Product Recognition
Certification Number	ZC10-16055087
Name	HS-WD100+ Wall Dimmer
Short Description	HS-WD100+ Wall Dimmer Switch is Z-Wave Plus certified and offers wireless on-off-dim control of most dimmable bulbs.
Long Description	• Supports wireless on-off-dim control of dimmable lighting loads • Z-Wave Plus certified for easy inclusion and reliable communications • Compatible with HomeSeer (and many other) home controllers • Includes double-tap, triple-tap, press & hold event features* to trigger up to 6 different home automation events • Supports Z-Wave central scene technology • Supports instant status when controlled locally* • Easy 'screw terminal' installation
Brand	HomeSeer
Product Identifier	HS-WD100+
OEM Version	HW: 255 FW: 5.13
Hardware Platform	ZM5202
Z-Wave Version	6.51.06
Library Type	SLAVE_ENHANCED_232
Device Type	Light Dimmer Switch
Role Type	ROLE_TYPE_SLAVE_ALWAYS_ON
Manufacturer ID	0x000C
Product Type ID	0x4447
Product ID	0x3034
User Icon	0x0600
Installer Icon	0x0600
Frequency Plans	US: 916.00MHz, 908.40MHz
Categories	All Lighting Devices, Dimming Lighting Devices
Countries / Regions	United States of America
Controlled Command Classes	Identifier Name Key Version COMMAND_CLASS_CENTRAL_SCENE_V2 Central Scene V2 0x5B 2
Documents	Category Description File Manual_Primary_Lang Product or Owner's Manual HS-WD100-Manual-v1_1a.pdf
Association Groups	Group Number Maximum Nodes Supported End Point ID Description 1 5 0 Z-Wave Plus Lifeline
Configuration Parameters	Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 9 indicates the number of levels The time interval of brightness change between dimming up and down can be adjusted Length: 1 Byte Valid Values: 1-99 (default = 1), indicates the number of levels the lighting will change when the timer runs out. 0 1 0 0 1 From To Description 1 99 indicates the number of levels the lighting will change when the timer runs out. 4 the orientation of the ON/OFF on the rocker switch the orientation of the ON/OFF on the rocker switch can be inverted 0 1 0 0 0 From To Description 0 0 the connected light will turn ON by pressing the top side of the rocker switch and turn OFF by pressing the bottom side. 1 1 the connected light will turn OFF by pressing the top side of the rocker switch and turn ON by pressing the bottom side.
Texts	ID Description Value 1 Inclusion 1. Turn the connected lights ON/OFF by tapping the switch. Tapping and releasing the upper part of the rocker turns the appliance ON. Tapping and releasing the lower part of the rocker turns the appliance OFF. 2. Add(Include) the module to/from your Z-Wave network with your primary controller. Please refer to the instructions manual of your gateway or remote controller for details and procedures on how these actions can be done. 3. Normally, the sequence is as follows: when the inclusion process is prompted by your primary controller, single click and release the rocker switch to ON or OFF position. The controller should show that the action was successful. If the controller shows it was a fail, repeat the procedure. 2 Exclusion 1. Turn the connected appliance ON/OFF by tapping the switch. Tapping and releasing the upper part of the rocker turns the appliance ON. Tapping and releasing the lower part of the rocker turns the appliance OFF. 2. Delete(Exclude) the module to/from your Z-Wave network with your primary controller. Please refer to the instructions manual of your gateway or remote controller for details and procedures on how these actions can be done. 3. Normally, the sequence is as follows: when the exclusion process is prompted by your primary controller, single click and release the rocker switch. The controller should show that the action was successful. If the controller shows it was a fail, repeat the procedure. 5 Factory Reset Please use this procedure only in the event that the network primary controller is lost or otherwise inoperable. All Configuration Parameters can all be restored to their factory default settings by using your primary controller to delete/reset the device. To manually reset, tap the ON button twice quickly and then tap the OFF button twice quickly. Repeat the procedure to restore the settings to the factory default. 6 Additional Special Features Z-Wave Plus introduces a new process for scene activation – “Central Scene Control”. Press and release the button, it will send a certain command to the central controller via the lifeline association group 1. This allows the controller to react to key pressed, key released and key held down. - Press and release the top button, “Scene 001 Key Pressed” preset by the Gateway will be turned ON. - Press the top button twice, “Scene 001 Key Pressed Twice” preset by the Gateway will be turned ON. - Press the top button 3 times, “Scene 001 Key Pressed 3 Times” preset by the Gateway will be turned ON. - Press and release the bottom button, “Scene 002 Key Pressed” preset by the Gateway will be turned ON. - Press the bottom button twice, “Scene 002 Key Pressed Twice” preset by the Gateway will be turned ON. - Press the bottom button 3 times, “Scene 002 Key Pressed 3 Times” preset by the Gateway will be turned ON.
Supports NWI	Yes
Supports Explorer Frames	Yes