Product Recognition
Certification Number	ZC10-16095211
Name	Dome Mouser
Short Description	Dome Mouser Smart Electronic Mouse Trap- Clean, Safe & Humane Solution To Rodent Problems
Long Description	The Dome™ Home Automation DMMZ1 Mouser is a powerful rodent electric trap with Z-Wave technology built-in. It kills mice, rats and other rodents quickly, cleanly and humanely with a powerful jolt of electricity. Simply set bait, turn on and place in desired location. When connected to Z-Wave Certified Hub, once the trap is full, it sends out a notification to your smarthome system. You can easily dispose of Mouser’s contents without ever having to touch them. Use the top handle and tip to dispose of caught rodents. Specially designed removable and washable bait tray will allow you to easily replace the bait and set it back up. It operates on 4 AA batteries (not included) and is optimised to last over 50 uses. Mouser features extra-long Z-Wave wireless range (up to 150 ft) and Dome™ DMMZ1 Mouser comes with a 1-year limited warranty. Measurements in inches: 8.75 x 4.5 x 5. Dome™ Home Automation Z-Wave devices give your family peace of mind and security you can count on. With Dome™, you’re always connected and always covered. • Humanely kills mice, rats and other rodents with a powerful electric shock and sends an alert to your smarthome system when the trap needs to be emptied • Easy to use: set bait, turn on and place in desired location Touch free: hold handle and tip to dispose of contents, then set it again • Up to 150-foot Z-Wave range. Operating Temperature: 32°F - 112°F. Powered by 4 AA batteries (not included) enabling it to be triggered over 50 times • Z-Wave Plus Certified. Works as a stand alone electronic mouse trap but requires a Z-Wave Certified Hub for notification functionality • Tested to work with SmartThings, Vera, Staples Connect, HomeSeer, Nexia, Piper, URC, Harmony. Not supported by Wink, DSC, ADT Pulse, 2Gig, Napco, Interlogix, Honeywell (Dome is not associated with listed brands)
Brand	Dome
Product Identifier	DMMZ1
OEM Version	HW: 82 FW: 3.16
Hardware Platform	ZM5202
Z-Wave Version	6.51.06
Library Type	SLAVE_ROUTING
Device Type	Notification Sensor
Role Type	ROLE_TYPE_SLAVE_SLEEPING_REPORTING
Manufacturer ID	0x021F
Product Type ID	0x0003
Product ID	0x0086
User Icon	0x0C07
Installer Icon	0x0C07
Frequency Plans	US: 916.00MHz, 908.40MHz
Categories	Sensors
Countries / Regions	United States of America
Controlled Command Classes	Identifier Name Key Version COMMAND_CLASS_BASIC Basic 0x20 1
Documents	Category Description File Manual_Primary_Lang Product or Owner's Manual Mouser API Manual.pdf
Features	Feature Values Battery Quantity Value 4 Battery Type Value 1.5V AA Size Color Value Dark Gray
Association Groups	Group Number Maximum Nodes Supported End Point ID Description 1 5 0 Group 1 is the “Lifeline” group, which can hold five members, typically including the main Z-Wave controller. The Door/Window Sensor sends this group a Notification Report and a Binary Sensor Report when it is tripped, reset, armed, and disarmed. It also sends this group a Battery Report in reponse to Battery Get commands. 2 5 0 The Mouser sends a Basic Set command to Association Group 2 (or the Control Group) to directly trigger devices (like a light, chime, etc.) when it is tripped. After the trap is reset, a BASIC_SET(00) command is sent to reset the device (e.g. turn off the light.) The value of the Basic Set command (e.g. brightness of the lamp) is configured using configuration parameter 1. 3 5 0 Group 3 supports up to 5 members and the Mouser sends it a NOTIFICATION_REPORT when tripped, reset, armed, and disarmed. 4 5 0 Group 4 supports up to 5 members and the Mouser sends it a SENSOR_BINARY_REPORT when tripped, reset, armed, and disarmed.
Configuration Parameters	Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 1 BASIC_SET Level This parameter sets the value sent by the BASIC_SET command to Association Group 2 (for more information, see “Assocation Groups”.) 0 1 0 0 255 From To Description 0 0 Turn Off Device 1 99 Dim Level 255 255 Turn On Device 2 Set Firing Mode This parameter sets “firing mode” of the Mouser. Two firing modes are available: in the first (Continuous Fire,) electricity is passed continuously for four minutes, and in the second (Burst Fire,) electricity is passed continuously only for the first minute and it is pulsed at approximately 400 beats per minute for the remainder of the time. 0 1 0 0 2 From To Description 1 1 Continuous Fire 2 2 Burst Fire 3 This parameter defines how long the Mouser will fire continuously before it starts to burst-fire (see parameter 2.) This parameter defines how long the Mouser will fire continuously before it starts to burst-fire (see parameter 2.) 0 2 0 0 100 From To Description 100 360 in Seconds 4 Enable/Disable LED Alarm This parameter enables or disables the indicator LED alarm when the trap is tripped. 0 1 0 0 1 From To Description 0 0 LED Alarm Disabled 1 1 LED Alarm Enabled 5 LED Alarm Duration This parameter sets the amount of time the LED Indicator blinks after the trap is tripped. 0 1 0 0 0 From To Description 0 0 LED Blinks Until Trap is Reset 1 255 in Hours
Texts	ID Description Value 1 Inclusion Follow the instructions for your Z-Wave Certified controller to enter inclusion mode. When prompted by the controller: 1. Bring the Mouser to within 10’ of your Z-Wave controller for the inclusion process. After successful pairing, the device can be brought to the desired location. 2. Remove top cover by sliding it back and lifting up. 3. Insert batteries. 4. Press the CONNECT BUTTON quickly 3 times in a row. 5. The LED INDICATOR will flash five times indicating inclusion 2 Exclusion Follow the instructions for your Z-Wave Certified controller to enter exclusion mode. When prompted by the controller: 1. Remove top cover by sliding it back and lifting up. 2. Press the CONNECT BUTTON quickly 3 times in a row. The LED INDICATOR will flash five times indicating exclusion/disconnection. 4 Device Wake-Up If needed, the Mouser can be reset locally by following these steps. Only do this when your Z-Wave controller is disconnected or otherwise unreachable. Beware that resetting your device will disconnect it from the system: 1. Remove the TOP COVER and confirm that your Mouser is powered up. 2. Press and hold the CONNECT BUTTON for at least 10 seconds then release. A flashing LED INDICATOR indicates a successful factory reset. 3. The Mouser’s memory will be erased to factory settings. 5 Factory Reset If needed, the Mouser can be reset locally by following these steps. Only do this when your Z-Wave controller is disconnected or otherwise unreachable. Beware that resetting your device will disconnect it from the system: 1. Remove the TOP COVER and confirm that your Mouser is powered up. 2. Press and hold the CONNECT BUTTON for at least 10 seconds then release. A flashing LED INDICATOR indicates a successful factory reset. 3. The Mouser’s memory will be erased to factory settings.
Supports NWI	Yes
Supports Explorer Frames	Yes