| Product Recognition | |
|---|
| Certification Number | ZC10-16030002 |
|---|
| Name | Ecolink Garage Door Tilt Sensor |
|---|
| Short Description | The Ecolink Z-Wave Plus Garage Door Tilt Sensor monitors the status of a sectioned garage door to communicate the current status of open or closed. |
|---|
| Long Description | • For indoor use only
• Operating frequency: 908.42 MHz
• Operating range: Up to 100 feet (30.5 meters) line-of-sight
• Operating temperature: 0˚C to 49˚C, 32˚F to 120˚F (ambient temperature)
• Battery type: 3V Lithium CR123A
• Battery life: 5 to 8 years depending upon operating conditions |
|---|
| Brand | Ecolink Intelligent Technology |
|---|
| Product Identifier | TILTZWAVE2.5-ECO |
|---|
| OEM Version | 2 |
|---|
| Hardware Platform | ZM5202 |
|---|
| Z-Wave Version | 6.51.06 |
|---|
| Library Type | SLAVE_ROUTING |
|---|
| Device Type | Notification Sensor |
|---|
| Role Type | ROLE_TYPE_SLAVE_SLEEPING_REPORTING |
|---|
| Manufacturer ID | 0x014A |
|---|
| Product Type ID | 0x0004 |
|---|
| Product ID | 0x0003 |
|---|
| Frequency Plans | US: 916.00MHz, 908.40MHz |
|---|
| Categories | Sensors |
|---|
| Countries / Regions | United States of America |
|---|
| Controlled Command Classes | | Identifier | Name | Key | Version |
|---|
| COMMAND_CLASS_BASIC | Basic | 0x20 | 1 |
|
|---|
| Documents | |
|---|
| Association Groups | | Group Number | Maximum Nodes Supported | End Point ID | Description |
|---|
| 2 | 5 | 0 | Created to communicate directly to other local Z-Wave devices. | | 1 | 5 | 0 | Z-Wave Plus Lifeline |
|
|---|
| Texts | | ID | Description | Value |
|---|
| 1 | Inclusion | Once the controller is in inclusion mode, remove the battery pull tab OR insert the battery to power up the sensor. | | 2 | Exclusion | Once the controller is in exclusion mode, remove the battery pull tab OR insert the battery into the sensor to initiate power up. | | 5 | Factory Reset | To reset the sensor to factory default, place the controller in exclusion mode and then insert the battery into the sensor to initiate power up. Use this procedure only in the event that the network primary controller is missing or otherwise inoperable. | | 4 | Device Wake-Up | Simply remove the sensor cover to wake up for configuration. |
|
|---|
| Supports NWI | Yes |
|---|
| Supports Explorer Frames | Yes |
|---|
