Product Recognition
Certification Number	ZC10-16055081
Name	Cellular Shade Radio Z-Wave
Short Description	Automated custom window treatment for simplified, convenient lighting control featuring Z-Wave controlled motorized lift.
Long Description	Enjoy the comfort, convenience and energy efficiency of beautiful custom motorized window treatments featuring Z-Wave protocol for easy integration. Lighting control has never been more simple. Window treatments can be automated using your favorite Z-Wave certified gateway or security system, or controlled by a remote control. Raise or lower the shades to control just the right amount of light, privacy and solar heat. Shades can be fully open, fully closed or anywhere in between, it’s up to you. In addition, some systems will also report back the state of the battery charge on battery operated versions.
Brand	Graber
Product Identifier	CSZ1
OEM Version	HW: 255 FW: 187.65:1.09
Hardware Platform	ZM5202
Z-Wave Version	6.61.00
Library Type	SLAVE_ENHANCED_232
Device Type	Window Covering - Pos/End Aware
Role Type	ROLE_TYPE_SLAVE_SLEEPING_LISTENING
Manufacturer ID	0x026E
Product Type ID	0x4353
Product ID	0x5A31
User Icon	0x1A00
Installer Icon	0x1A00
Frequency Plans	US: 916.00MHz, 908.40MHz
Categories	Window Covering
Countries / Regions	United States of America
Documents	Category Description File Manual_Primary_Lang Product or Owner's Manual Graber Virtual Cord Owner's Manual 0002.pdf
Features	Feature Values Battery Type Value AA Lithium Color Value White Firmware Updatable Value Updatable by Manufacturer Switch Load Capacity Current Value 800 Switch Type Value Push Button with Indicator Window Covering Control Features Value Endpoint Aware Battery Quantity Value 8
Association Groups	Group Number Maximum Nodes Supported End Point ID Description 1 1 0 Lifeline (primary controller) SWITCH MULTILEVEL REPORT after movement BATTERY STATUS after movement or critical status DEVICE RESET LOCALLY
Texts	ID Description Value 1 Inclusion 1. Put Primary Controller into Inclusion Mode 2. Press and Hold Shade Programming Button for >2seconds 2 Exclusion 1. Put Primary Controller into Exclusion Mode 2. Press and Hold Shade Programming Button for >2seconds 5 Factory Reset Please use this procedure only when the network primary controller is missing or otherwise inoperable Press and hold the button on the shade for approximately 15 seconds (the LED will stop flashing when complete) 4 Device Wake-Up The Wakeup command class should be configured by a hub when the remote is joined to a Z-Wave network. A WAKE_UP_INTERVAL_SET command should configure the NodeID at a minimum. The Wakeup interval can be configured to any value from 6 minutes to 25 hours. Recommendation is to leave the interval at the default of 12 hours to maximize battery life. The remote will wake up every WakeUpInterval and send a WakeUp Notification command as well as a battery report to the NodeID assigned with the Interval Set command. The WakeUp Notification will be sent within a few minutes of power being applied to the remote and then once every Wake Up Interval. A Wakeup Interval Capabilities command will inform the hub of the default, minimum, maximum and step size of the Wake Up interval.
Supports NWI	Yes
Supports Explorer Frames	Yes
Is Flirs	Yes