| 4 | Configure Door Bell Music Volume | This parameter defines the output volume when siren plays alarm music. Door Bell music volume is divided into 3 stages, Low (Parameter is set to ‘1’), Middle (Parameter is set to ‘2’), High(Parameter is set to ‘3’). Default value is ‘1’. | 0 | 1 | 0 | 0 | 1 | | From | To | Description |
|---|
| 1 | 3 | unsigned |
|
| 5 | Configure Alarm Music Index | This parameter defines the alarm music index for siren play different music when alarm occurs. There are 10 different music for user selection. | 0 | 1 | 0 | 0 | 10 | | From | To | Description |
|---|
| 1 | 10 | unsigned |
|
| 6 | Configure Door Bell Music Index | This parameter defines the door bell music index for siren play different music when alarm occurs. There are 10 different music for user selection. | 0 | 1 | 0 | 0 | 9 | | From | To | Description |
|---|
| 1 | 10 | unsigned |
|
| 8 | Configure Alarm Led Enable | This parameter defines the default led enable status when siren is on for ALARM MUSIC MODE. If parameter is set to ‘0’, led will be disable. If parameter is set t0 ‘1’, led will be enable. When siren is on, the led will blink. | 0 | 1 | 0 | 0 | 1 | | From | To | Description |
|---|
| 0 | 1 | unsigned |
|
| 9 | Configure Door Bell Led Enable | This parameter defines the default led enable status when siren is on for DOOR BELL MUSIC MODE. If parameter is set to ‘0’, led will be disable. If parameter is set t0 ‘1’, led will be enable. When siren is on, the led will blink. | 0 | 1 | 0 | 0 | 0 | | From | To | Description |
|---|
| 0 | 1 | unsigned |
|
| 7 | Configure Default Siren On Mode | This parameter defines the default music index, volume and the duration time forsiren on. This parameter can be selected between ALARM MUSIC and DOOR BELL MUSIC. The settings for ALARM MUSIC MODE defines by Param #1, #2 and #5. The settings for DOOR BELL MUSIC MODE defines by Param #3, #4 and #6. If parameter is set to ‘1’, siren will select ALARM MUSIC MODE to play music; If parameter is set to ‘2’, siren will select DOOR BELL MUSIC MODE to play music; | 0 | 1 | 0 | 0 | 1 | | From | To | Description |
|---|
| 1 | 2 | unsigned |
|
| 1 | Configure Alarm Music Volume | This parameter defines the output volume when siren plays door bell music. Door Bell music volume is divided into 3 stages, Low (Parameter is set to ‘1’), Middle (Parameter is set to ‘2’), High (Parameter is set to ‘3’). Default value is ‘3’. | 0 | 1 | 0 | 0 | 3 | | From | To | Description |
|---|
| 1 | 3 | unsigned |
|
| 2 | Configure Alarm Music Duration Time | This Parameter defines the alarm music duration time when siren receive an alarm sensor notification report or an alarm command from controller. The duration time is divided into 5 stages: Siren is not on (Parameter is set to ‘0’), 30 second (Parameter is set to ‘1’), 1 minute (Parameter is set to ‘2’), 5 minute (Parameter is set to ‘3’) and Siren is always on until battery is dead (Parameter is set to ‘0xFF’). Default value is ‘2’. The value for this parameter is unsigned value. Values above 127 may need to be entered as hexadecimal values or signed negative values; please consult the owner's manual of your controller for entering unsigned values. | 0 | 1 | 0 | 0 | 2 | | From | To | Description |
|---|
| 0 | 3 | unsigned | | 255 | 0 | unsigned |
|
| 3 | Configuring Door Bell Music Duration Time | This parameter defines the door bell music duration time when siren receives a door/window sensor notification report or an alarm command (BASIC_SET = 0x02) from controller. The door bell music will be played always if this parameter is set to ‘0xFF’. The door bell music will not be played if this parameter is set to ‘0’. Other values are the door bell music playing duration time. Unit: Time. The value for this parameter is unsigned value. Values above 127 may need to be entered as hexadecimal values or signed negative values; please consult the owner's manual of your controller for entering unsigned values. | 0 | 1 | 0 | 0 | 1 | | From | To | Description |
|---|
| 0 | 255 | unsigned |
|
