Product Recognition
Certification Number	ZC10-16115307
Name	Zooz Z-Wave Plus On/Off Toggle Switch
Short Description	Use the ZEN23 on/off toggle switch instead of your existing light switch to add wireless control of lights or small appliances.
Long Description	FEATURES - Manual or remote on/off control from your mobile device or computer (when included to a Z-Wave gateway controller) - Z-Wave Plus with improved 500 chip for faster and safer wireless communication - Works with LED, CFL, and incandescent bulbs (minimum 15Watts on load required) - Based on simple and universal binary switch command class - supported by most Z-Wave controllers - May be associated and grouped with other Z-Wave devices for advanced home automation - Built-in Z-Wave signal repeater for a stronger and more reliable network SPECIFICATIONS Model Number: ZEN23 Z-Wave Signal Frequency: 908.42 MHz Power: 120 VAC, 60 Hz Maximum Loads: 960W Incandescent, 1800W (15A) Resistive, ½ HP Motor Minimum Load: 15W for LED and CFL bulbs Range: Up to 100 feet line of sight Operating Temperature: 32-104° F (0-40° C) Installation and Use: Indoor only
Brand	Zooz
Product Identifier	ZEN23
OEM Version	HW: 1 FW: 20.16
Hardware Platform	ZM5202
Z-Wave Version	6.51.07
Library Type	SLAVE_ROUTING
Device Type	On/Off Power Switch
Role Type	ROLE_TYPE_SLAVE_ALWAYS_ON
Manufacturer ID	0x015D
Product Type ID	0x0112
Product ID	0x251C
User Icon	0x0700
Installer Icon	0x0702
Frequency Plans	US: 916.00MHz, 908.40MHz
Categories	All Lighting Devices, On/Off Switches/Devices
Countries / Regions	United States of America
Supported Command Classes	Identifier Name Key Version COMMAND_CLASS_POWERLEVEL Powerlevel 0x73 1 COMMAND_CLASS_SWITCH_ALL Switch All 0x27 1 COMMAND_CLASS_SWITCH_BINARY Switch Binary 0x25 1 COMMAND_CLASS_BASIC Basic 0x20 1 COMMAND_CLASS_VERSION_V2 Version V2 0x86 2 COMMAND_CLASS_DEVICE_RESET_LOCALLY Device Reset Locally 0x5A 1 COMMAND_CLASS_ZWAVEPLUS_INFO_V2 Z-Wave Plus Info V2 0x5E 2 COMMAND_CLASS_ASSOCIATION_V2 Association V2 0x85 2 COMMAND_CLASS_ASSOCIATION_GRP_INFO Association Group Info 0x59 1 COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2 Manufacturer Specific V2 0x72 2
Documents	Category Description File Manual_Primary_Lang Product or Owner's Manual zooz-z-wave-plus-on-off-toggle-switch-zen23-manual.pdf
Features	Feature Values Switch Load Capacity Current Value 15 Amps Color Value White Electric Load Type Value Incandescent Fluorescent LED Neutral Wire Required Switch Type Value Toggle Switch Load Capacity Watts Value 960 Watts (incandescent), 1800 Watts (resistive)
Association Groups	Group Number Maximum Nodes Supported End Point ID Description 1 5 0 Z-Wave Plus Lifeline
Configuration Parameters	Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 1 Toggle Control Use it to change between 2 control modes. Mode 1 will turn the light on when you toggle the switch up, and turn it off when you toggle the switch down. Mode 2 will turn the light on when you toggle the switch down, and turn it off when you toggle the switch up. 0 1 0 0 0 From To Description 0 0 Mode 1 (up for on, down for off) 1 1 Mode 2 (down for on, up for off)
Texts	ID Description Value 2 Exclusion 1. Bring your Z-Wave gateway hub or controller within direct range of the switch 2. Put your Z-Wave controller in exclusion mode 3. Toggle the switch up and down quickly 3 times to complete the exclusion process 4. The device should disappear from your controller's device list Please repeat the process following all steps carefully if the first attempt is unsuccessful 1 Inclusion 1. Bring your Z-Wave gateway hub or controller within direct range of the switch 2. Put your Z-Wave controller in inclusion mode 3. Toggle the switch up and down quickly 3 times to finalize the inclusion process 4. A new on/off device should appear on your controller's device list Troubleshooting Tips: If you are unable to include the Toggle Switch to your controller, please try one of the following: - Bring the controller closer to your Z-Wave switch or use a hand-held secondary controller for inclusion - Toggle your Z-Wave switch quicker 4 or 5 times once you put the controller in the inclusion mode to ensure the command has gone through - Put your controller in the EXCLUSION mode and toggle the switch quickly 3 times, then try adding it to your network again 5 Factory Reset The Toggle Switch will be reset to factory defaults only by exclusion using a Z-Wave controller. You may use any certified Z-Wave controller to exclude and reset the switch. This device may not be reset manually when the network’s primary controller is missing or otherwise inoperable. NOTE: All previously recorded activity and custom settings will be erased from the device’s memory.
Supports NWI	Yes
Supports Explorer Frames	Yes