Product Recognition | |
|---|
Certification Number | ZC10-17025450 |
|---|
Name | Z-Wave Plus Single Gang Toggle Wireless Light Switch |
|---|
Short Description | The Z-Wave Plus Single Gang Toggle Wireless Light Switch is Ecolink's battery powered light switch cover that allows remote control of the lights within a house via Z-Wave Plus Certified Connection. |
|---|
Long Description | Easy to install in one minute by removing the existing switch plate and installing the Z-Wave Plus Single Gang Toggle Wireless Light Switch on the switch. No need to touch any electrical wiring.
Product Specifications:
• For indoor use only
• Operating frequency: 908.42 MHz
• Operating temperature: 0° – 49°C, 32° – 120°F (ambient temperature)
• Operating humidity 5-95% non-condensing
• 2 AA batteries
• Battery Life: Approximatly 1 year |
|---|
Brand | Ecolink Intelligent Technology |
|---|
Product Identifier | TLS-ZWAVE5 |
|---|
OEM Version | HW: 255 FW: 10.01 |
|---|
Hardware Platform | ZM5202 |
|---|
Z-Wave Version | 6.51.09 |
|---|
Library Type | SLAVE_ENHANCED |
|---|
Device Type | On/Off Power Switch |
|---|
Role Type | ROLE_TYPE_SLAVE_SLEEPING_LISTENING |
|---|
Manufacturer ID | 0x014A |
|---|
Product Type ID | 0x0006 |
|---|
Product ID | 0x0002 |
|---|
User Icon | 0x1D00 |
|---|
Installer Icon | 0x1D00 |
|---|
Frequency Plans | US: 916.00MHz, 908.40MHz |
|---|
Categories | All Lighting Devices, Lighting Accessories |
|---|
Countries / Regions | United States of America |
|---|
Supported Command Classes | Identifier | Name | Key | Version |
|---|
COMMAND_CLASS_POWERLEVEL | Powerlevel | 0x73 | 1 | COMMAND_CLASS_BATTERY | Battery | 0x80 | 1 | COMMAND_CLASS_SWITCH_BINARY | Switch Binary | 0x25 | 1 | COMMAND_CLASS_BASIC | Basic | 0x20 | 1 | COMMAND_CLASS_VERSION_V2 | Version V2 | 0x86 | 2 | COMMAND_CLASS_DEVICE_RESET_LOCALLY | Device Reset Locally | 0x5A | 1 | COMMAND_CLASS_ZWAVEPLUS_INFO_V2 | Z-Wave Plus Info V2 | 0x5E | 2 | COMMAND_CLASS_ASSOCIATION_V2 | Association V2 | 0x85 | 2 | COMMAND_CLASS_ASSOCIATION_GRP_INFO | Association Group Info | 0x59 | 1 | COMMAND_CLASS_MANUFACTURER_SPECIFIC | Manufacturer Specific | 0x72 | 1 |
|
|---|
Documents | Category | Description | File |
|---|
Manual_Primary_Lang | Product or Owner's Manual | |
|
|---|
Features | Feature | Values |
|---|
Battery Quantity | | Battery Type | | Color | | Firmware Updatable | Value |
|---|
Updatable by Consumer by RF |
| Switch Type | |
|
|---|
Association Groups | Group Number | Maximum Nodes Supported | End Point ID | Description |
|---|
2 | 5 | 0 | Z-Wave Plus Lifeline |
|
|---|
Texts | ID | Description | Value |
|---|
2 | Exclusion | 1) Any Z-Wave Plus Device can be removed from any Z-Wave Plus controller. Follow the directions to put your Z-Wave Plus Controller into exclusion mode.
2) Press the inclusion / exclusion button on the Z-Wave Plus Decora Light Switch. | 1 | Inclusion | The Z-Wave Plus Toggle Light Switch must be added to a Z-Wave Plus network prior to use. To include the device in a network both the device and the network controller must be in inclusion mode at the same time. Refer to the instructions provided by the manufacturer of your specific controller for details on initiating the controller’s inclusion mode.
1) Verify that the Z-Wave Plus controller you are using is compatible with the Z-Wave Plus Decora Light Switch.
2) Locate the light switch desired to be used with the Z-Wave Plus Decora Light Switch.
3) Put your Z-Wave Plus Controller into add (inclusion) mode.
4) Press the inclusion button on the Z-Wave Plus Decora Light Switch. (Figure 1)
5) The LED on the front of the unit will turn off if successfully included into a network. | 5 | Factory Reset | The Z-Wave Plus device is automatically factory defaulted when removed from a Z-Wave Plus network. Please use this procedure only when the network primary controller is missing or otherwise inoperable. |
|
|---|
Supports NWI | Yes |
|---|
Supports Explorer Frames | Yes |
|---|
Is Flirs | Yes |
|---|
Radio Range Z-Wave (m) | 40 |
|---|
.png)