Product Recognition | |
|---|
Certification Number | ZC10-17015372 |
|---|
Name | Dome Z-Wave Plus Siren |
|---|
Short Description | Dome™ Wireless Z-Wave Plus Siren, Battery Powered with Ten Selectable Tones and Volume Level
• Loud alarm sound (up to 105dB) with flashing LED’s when triggered.
• Additional audible chime notification (i.e. door opens, door bell, warnings). Choose from ten unique sounds and three volume levels (advanced settings subject to Z-Wave Hub compatibility).
• Mounts anywhere- it’s wireless and 100% battery powered with 3-year battery life (2 CR123A Batteries Included). Up to 150-foot range
• Z-Wave Plus Certified. Requires a Z-Wave Certified Hub to operate
• Tested to work with SmartThings, Vera, Staples Connect, HomeSeer, Nexia, Piper, URC, Harmony. Not supported by Wink, DSC, ADT Pulse, 2Gig, Napco, Interlogix, Honeywell (Dome is not associated with listed brands) |
|---|
Long Description | The Dome™ Home Automation DMS01 Siren offers ten user selectable sounds with three volume levels (at up to 105dB) and adjustable siren timeout (30/60/300 seconds or infinite). It includes a functionality of an alarm siren, doorbell and an audible chime notification when door/window opens (advanced settings subject to Z-Wave Hub compatibility). Additional visual notification is provided by built-in flashing LED’s when triggered. One of a kind device on the market with 100% battery operation allowing for easy installation anywhere in your home. There is a 3-year battery life, so you can always be confident that your siren has power. Extra-long Z-Wave wireless range (up to 150 ft) allows you to place it where it’s needed without worrying if the signal is reaching your Z-Wave Hub. Dome™ DMS01 Siren comes with a 1-year limited warranty. Measurements in inches: 2.625 x 2.625 x 1.125. Dome™ Home Automation Z-Wave devices give your family peace of mind and security you can count on. With Dome™, you’re always connected and always covered. |
|---|
Brand | Dome |
|---|
Product Identifier | DMS01 |
|---|
OEM Version | HW: 48 FW: 2.65 |
|---|
Hardware Platform | ZM5202 |
|---|
Z-Wave Version | 6.51.08 |
|---|
Library Type | SLAVE_ROUTING |
|---|
Device Type | Siren |
|---|
Role Type | ROLE_TYPE_SLAVE_SLEEPING_LISTENING |
|---|
Manufacturer ID | 0x021F |
|---|
Product Type ID | 0x0003 |
|---|
Product ID | 0x0088 |
|---|
User Icon | 0x0F00 |
|---|
Installer Icon | 0x0F00 |
|---|
Frequency Plans | US: 916.00MHz, 908.40MHz |
|---|
Categories | Security Add-Ons |
|---|
Countries / Regions | United States of America |
|---|
Supported Command Classes | Identifier | Name | Key | Version |
|---|
COMMAND_CLASS_POWERLEVEL | Powerlevel | 0x73 | 1 | COMMAND_CLASS_BATTERY | Battery | 0x80 | 1 | COMMAND_CLASS_SWITCH_BINARY | Switch Binary | 0x25 | 1 | COMMAND_CLASS_BASIC | Basic | 0x20 | 1 | COMMAND_CLASS_CONFIGURATION | Configuration | 0x70 | 1 | COMMAND_CLASS_VERSION_V2 | Version V2 | 0x86 | 2 | COMMAND_CLASS_DEVICE_RESET_LOCALLY | Device Reset Locally | 0x5A | 1 | COMMAND_CLASS_ZWAVEPLUS_INFO_V2 | Z-Wave Plus Info V2 | 0x5E | 2 | COMMAND_CLASS_ASSOCIATION_V2 | Association V2 | 0x85 | 2 | COMMAND_CLASS_ASSOCIATION_GRP_INFO | Association Group Info | 0x59 | 1 | COMMAND_CLASS_NOTIFICATION_V6 | Notification V6 | 0x71 | 6 | COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2 | Manufacturer Specific V2 | 0x72 | 2 |
|
|---|
Documents | Category | Description | File |
|---|
Manual_Primary_Lang | Product or Owner's Manual | |
|
|---|
Features | Feature | Values |
|---|
Battery Quantity | | Battery Type | | Color | |
|
|---|
Association Groups | Group Number | Maximum Nodes Supported | End Point ID | Description |
|---|
2 | 5 | 0 | Group 2 can hold five members, and the Siren sends a single command to this Association Group, the Binary Switch Report, whenever the Siren is turned on or off. | 3 | 5 | 0 | Group 2 can hold five members, and the Siren sends a single command to this Association Group, a Notification Report, whenever the Siren is turned on or off. | 1 | 5 | 0 | Group 1 is the “Lifeline” group, which can hold five members, typically including the main Z-Wave controller. The Siren sends this group a Notification Report and a Binary Switch Report when the siren is turned on or off. It also sends this group a Battery Report in reponse to Battery Get commands and a Locally Reset Notification upon local reset. |
