Product Recognition | |
|---|
Certification Number | ZC10-17035489 |
|---|
Name | RS LED D2 Z-Wave |
|---|
Short Description | High-frequency sensor-switched indoor light RS LED D2 Z-Wave can be integrated into the Smart Friends system or any other Z-Wave network, ideal for corridors, hallways, stairwells and bathrooms. 11W for 600 lumens of light, STEINEL LED lighting system, 360° high-frequency sensor with 3-8 m reach, switches light ON without a sound, with ambient light. |
|---|
Long Description | Sleek, attractive lines. Opting for the RS LED D2 designer indoor luminaire, you'll be giving your home a real designer highlight with pleasant LED illumination. With its stunning looks and intelligent technology, this light provides the last word in stylish home convenience. Once fitted to the wall or ceiling, the high-frequency sensor switches it 'ON' and 'OFF' in complete silence and all automatically. The light is child's play to install and the function settings on the product are easy to understand too. Your neighbours will be amazed.
Smart home included.
The optional Smart Friends Box and the free Smart Friends app make it easy to set the RS PRO LED D2 Z-Wave via smart phone or tablet. The light can also be switched ON or OFF via app. Other Steinel products can also be interconnected. If you wish, this also works via remote control when you are out. That completes your own light management system.
Along with STEINEL products, Smart Friends solutions from PAULMANN, SCHELLENBERG and ABUS can also integrated. Smart homes from a brand-name provider. |
|---|
Brand | Steinel GmbH |
|---|
Product Identifier | 6772 |
|---|
OEM Version | HW: 1 FW: 1.00:01.00 |
|---|
Hardware Platform | ZM5202 |
|---|
Z-Wave Version | 6.51.09 |
|---|
Library Type | SLAVE_ENHANCED_232 |
|---|
Device Type | On/Off Power Switch |
|---|
Role Type | ROLE_TYPE_SLAVE_ALWAYS_ON |
|---|
Manufacturer ID | 0x0271 |
|---|
Product Type ID | 0x0001 |
|---|
Product ID | 0x1A74 |
|---|
User Icon | 0x0700 |
|---|
Installer Icon | 0x0700 |
|---|
Frequency Plans | EU: 869.85MHz, 868.40MHz |
|---|
Categories | All Lighting Devices |
|---|
Countries / Regions | European Union |
|---|
Supported Command Classes | Identifier | Name | Key | Version |
|---|
COMMAND_CLASS_SCENE_ACTUATOR_CONF | Scene Actuator Conf | 0x2C | 1 | COMMAND_CLASS_NODE_NAMING | Node Naming | 0x77 | 1 | COMMAND_CLASS_POWERLEVEL | Powerlevel | 0x73 | 1 | COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3 | Multi-Channel Association V3 | 0x8E | 3 | COMMAND_CLASS_SWITCH_ALL | Switch All | 0x27 | 1 | COMMAND_CLASS_APPLICATION_STATUS | Application Status | 0x22 | 1 | COMMAND_CLASS_SWITCH_BINARY | Switch Binary | 0x25 | 1 | COMMAND_CLASS_BASIC | Basic | 0x20 | 1 | COMMAND_CLASS_CONFIGURATION | Configuration | 0x70 | 1 | COMMAND_CLASS_SENSOR_MULTILEVEL_V4 | Sensor Multilevel V4 | 0x31 | 4 | COMMAND_CLASS_VERSION_V2 | Version V2 | 0x86 | 2 | COMMAND_CLASS_DEVICE_RESET_LOCALLY | Device Reset Locally | 0x5A | 1 | COMMAND_CLASS_ZWAVEPLUS_INFO_V2 | Z-Wave Plus Info V2 | 0x5E | 2 | COMMAND_CLASS_ASSOCIATION_V2 | Association V2 | 0x85 | 2 | COMMAND_CLASS_ASSOCIATION_GRP_INFO | Association Group Info | 0x59 | 1 | COMMAND_CLASS_MULTI_CHANNEL_V4 | Multi-Channel V4 | 0x60 | 4 | COMMAND_CLASS_MANUFACTURER_SPECIFIC | Manufacturer Specific | 0x72 | 1 | COMMAND_CLASS_SCENE_ACTIVATION | Scene Activation | 0x2B | 1 | COMMAND_CLASS_FIRMWARE_UPDATE_MD_V3 | Firmware Update Meta-Data V3 | 0x7A | 3 | COMMAND_CLASS_NOTIFICATION_V4 | Notification V4 | 0x71 | 4 |
|
|---|
Controlled Command Classes | Identifier | Name | Key | Version |
|---|
COMMAND_CLASS_BASIC | Basic | 0x20 | 1 |
|
|---|
Documents | Category | Description | File |
|---|
Manual_Primary_Lang | Product or Owner's Manual | |
|
|---|
Features | Feature | Values |
|---|
Supported Notification Types | | Switch Load Capacity Watts | | Sensors | Value |
|---|
Motion/No Motion (Binary) | Luminance |
| Switch Load Capacity Current | | Switch Load Capacity Volt-Ampere | | Z-Wave Scene Type | | Firmware Updatable | Value |
|---|
Updatable by Consumer by RF |
| Outdoor Use | | Neutral Wire Required | | Electric Load Type | | Color | |
|
|---|
Association Groups | Group Number | Maximum Nodes Supported | End Point ID | Description |
|---|
1 | 1 | 0 | Z-Wave Plus Lifeline
- Device Reset Locally
