Product Recognition | |
|---|
Certification Number | ZC10-16125336 |
|---|
Name | Plug-in Smart Dimmer, Dual Plug |
|---|
Short Description | Transform any home into a smart home with the Jasco Z-Wave Plug-In Smart Dimmer. |
|---|
Long Description | Transform any home into a smart home with the Jasco Z-Wave Plug-In Smart Dimmer. The Smart Dimmer enables wireless control of on/off and dim functions for standard incandescent table and floor lamps, as well as dimmable fluorescent, LED and CFL fixtures and more! Use the dimmer control to customize the lighting output and create the perfect ambiance for any room. The space-saving horizontal module plugs into a standard wall receptacle without blocking the second outlet or obstructing placement of furniture. The Dimmer provides one Z-Wave enabled outlet for the lamp you would like to control. Take control of your home lighting with Jasco Z-Wave Smart Lighting Controls! |
|---|
Brand | Jasco Products Company |
|---|
Product Identifier | 28170/ZW3105 |
|---|
OEM Version | HW: 255 FW: 05.05 |
|---|
Hardware Platform | ZM5202 |
|---|
Z-Wave Version | 6.51.06 |
|---|
Library Type | SLAVE_ENHANCED_232 |
|---|
Device Type | Light Dimmer Switch |
|---|
Role Type | ROLE_TYPE_SLAVE_ALWAYS_ON |
|---|
Manufacturer ID | 0x0063 |
|---|
Product Type ID | 0x5044 |
|---|
Product ID | 0x3039 |
|---|
User Icon | 06 00 |
|---|
Installer Icon | 06 00 |
|---|
Frequency Plans | US: 916.00MHz, 908.40MHz |
|---|
Categories | All Lighting Devices, Dimming Lighting Devices |
|---|
Countries / Regions | United States of America |
|---|
Controlled Command Classes | Identifier | Name | Key | Version |
|---|
COMMAND_CLASS_BASIC | Basic | 0x20 | 1 |
|
|---|
Documents | Category | Description | File |
|---|
Manual_Primary_Lang | Product or Owner's Manual | |
|
|---|
Features | Feature | Values |
|---|
Firmware Updatable | Value |
|---|
Updatable by Consumer by RF |
|
|
|---|
Association Groups | Group Number | Maximum Nodes Supported | End Point ID | Description |
|---|
1 | 5 | 0 | Z-Wave Plus Lifeline | 2 | 5 | 0 | Association Group 2 supports Basic Set and is controlled with the local load | 3 | 5 | 0 | Association Group 3 supports Basic Set and is controlled by double pressing the button |
|
|---|
Configuration Parameters | Parameter Number | Name | Description | Format | Size | Min Value | Max Value | Default Value | Parameter Values |
|---|
3 | LED Light | When shipped from the factory, the LED is set to turn ON when the connected light is turned On. This is the default setting and can be changed if your primary controller supports the node configuration function or by a manual method. To make the LED turn ON when the light is turned ON, change parameter 3’s value to “1”. To turn the LED OFF at all times, change parameter 3’s value to 2. | 0 | 1 | 0 | 0 | 0 | From | To | Description |
|---|
1 | 1 | LED On when light is turned On | 2 | 2 | LED always Off | 0 | 0 | default |
| 7 | Dim Rate Adjustments (From Z-Wave Controller) | Number of steps or levels | 0 | 1 | 0 | 0 | 1 | From | To | Description |
|---|
1 | 99 | Number of steps or levels |
| 8 | Dim Rate Adjustments (From Z-Wave Controller) | Timing of steps | 0 | 2 | 0 | 0 | 3 | From | To | Description |
|---|
1 | 255 | Timing of steps |
| 9 | Dime Rate Adjustments (When Manually Controlled) | Number of steps or levels | 0 | 1 | 0 | 0 | 1 | From | To | Description |
|---|
1 | 99 | Number of steps or levels |
| 10 | Dim Rate Adjustments (When Manually Controlled) | Timing of steps | 0 | 2 | 0 | 0 | 3 | From | To | Description |
|---|
1 | 255 | Timing of steps |
| 11 | Dim Rate Adjustments (When Receiving All-On/Off Commands) | Number of steps or levels | 0 | 1 | 0 | 0 | 1 | From | To | Description |
|---|
1 | 99 | Number of steps or levels |
|
|
|---|
Texts | ID | Description | Value |
|---|
1 | Inclusion | 1. Follow the instructions for your Z-Wave certified controller to add
the smart dimmer to the Z-Wave network.
2. Once the controller is ready to add your smart dimmer, single
press and release the manual/program button on the smart
dimmer to add it in the network.
Please reference the controller/gateway’s manual for instructions. | 2 | Exclusion | 1. Follow the instructions for your Z-Wave certified controller to
remove a device from the Z-Wave network.
2. Once the controller is ready to remove your device, press and
release the manual/program button on the smart dimmer to
remove it from the network. | 5 | Factory Reset | To return your dimmer to factory defaults:
1. If plugged in, unplug the dimmer from the receptacle.
2. Press and hold the top button for at least 3 seconds while you
plug the dimmer into a receptacle.
Note: This should only be used in the event your networks’ primary
controller is missing or otherwise inoperable. |
|
|---|
Supports NWI | Yes |
|---|
Supports Explorer Frames | Yes |
|---|