|
|---|
Configuration Parameters | Parameter Number | Name | Description | Format | Size | Min Value | Max Value | Default Value | Parameter Values |
|---|
4 | Secondary Notification Volume Level | This parameter sets the volume of the Chime (secondary) sound. There are three possible volume levels available. | 0 | 1 | 0 | 0 | 2 | From | To | Description |
|---|
3 | 3 | High Volume | 1 | 1 | Low Volume | 2 | 2 | Medium Volume |
| 5 | Primary Notification Sound | The Siren offers ten different sounds to use as the Siren (primary) notification. This parameter sets the Siren (primary) notification sound. | 0 | 1 | 0 | 0 | 9 | From | To | Description |
|---|
1 | 10 | Tone Index Number |
| 7 | Toggle Secondary Chime | This Parameter toggles between the Primary and Secondary notification sound to be played when the Siren receives a BINARY_SWITCH_SET(FF) command. | 0 | 1 | 0 | 0 | 1 | From | To | Description |
|---|
1 | 1 | Primary Notification Will Play | 2 | 2 | Secondary Notification Will Play |
| 2 | Primary Notification Length | This parameter defines the length of the Alarm/primary notification. | 0 | 1 | 0 | 0 | 2 | From | To | Description |
|---|
1 | 1 | 30 Sec | 2 | 2 | 1 Min | 3 | 3 | 5 Min | -1 | -1 | Plays until battery dies |
| 3 | Secondary Notification Length | This parameter defines the length of the Chime/secondary notification. | 0 | 1 | 0 | 0 | 1 | From | To | Description |
|---|
-1 | -1 | Chime Will Not Play | 0 | 0 | Does Not Stop | 1 | 127 | Chime Duration (in Minutes) | -128 | -2 | Chime Duration (in Minutes; -128=128 min, -2=254 min) |
| 6 | Secondary Notification Sound | If Parameter 7 is set to 02, the Siren will play a secondary chime sound instead of the main alarm. The Siren offers ten different sounds to use as the Chime (secondary) notification. This parameter sets the Chime (secondary) notification sound. | 0 | 1 | 0 | 0 | 10 | From | To | Description |
|---|
1 | 10 | Tone Index Number |
| 1 | Primary Notification Volume Level | This parameter sets the volume of the Siren (primary) sound. There are three possible volume levels available. | 0 | 1 | 0 | 0 | 2 | From | To | Description |
|---|
1 | 1 | Low Volume | 2 | 2 | Medium Volume | 3 | 3 | High Volume |
|
|
|---|
Texts | ID | Description | Value |
|---|
6 | Additional Special Features | Use the Binary Switch command class to trigger the main siren, or the Indicator. Set command to trigger one of ten different secondary chime notifications (indicator.set accepts values from 01~0A.) | 5 | Factory Reset | To disconnect from the Z-Wave Network and restore factory default settings:
1. Open the Back Plate and make sure the Siren is powered.
1. Hold the Connect Button for 10 seconds until the LED Ring blinks once, then release the button.
Only do this if the controller is missing or otherwise unreachable! | 2 | Exclusion | Follow the instructions for your Z-Wave certified Controller to enter exclusion mode.
When prompted by the Controller:
1. Remove the Back Plate of the Siren.
2. Press the Connect Button quickly 3 times in a row.
The LED Ring will flash five times indicating exclusion/disconnection. | 1 | Inclusion | Follow the instructions for your Z-Wave certified Controller to enter inclusion mode.
When prompted by the Controller:
1. For proper inclusion, bring the Siren to the final location where it will be used. *
2. Remove the Back Plate of the Siren.
3. Remove the Battery Tabs.
4. Press the Connect Button quickly 3 times in a row.
The LED Ring will flash five times indicating inclusion.
*For non Z-Wave Plus networks, please consult the owner’s manual for your primary controller to determine the best method and location for adding the Siren to your Z-Wave network. |
|
|---|
Supports NWI | Yes |
|---|
Supports Explorer Frames | Yes |
|---|
Is Flirs | Yes |
|---|
