icon | 0x1600 |
|---|
Radio Range Z-Wave (m) | 40 |
|---|
Frequency Plans | US: 916.00MHz, 908.40MHz |
|---|
Categories | On/Off Switches/Devices |
|---|
Countries / Regions | Canada, Mexico, United States of America |
|---|
Supported Command Classes | Identifier | Name | Key | Version |
|---|
COMMAND_CLASS_SENSOR_ALARM | Alarm Sensor | 0x9C | 1 | COMMAND_CLASS_ASSOCIATION_V2 | Association V2 | 0x85 | 2 | COMMAND_CLASS_ASSOCIATION_GRP_INFO | Association Group Information (AGI) | 0x59 | 1 | COMMAND_CLASS_BATTERY | Battery | 0x80 | 1 | COMMAND_CLASS_CENTRAL_SCENE_V3 | Central Scene V3 | 0x5B | 3 | COMMAND_CLASS_CONFIGURATION | Configuration | 0x70 | 1 | COMMAND_CLASS_CRC_16_ENCAP | CRC-16 Encapsulation | 0x56 | 1 | COMMAND_CLASS_DEVICE_RESET_LOCALLY | Device Reset Locally | 0x5A | 1 | COMMAND_CLASS_FIRMWARE_UPDATE_MD_V3 | Firmware Update Meta Data V3 | 0x7A | 3 | COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2 | Manufacturer Specific V2 | 0x72 | 2 | COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3 | Multi Channel Association V3 | 0x8E | 3 | COMMAND_CLASS_NOTIFICATION_V5 | Notification V5 | 0x71 | 5 | COMMAND_CLASS_POWERLEVEL | Powerlevel | 0x73 | 1 | COMMAND_CLASS_SECURITY | Security 0 | 0x98 | 1 | COMMAND_CLASS_VERSION_V2 | Version V2 | 0x86 | 2 | COMMAND_CLASS_WAKE_UP_V2 | Wake Up V2 | 0x84 | 2 | COMMAND_CLASS_ZWAVEPLUS_INFO_V2 | Z-Wave Plus Info V2 | 0x5E | 2 |
|
|---|
Controlled Command Classes | Identifier | Name | Key | Version |
|---|
COMMAND_CLASS_BASIC | Basic | 0x20 | 1 | COMMAND_CLASS_SWITCH_MULTILEVEL_V3 | Multilevel Switch V3 | 0x26 | 3 |
|
|---|
Documents | Category | File |
|---|
Manual_English | |
|
|---|
Texts | ID | Description | Value |
|---|
1 | Classic Inclusion | To add the device to the Z-Wave network manually:
1. Place Push-Control within the direct range of your Z-Wave hub.
2. Set the main hub in (security/non-security) add mode. For more information, see the hub manual.
3. Click the button six times at least.
4. Wait for the adding process to end.
5. Successful adding is confirmed by the Z-Wave hub message. | 2 | Classic Exclusion | To remove the device from the Z-Wave network:
1. Place Push-Control within the direct range of your Z-Wave hub.
2. Set the main hub in remove mode. For more information, see the hub manual.
3. Click Push-Control at least six times.
4. Wait for the removing process to end.
5. Successful removing is confirmed by the Z-Wave hub message. | 4 | Wake-Up Procedure | Push-Control needs to be woken up to receive information from the hub, about the new configuration of parameters or associations. Click Push-Control four times to wake it up. | 5 | Factory Reset Procedure | To reset the device:
1. Click Push-Control exactly five times.
2. Press and hold Push-Control for at least five seconds. |
|
|---|
Supports NWI | Yes |
|---|
Supports Explorer Frames | Yes |
|---|
