Product Recognition
Certification Number	ZC14-25090547
Name	High Power Relay
Short Description	The High Power Relay is designed for use with large loads up to 40A like pool pumps or electric water heaters.
Description	PRODUCT HIGHLIGHTS: - Z-Wave® on/off control of large loads up to 40A - Great for pool pumps, electric heaters, or boilers - Energy monitoring live and over time - LED indicator for easier troubleshooting - Z-Wave® Long Range for ultra reliable no-mesh communication - NEW 800 series chip for faster performance - Built-in overload protection and SGS certification SPECS: - Model Number: ZEN78 800LR - Z-Wave® Region: US/CA/MX - Power: 120-240 VAC, 60 Hz - Maximum Load: 40 A, 9600 W (resistant load) - Standby power consumption: 1W - Operating Temperature: 32° – 104° F - Range: Up to 300 feet (or up to 1300
Brand	Zooz
Brand Owner	Zooz
Identifier	ZEN78 800LR
Product Line	Smart Relays
OEM Version	HW: 01 FW: 01.01
Hardware Platform	EFR32ZG23A
Z-Wave Version	7.23.2
Library Type	END_NODE_ENHANCED_232
Device Type	Binary Switch DT
Role Type	ROLE_TYPE_END_NODE_ALWAYS_ON
Manufacturer ID	0x027A
Product Type ID	0x0103
Product ID	0x004E
User Icon	0x0700
Installer Icon	0x0700
Radio Range Z-Wave (m)	40
Radio Range Z-Wave LR (m)	400
Frequency Plans	US: 916.00MHz, 908.40MHz, US_LR: 912.00MHz, 920.00MHz
Categories	On/Off Switches/Devices
Countries / Regions	Argentina, Bahamas, Barbados, Bermuda, Bolivia, British Virgin Islands, Canada, Cayman Islands, Colombia, Guatemala, Haiti, Honduras, Jamaica, Mexico, Panama, Saint Kitts and Nevis, Suriname, Trinidad and Tobago, Turks and Caicos Islands, United States of America
Supported Command Classes	Identifier Name Key Version COMMAND_CLASS_ASSOCIATION_V2 Association V2 0x85 2 COMMAND_CLASS_ASSOCIATION_GRP_INFO_V3 Association Group Information (AGI) V3 0x59 3 COMMAND_CLASS_DEVICE_RESET_LOCALLY Device Reset Locally 0x5A 1 COMMAND_CLASS_FIRMWARE_UPDATE_MD_V5 Firmware Update Meta Data V5 0x7A 5 COMMAND_CLASS_INDICATOR_V3 Indicator V3 0x87 3 COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2 Manufacturer Specific V2 0x72 2 COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3 Multi Channel Association V3 0x8E 3 COMMAND_CLASS_VERSION_V3 Version V3 0x86 3 COMMAND_CLASS_ZWAVEPLUS_INFO_V2 Z-Wave Plus Info V2 0x5E 2 COMMAND_CLASS_SECURITY_2 Security 2 0x9F 1 COMMAND_CLASS_SUPERVISION Supervision 0x6C 1 COMMAND_CLASS_TRANSPORT_SERVICE_V2 Transport Service V2 0x55 2 COMMAND_CLASS_POWERLEVEL Powerlevel 0x73 1 COMMAND_CLASS_SWITCH_BINARY_V2 Binary Switch V2 0x25 2 COMMAND_CLASS_BASIC_V2 Basic V2 0x20 2 COMMAND_CLASS_METER_V6 Meter V6 0x32 6 COMMAND_CLASS_APPLICATION_STATUS Application Status 0x22 1 COMMAND_CLASS_CENTRAL_SCENE_V3 Central Scene V3 0x5B 3 COMMAND_CLASS_CONFIGURATION_V4 Configuration V4 0x70 4 COMMAND_CLASS_SENSOR_MULTILEVEL_V11 Multilevel Sensor V11 0x31 11 COMMAND_CLASS_NOTIFICATION_V8 Notification V8 0x71 8 COMMAND_CLASS_CRC_16_ENCAP CRC-16 Encapsulation 0x56 1
S2 Classes	S2_AUTHENTICATED
Documents	Category File Manual_English zooz-z-wave-long-range-high-power-relay-zen78-800lr-manual-settings.pdf
Features	Feature Values Color Value White Firmware Updatable Value Updatable by Consumer by RF Switch Load Capacity Current Value 40
Association Groups	Group Number Maximum Nodes Supported End Point ID Group Name Profile 1 5 0 Lifeline 0x0001 2 5 0 Retransmit 0x0000 3 5 0 Overheat triggered set on 0x7104 4 5 0 Overheat triggered set off 0x7104 5 5 0 Overheat release set on 0x7104 6 5 0 Overheat release set off 0x7104 7 5 0 Under heat triggered set on 0x7104 8 5 0 Under heat triggered set off 0x7104 9 5 0 Under heat release set on 0x7104 10 5 0 Under heat release set off 0x7104 11 5 0 External switch action 0x2001
