Product Recognition
Certification Number	ZC10-16065094
Name	Z-Wave Power Strip
Short Description	This five-outlet power strip is equipped with two USB charging ports (5V/2.1A). Include the device to your Z-Wave network and control small appliances and lamps remotely.
Long Description	Product features: - Scene inclusion for custom automation scenarios when included to a Z-Wave gateway controller - Z-Wave Plus with improved 500 chip for faster and safer wireless communication - Signal repeater for a stronger, more reliable network - 2 USB charging ports for your smart phone or tablet (no Z-Wave functionality) - Built-in overload protection Specifications: Z-Wave Signal Frequency: 908.42 MHz Power: 110V Maximum Load: 15Amps TOTAL between 5 outlets USB Charging Port Power: 5V 1A each Cord Length: 3 ft Range: Up to 100 feet line of sight Installation and Use: Indoor only
Brand	Zooz
Product Identifier	ZEN20
OEM Version	HW: 1 FW: 20.15
Hardware Platform	ZM5202
Z-Wave Version	6.51.06
Library Type	SLAVE_ROUTING
Device Type	Power Strip
Role Type	ROLE_TYPE_SLAVE_ALWAYS_ON
Manufacturer ID	0x015D
Product Type ID	0x0621
Product ID	0xF51C
User Icon	0x0800
Installer Icon	0x0800
Frequency Plans	US: 916.00MHz, 908.40MHz
Categories	All Lighting Devices, On/Off Switches/Devices
Countries / Regions	United States of America
Documents	Category Description File Manual_Primary_Lang Product or Owner's Manual Zooz-Z-Wave-Power-Strip-Zen20-Manual.pdf
Features	Feature Values Switch Load Capacity Watts Value 1800W Loads Controlled Value 4 Color Value White Electric Load Type Value Incandescent LED Dimmable LED Inductive (e.g. Motor) Switch Load Capacity Current Value 15A
Association Groups	Group Number Maximum Nodes Supported End Point ID Description 1 5 0 Z-Wave Plus Lifeline
Texts	ID Description Value 2 Exclusion 1. Plug the power strip into a grounded receptacle located within 3 feet from your Z-Wave gateway controller 2. Put your Z-Wave controller in exclusion mode 3. Press and release the power button on the strip 4. The device should disappear from your controller's device list 1 Inclusion 1. Plug the power strip into a grounded receptacle located within 3 feet from your Z-Wave gateway controller 2. Put your Z-Wave controller in inclusion mode 3. Press and release the power button on the strip 4. A new on / off device should appear on your controller's device list 5 Factory Reset When your network’s primary controller is missing or otherwise inoperable, you may need to reset the device to factory settings manually. In order to complete the process, plug the power strip into a grounded receptacle, then PRESS AND HOLD the power button for AT LEAST 3 SECONDS. NOTE: All previously recorded activity and custom settings will be erased from the device’s memory.
Supports NWI	Yes
Supports Explorer Frames	Yes