Product Recognition
Certification Number	ZC10-16065124
Name	Smart Plug
Short Description	Smart Plug is a Z-Wave Switch plugin module specifically used to enable Z-Wave command and control (on/off) of any plug-in tool. It can report wattage consumption or kWh energy usage.
Long Description	Smart Plug is a Z-Wave Switch plugin module specifically used to enable Z-Wave command and control (on/off) of any plug-in tool. It can report wattage consumption or kWh energy usage.Smart Plug is also a security Z-Wave device and supports the Over The Air (OTA) feature for the product’s firmware upgrade.
Brand	Hank
Product Identifier	HKZW-SO01
OEM Version	HW: 1 FW: 1.03
Hardware Platform	ZM5202
Z-Wave Version	6.51.07
Library Type	SLAVE_ENHANCED_232
Device Type	On/Off Power Switch
Role Type	ROLE_TYPE_SLAVE_ALWAYS_ON
Manufacturer ID	0x0208
Product Type ID	0x0101
Product ID	0x0005
User Icon	0x0700
Installer Icon	0x0700
Frequency Plans	US: 916.00MHz, 908.40MHz
Categories	Energy Meters, All Lighting Devices, On/Off Switches/Devices
Countries / Regions	United States of America
Documents	Category Description File Manual_Primary_Lang Product or Owner's Manual HKZW-SO01_manual.pdf
Features	Feature Values Firmware Updatable Value Updatable by Consumer by RF Switch Load Capacity Current Value 15A
Association Groups	Group Number Maximum Nodes Supported End Point ID Description 1 5 0 Group 1 is assigned to the Lifeline association group and every device has 5 nodes to associate. When the switch is turned on or off , the switch will send a basic report of its status to the nodes in association group 1. To change what kind of signal is sent to the nodes in group 1, please see the detailed description of configuration parameter 24.
Configuration Parameters	Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 151 Threshold of change in wattage The value here represents minimum change in wattage (in terms of wattage) for sending a METER REPORT (for wattage) to the associated device (Group Lifeline). 0 2 0 0 50 From To Description 0 0 The function is disabled 1 65535 The minimum change value in wattage for sending a meter report to the associated device 152 Threshold of change in wattage percentage The value here represents minimum change in wattage percent (in terms of percentage) for sending a METER REPORT (for wattage) to the associated device (Group Lifeline). 0 1 0 0 10 From To Description 0 0 The function is disabled. 1 255 The minimum change value in wattage percent for sending a meter report to the associated device 172 Intervals of sending METER REPORT (for kWh) The time interval of sending Meter Report (for kWh) to the associated device (Group Lifeline). 0 4 0 0 300 From To Description 5 2678400 The time for sending a meter report 0 0 The function is disabled. 173 Intervals of sending METER REPORT (for voltage). The time interval of sending Meter Report (for voltage) to the associated device (Group Lifeline). 0 4 0 0 0 From To Description 5 2678400 The time for sending a meter report 0 0 The function is disabled 174 Intervals of sending METER REPORT (for current). The time interval of sending Meter Report (for voltage) to the associated device (Group Lifeline). 0 4 0 0 0 From To Description 0 0 The function is disabled 5 2678400 The time for sending a meter report 24 Notification when Load status changed Smart Plug can send notifications to association device (Group Lifeline) when state of smart plug’s load changed. 0 1 0 0 1 From To Description 0 0 The function is disabled. 1 1 Send BASIC REPORT 2 2 Send BASIC REPORT only when Load condition is changed not by Z-WAVE Command, such as short pressing.
Texts	ID Description Value 1 Inclusion Set the Z-Wave network main controller into learning mode. Short press the Z-button, the LED will keep turning on or off, which indicates the inclusion is successful. 2 Exclusion Set the Z-Wave network main controller into remove mode. Triple click the Z-button, the LED will blink slowly, which indicates the inclusion is successful. 5 Factory Reset Press and hold the Z-button for more than 20 seconds, the LED will blink faster and faster when the button is pressed. If holding time more than 20seconds, the LED indicator will be on for 3 seconds then it blinking slowly, which indicates the reseting is successful. Use this procedure only in the event that the network primary controller is missing or otherwise inoperable.
Supports NWI	Yes
Supports Explorer Frames	Yes