Configuration Parameters	Parameter Number Name Description Format Size Min Value Max Value Default Value 1 Overload Protection Delay Decide when overload protection kicks in. If power draw exceeds 40.5A for x amount of seconds, the relay will automatically turn off 1 1 0 0 0x02 2 On/Off Status After Power Failure Choose the recovery state for your relay if power outage occurs 2 1 0 0 0x00 3 On/Off Status Reports Choose what type of reports (basic or binary switch) you want the device to send to the hub 2 1 0 0 0x01 4 Watt Report Threshold Choose when the relay will report Watts to your hub. Value 1 = 1 Watt change 1 2 0 0 0x000A 5 Watt Report Frequency Decide how often the relay will report Watt data to the hub (in second intervals) 1 4 0 0 0x0000012C 6 kWh Report Frequency Decide how often the relay will report kWh data to the hub (in second intervals) 1 4 0 0 0x0000012C 7 Volt Report Threshold Choose when the relay will report Volts to your hub. Value 1 = 1 V and value 10 = 10 V change 1 1 0 0 0x0A 8 Volt Report Frequency Decide how often the relay will report Volt data to the hub (in second intervals) 1 4 0 0 0x0000012C 9 Amp Report Threshold Choose when the relay will report Amps to your hub. Value 1 = 0.001A and value 1000 = 1A change 1 2 0 0 0x03E8 10 Amp Report Frequency Decide how often the relay will report Amp data to the hub (in second intervals) 1 4 0 0 0x0000012C 11 Disable Manual Control Disable or enable manual control (turning the relay on and off using the physical button) 2 1 0 0 0x01 17 Auto Turn On After Overload Disable or set the delay for the automatic turn on after the relay was turned off due to overload protection 1 2 0 0 0x0000 23 Heat Alert Level (Celsius) Set the temperature level for a heat alert notification to be sent to your hub and associated devices (this setting is for Celsius units) 1 1 0 0 0x55 24 Freeze Alert Level (Celsius) Set the temperature level for a freeze alert notification to be sent to your hub and associated devices (this setting is for Celsius units) 0 1 0 0 0xF4 25 Heat Alert Notification Decide if and how the temperature sensor should report a heat alert. See manual for details 2 1 0 0 0x02 31 Input Report Type Choose status change reports to be sent from the input (wall switch) to devices associated in Group 11. See manual for details 2 1 0 0 0x00
Texts	ID Description Value 8 Where to find S2 DSK on product The SmartStart QR code and security PIN are located on top of the relay’s cover 1 Classic Inclusion Manual inclusion: initiate inclusion (pairing) in the app or hub UI. Make sure the device is powered and finalize the inclusion at the relay: tap the Z-Wave® button on the device 3 times quickly. 2 Classic Exclusion 1. Bring the High Power Relay within direct range of your Z-Wave® gateway (hub). 2. Put the Z-Wave® hub into exclusion mode (not sure how to do that? ask@getzooz.com). 3. Click the Z-Wave® button 3 times quickly. 4. Your hub will confirm exclusion and the Relay will disappear from your controller's device list. 5 Factory Reset Procedure When your network’s primary controller is missing or otherwise inoperable, you may need to reset the device to factory settings manually. In order to complete the process, power the ZEN78 Relay, then click the Z-Wave® button once and immediately a
Supported / Controlled Meter Types	Meter Type Rate Type Electric meter Import (consumed)
Supported Notification Types	Notification Type Event / State Heat Alarm (Refer to parameters): State idle Heat Alarm Heat sensor status: Overheat detected Heat Alarm Heat sensor status: Under heat detected Power Management (Refer to parameters): State idle Power Management Over-current status: Over-current detected System (Refer to parameters): State idle System HW status: System hardware failure
Supported Multilevel Sensors	Multilevel Sensor Type Air temperature
Supports NWI	Yes
Supports Explorer Frames	Yes
Supports SmartStart	Yes