Qubino Flush 1D relay – Z-Wave Alliance Product Catalog

Back to Listing

Product Recognition

Certification Number

ZC10-15070017

Name

Qubino Flush 1D relay

Short Description

Qubino Flush 1D relay is used for switching On or Off the electrical device. Output contact is voltage free (dry contact), so also loads with different power supply can be connected to the module.

Long Description

Qubino Flush 1D relay with voltage free (dry contact) output contact. This Z-Wave module is used for switching on or off the electrical device (e.g. light, fan, etc ...). The module can be controlled either through Z-wave network or through the wall switch. The module is designed to be mounted inside a “flush mounting box”, hidden behind a traditional wall switch. Module supports connection of digital temperature sensor. It is designed to act as repeater in order to improve range and stability of Z-wave network. Output contact is voltage free (dry contact), so also loads with different power supply can be connected to the module. FEATURES: - The module has the option to connect a digital temperature sensor - small dimensions (WxHxD) 41,8x36,8x15,4mm - power supply is 110 - 230 VAC ±10% 50/60Hz, 24-30VDC - Electrical consumption 0,4W

Brand

QUBINO

Product Identifier

ZMNHN

OEM Version

Hardware Platform

ZM5202

Z-Wave Version

6.51.06

Library Type

SLAVE_ENHANCED_232

Device Type

On/Off Power Switch

Role Type

ROLE_TYPE_SLAVE_ALWAYS_ON

Manufacturer ID

0x0159

Product Type ID

0x0002

Product ID

0x0053

Frequency Plans

EU: 869.85MHz, 868.40MHz

Categories

All Lighting Devices, On/Off Switches/Devices

Countries / Regions

European Union

Documents

Association Groups

Configuration Parameters

Parameter Number

Name

Description

Format

Size

Min Value

Max Value

Default Value

Parameter Values

Input 1 switch type

Defines the type of switch connected to Input 1

From	To	Description
1	1	bi-stable switch type
0	0	mono-stable switch type (push button)

Input 2 contact type

Defines the type of switch connected to Input 2

From	To	Description
0	0	NO (normally open) input type
1	1	1 - NC (normally close) input type

Automatic turning off output after set time

Support automatic turning off output after set time. When relay is ON it goes automatically OFF after time defined by this parameter. Timer is reset to zero each time the module receive ON command regardless from where it comes (push button, associated module, controller,..).

From	To	Description
1	32535	1 – 32535 = 1second (0,01s) – 32535 seconds (325,35s) Auto OFF enabled with define time, step is 1s or 10ms according to parameter nr.15
0	0	Auto OFF disabled

Activate / deactivate functions ALL ON/ALL OFF

Support to activate / deactivate functions ALL ON/ALL OFF Flush 1D relay module responds to commands ALL ON / ALL OFF that may be sent by the main controller or by other controller belonging to the system.

255

From	To	Description
255	255	ALL ON active, ALL OFF active
0	0	ALL ON is not active ALL OFF is not active
1	1	ALL ON is not active ALL OFF active
2	2	ALL ON active ALL OFF is not active

Output Switch selection

Support output Switch selection Set value means the type of the device that is connected to the output. The device type can be normally open (NO) or normally close (NC).

From	To	Description
1	1	When system is turned off the output is 230V or 24V (NO).
0	0	When system is turned off the output is 0V (NC).

100

Enable / Disable Endpoint I2 or select Notification Type and Event

Support Enable / Disable Endpoint I2 or select Notification Type and Event Enabling I2, means that Endpoint (I2) will be present on UI. Disabling it will result in hiding the endpoint according to the parameter set value. Additionally, a Notification Type and Event can be selected for the endpoint. NOTE: After parameter change module has to be reincluded into the network for the setting to take effect!

From	To	Description
0	0	Endpoint, I2 disabled
4	4	Water Alarm; Water Leak detected, unknown location.
6	6	Smoke Alarm; Smoke detected, unknown location.
3	3	Carbon Dioxide; Carbon Dioxide detected, unknown location.
1	1	Home Security; Motion Detection, unknown location
5	5	Heat Alarm; Overheat detected, unknown location.
2	2	Carbon Monoxide; Carbon Monoxide detected, unknown location.

110

Temperature sensor offset settings

Defines temperature sensor offset settings Set value is added or subtracted to actual measured value by sensor.

32536

From	To	Description
1	100	value from 0.1C to 10.0C is added to actual measured temperature.
32536	32536	offset is 0.0C
1001	1100	value from -0.1C to -10.0C is subtracted to actual measured temperature.

120

Digital temperature sensor reporting

Defines the digital temperature sensor reporting If digital temperature sensor is connected, module reports measured temperature on temperature change defined by this parameter.

From	To	Description
0	0	Reporting disabled
1	127	0,1C – 12,7C, step is 0,1C

Texts

Supports NWI

Yes

Supports Explorer Frames

Yes