Product Recognition
Certification Number	ZC14-25080545
Name	Wireless Siren & Strobe
Short Description	The Vision Indoor Siren will emit a loud audible alarm and blink a strobe light while receiving an alert or signal from the Z-Wave network.
Description	The Vision Indoor Siren will emit a loud audible alarm and blink a strobe light while receiving an alert or signal from the Z-Wave network. It can work seamlessly with any Z-Wave® enabled controller or system, regardless of the manufacturer, as long as it bears the Z-Wave® logo. When included securely into a Z-Wave® network, all communications to and from the siren are encrypted, ensuring a higher level of security and protection for your smart home. Ideal for enhancing home safety, this siren provides both audio and visual warnings to deter intrusions or signal emergency events. The siren features a built-in self-protection mode - it will automatically activate if the rear cover is opened, ensuring enhanced security. Also it supports over-the-air (OTA) firmware updates, allowing future improvements without physical access. Moreover, a wide range of configurable parameters, enabling personalized settings to meet various installation and usage needs.
Brand	Vision
Brand Owner	Vision
Identifier	ZM1601ANZ-8
Product Line	Z-WAVE 800 series
OEM Version	HW: 03 FW: 20.25:02.03
Hardware Platform	EFR32ZG23A
Z-Wave Version	7.20.3
Library Type	END_NODE_ENHANCED_232
Device Type	Binary Switch DT
Role Type	ROLE_TYPE_END_NODE_SLEEPING_LISTENING
Manufacturer ID	0x0109
Product Type ID	0x2005
Product ID	0x0510
User Icon	0x0F00
Installer Icon	0x0F00
Frequency Plans	ANZ: 919.80MHz, 921.40MHz
Categories	Sensors, Security Systems
Countries / Regions	Australia, Brazil, Chile, Ecuador, El Salvador, Indonesia, Malaysia, New Zealand, Paraguay, Peru, Uruguay, Venezuela, Vietnam
Supported Command Classes	Identifier Name Key Version COMMAND_CLASS_ASSOCIATION_V2 Association V2 0x85 2 COMMAND_CLASS_ASSOCIATION_GRP_INFO_V3 Association Group Information (AGI) V3 0x59 3 COMMAND_CLASS_DEVICE_RESET_LOCALLY Device Reset Locally 0x5A 1 COMMAND_CLASS_FIRMWARE_UPDATE_MD_V5 Firmware Update Meta Data V5 0x7A 5 COMMAND_CLASS_INDICATOR_V3 Indicator V3 0x87 3 COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2 Manufacturer Specific V2 0x72 2 COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3 Multi Channel Association V3 0x8E 3 COMMAND_CLASS_VERSION_V3 Version V3 0x86 3 COMMAND_CLASS_ZWAVEPLUS_INFO_V2 Z-Wave Plus Info V2 0x5E 2 COMMAND_CLASS_SECURITY_2 Security 2 0x9F 1 COMMAND_CLASS_SUPERVISION Supervision 0x6C 1 COMMAND_CLASS_TRANSPORT_SERVICE_V2 Transport Service V2 0x55 2 COMMAND_CLASS_POWERLEVEL Powerlevel 0x73 1 COMMAND_CLASS_SWITCH_BINARY_V2 Binary Switch V2 0x25 2 COMMAND_CLASS_BASIC_V2 Basic V2 0x20 2 COMMAND_CLASS_BATTERY Battery 0x80 1 COMMAND_CLASS_APPLICATION_STATUS Application Status 0x22 1 COMMAND_CLASS_CONFIGURATION_V4 Configuration V4 0x70 4 COMMAND_CLASS_NOTIFICATION_V8 Notification V8 0x71 8
S2 Classes	S2_AUTHENTICATED, S2_UNAUTHENTICATED
Documents	Category Description File Manual_English Add the ® with "Z-Wave Plus" on page 6, sec 11 ZM1601-8_Siren_Manual_20250820.pdf
Association Groups	Group Number Maximum Nodes Supported End Point ID Group Name Profile 1 5 0 Lifeline 0x0001
Configuration Parameters	Parameter Number Name Description Format Size Min Value Max Value Default Value 1 Siren Strobe Mode 0:All Enable/1:Siren/2:Strobe, default:0 1 1 0 0 0x00 2 Siren Single Count Set 0~10 Siren Single Count, default:0 1 1 0 0 0x00 3 Alarm Auto Stop Time 0:30s/1:60s/2:120s/3:No Stop, default:0 1 1 0 0 0x00 4 Report Retry Count Set 0~5 Report Retry Count, default:0 1 1 0 0 0x00 5 Supervision Timeout Set 500~10000 ms, default:500 1 2 0 0 0x01F4
Texts	ID Description Value 8 Where to find S2 DSK on product The DSK label is located on the back of the sensor. Scan the QR code on the DSK label during device setup. Once powered on, the device will automatically join the network. The DSK label will be on the backside of ZM1601, Scan the DSK label to access the SmartStart if gateway 's UI supports SmartStart. (Remark: The QR code is for use with Z-Wave SmartStart by using “DSK,” “Device Specific Key,” “PIN,” or “PIN code,” etc.) 1 Classic Inclusion To Include (Add) ZM1601 into a Z-Wave® Network: 1. Put your Z-Wave® Controller into inclusion mode. 2. Open the bracket and press the program switch for less than 5 seconds. 3. The LED will blink once after successful inclusion, and it also sends the indicator report. 2 Classic Exclusion To Exclude (Remove) ZM1601 from a Z-Wave® Network: 1. Put your Z-Wave® Controller into exclusion mode. 2. Press the program switch for less than 5 seconds. 3. The LED will blink 5 times after exclusion. 5 Factory Reset Procedure Factory Default Reset: Use a paperclip to access the Reset switch on the back side and wait for 10 seconds after removing the rear cover. The device will send the “Device Reset Locally Notification” command and reset to the factory default.
Supported Notification Types	Notification Type Event / State Home Security (Refer to parameters): State idle Home Security Cover status: Tampering, product cover removed
Supports NWI	Yes
Supports Explorer Frames	Yes
Is Flirs	Yes
Supports SmartStart	Yes