Product Recognition
Certification Number	ZC10-15100010
Name	Qubino Flush 2 relays
Short Description	Module is used for switching on or off two electrical devices and measure power consumtion.
Long Description	Flush 2 relays module is used for switching on or off two electrical devices (e.g. lights, fans, etc ...). The module can be controlled either through Z-Wave network or through the wall switches. The module is designed to be mounted inside a “flush mounting box”, hidden behind a traditional wall switch. Module measures power consumption of two electrical devices and supports connection of digital temperature sensor. It is designed to act as repeater in order to improve range and stability of Z-wave network.
Brand	QUBINO
Product Identifier	ZMNHB
OEM Version	App: 5.0
Hardware Platform	ZM5202
Z-Wave Version	6.51.06
Library Type	SLAVE_ENHANCED_232
Device Type	On/Off Power Switch
Role Type	ROLE_TYPE_SLAVE_ALWAYS_ON
Manufacturer ID	0x0159
Product Type ID	0x0002
Product ID	0x0051
Frequency Plans	EU: 869.85MHz, 868.40MHz
Categories	All Lighting Devices, On/Off Switches/Devices
Countries / Regions	European Union
Documents	Category Description File Manual_Primary_Lang Product or Owner's Manual Qubino_Flush 2 Relay PLUS extended manual_eng_2.2.pdf
Association Groups	Group Number Maximum Nodes Supported End Point ID Description 1 1 0 Lifeline group (reserved for communication with the main controller), 1 node allowed.
Configuration Parameters	Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 2 Input 2 switch type Input 2 switch type 0 1 0 0 1 From To Description 0 0 mono-stable switch type (push button) 1 1 bi-stable switch type 43 Power reporting in Watts by time interval for Q2 Set value means time interval (0 – 32535) in seconds, when power report is send. 0 2 0 0 300 From To Description 0 0 Reporting Disabled 1 32535 = 1 second – 32535 seconds. Reporting enabled, Power report is send with time interval set by entered value. 63 Output Q1 Switch selection Set value means the type of the device that is connected to the Q1 output. The device type can be normally open (NO) or normally close (NC). 0 1 0 0 0 From To Description 0 0 When system is turned off the output is 0V (NC). 1 1 When system is turned off the output is 230V (NO). 42 Power reporting in Watts by time interval for Q1 Set value means time interval (0 – 32535) in seconds, when power report is send. 0 2 0 0 300 From To Description 0 0 Reporting Disabled 1 32535 = 1 second – 32535 seconds. Reporting enabled, Power report is send with time interval set by entered value. 120 Digital temperature sensor reporting If digital temperature sensor is connected, module reports measured temperature on temperature change defined by this parameter. 0 1 0 0 5 From To Description 0 0 Reporting disabled 1 127 0,1 deg.C - 12.7 deg.C. - step is 0,1 deg.C 40 Power reporting in Watts on power change for Q1 Set value means percentage, set value from 0 – 100 = 0% - 100%. 0 1 0 0 10 From To Description 0 0 Reporting Disabled 1 100 1% - 100% Reporting enabled. Power report is send (push) only when actual power in Watts in real time changes for more than set percentage comparing to previous actual power in Watts, step is 1%. NOTE: if power changed is less than 1W, the report is not send (pushed), independent of percentage set. 41 Power reporting in Watts on power change for Q2 Set value means percentage, set value from 0 – 100 = 0% - 100% 0 1 0 0 10 From To Description 0 0 Reporting Disabled 1 100 1% - 100% Reporting enabled. Power report is send (push) only when actual power in Watts in real time changes for more than set percentage comparing to previous actual power in Watts, step is 1%. NOTE: if power changed is less than 1W, the report is not send (pushed), independent of percentage set. 64 Output Q2 Switch selection Set value means the type of the device that is connected to the Q2 output. The device type can be normally open (NO) or normally close (NC). 0 1 0 0 0 From To Description 0 0 When system is turned off the output is 0V (NC). 1 1 When system is turned off the output is 230V (NO). 110 Temperature sensor offset settings Set value is added or subtracted to actual measured value by sensor. 0 2 0 0 32536 From To Description 32536 32536 offset is 0.0 deg.C 1 100 value from 0.1 deg.C to 10.0 deg.C is added to actual measured temperature. 1001 1100 value from -0.1 deg.C to -10.0 deg.C is subtracted to actual measured temperature. 1 Input 1 switch type Input 1 switch type 0 1 0 0 1 From To Description 1 1 bi-stable switch type 0 0 mono-stable switch type (push button) 11 Automatic turning off output Q1 after set time When relay Q1 is ON it goes automatically OFF after time defined by this parameter. Timer is reset to zero each time the module receive ON command regardless from where it comes (push button, associated module, controller,..). 0 2 0 0 0 From To Description 0 0 Auto OFF disabled 1 32535 1second (0,01s) – 32535 seconds (325,35s) Auto OFF enabled with define time, step is 1s or 10ms according to parameter nr.15 10 Activate / deactivate functions ALL ON/ALL OFF Activate / deactivate functions ALL ON/ALL OFF Flush 2 relays module responds to commands ALL ON / ALL OFF that may be sent by the main controller or by other controller belonging to the system. 0 2 0 0 255 From To Description 255 255 ALL ON active, ALL OFF active 0 0 ALL ON is not active ALL OFF is not active 1 1 ALL ON is not active ALL OFF active 2 2 ALL ON active ALL OFF is not active
Texts	ID Description Value 1 Inclusion Module Inclusion (Adding to Z-Wave network) • Connect module to power supply (with temperature sensor connected - if purchased), • enable add/remove mode on main controller • auto-inclusion (works for about 5 seconds after connected to power supply) or • press service button S for more than 2 second or • press push button I1 three times within 3s (3 times change switch state within 3 seconds). NOTE1: For auto-inclusion procedure, first set main controller into inclusion mode and then connect module to power supply. NOTE2: When connecting temperature sensor to module that has already been included, you have to exclude module first. Switch off power supply , connect the sensor and re-include the module. 2 Exclusion Module Exclusion/Reset (Removing from Z-Wave network) • Connect module to power supply • bring module within maximum 1 meter (3feet) of the main controller, • enable add/remove mode on main controller, • press service button S for more than 6 second or • press push button I1 five times within 3s ( 5 times change switch state within 3 seconds) in the first 60 seconds after the module is connected to the power supply. By this function all parameters of the module are set to default values and own ID is deleted. If service button S is pressed more than 2 and less than 6second module is excluded, but configuration parameters are not set to default values 5 Factory Reset Please use this procedure only in the event that your network primary controller is missing or otherwise inoperable. If the service button S is pressed for mor ethan 6 seconds the module will be reset to the factory defoult state 6 Additional Special Features - The module has the option to connect a digital temperature sensor - small dimensions (WxHxD) 41,8x36,8x15,4mm - power supply is 110 - 230 VAC ±10% 50/60Hz, 24-30VDC - Electricity consumption 0,4W
Supports NWI	Yes
Supports Explorer Frames	Yes