- Notifications:
0x09 (System) – Hardware failure with manufacturer proprietary code (0x03)
0x09 (System) – Software failure with manufacturer proprietary code (0x04)
0x07 (Home security) – Motion Begin event (0x08)
0x07 (Home security) – Motion End event (0x00, 0x08)
- Binary Switch Report – lamp state
- Multilevel Sensor Report – value of internal ambient light sensor
|
|
|---|
Configuration Parameters | Parameter Number | Name | Description | Format | Size | Min Value | Max Value | Default Value | Parameter Values |
|---|
10 | OFF_BEHAVIOUR | Behaviour after BASIC OFF ( and similar commands ). If a transition ( even with zero change ) with a non-default duration is to be processed, the transition cannot be interrupted by any motion event in any case. for values 1-209 - Lamp is switched off and remains so until after a specified timeout once a new motion event (local or remote) is received. | 0 | 2 | 0 | 0 | 10 | From | To | Description |
|---|
101 | 200 | timeout: 1 minute (101) to 100 minutes (200) 1-minute resolution | 201 | 209 | timeout: 1 hour (201) to 9 hours (209) in 1-hour resolution | 0 | 0 | Lamp is switched off and remains so until any new motion event (local or remote) is received. | 1 | 100 | timeout: 1 second (1) to 100 seconds (100) in 1-second resolution | 255 | 255 | Lamp is switched off for TIME (cfg 1). It does not wait for a motion event and works normally via current motion evaluation |
| 11 | ON_BEHAVIOUR | Behaviour after BASIC ON (and similar commands). If a transition (even with zero change) with a non-default duration is to be processed, the transition cannot be interrupted by any motion event in any case. for values 1-209 - Lamp is switched on and remains so until after a specified timeout once a new motion event (local or remote) is received. It then works normally via current motion evaluation. | 0 | 2 | 0 | 0 | 255 | From | To | Description |
|---|
1 | 100 | timeout: 1 second (1) to 100 seconds (100) in 1-second resolution | 0 | 0 | Lamp is switched on and remains so until any new motion event (local or remote) is received. It then works normally via current motion evaluation. Notice – during the day, this mode cannot be ended remotely due to motion events not being transmitted – only via local motion sensor if enabled. | 101 | 200 | timeout: 1 minute (101) to 100 minutes (200) 1-minute resolution | 201 | 209 | timeout: 1 hour (201) to 9 hours (209) in 1-hour resolution | 255 | 255 | Lamp is switched on for TIME (cfg 1). It does not wait for a motion event and works normally via current motion evaluation. |
| 5 | SENSITIVITY | Motion Sensor (radar) Sensitivity [%] Value can be controlled via potentiometer – potentiometer value is used as the default value and any potentiometer movement rewrites the current setting | 0 | 1 | 0 | 0 | 100 | | 6 | BRIGHTNES MEAS INTERVAL | Brightness measuring interval [ minutes ] Interval for ambient light measuring when lamp is on ( lamp switches off shortly and measures ). 0=function is off | 0 | 1 | 0 | 0 | 0 | From | To | Description |
|---|
0 | 0 | function is off | 5 | 120 | minutes |
| 8 | GLOBAL_LIGHT | Use External Ambient Light Value When GLOBAL_LIGHT mode is ON – device overrides its own light sensor values and uses Light report values from any Z-Wave light sensor instead – this has to be configured appropriately to send light automatically. If the last remote light level value is older than 30 minutes, the internal light value is used again until the next external value is received. | 0 | 1 | 0 | 0 | 1 | From | To | Description |
|---|
1 | 1 | ON function | 0 | 0 | OFF function |
| 9 | SLAVE_MODE | Can disable sensor controll “Stupid” mode (bit 2 = 1): - has higher priority then slave mode. - lamp is permanently on (usefull for simple power wall switch controlling). Slave mode ( bit 0 = 1 ): - only if included in Z-Wave network - usefull for controlling via third-party sensor - lamp is directly controlled via Z-Wave, internal sensors are not used for controlling it. Central unit checking ( bit 1 = 1 ): ( usefull especialy for controlling via gateway ) When Slave bit is 0: - lamp signalises fail of lifeline connection ( if this bit is zero fail of lifeline connection is not signalised ) When slave bit is 1: - lamp checks presence of Z-Wave device in lifeline group ( gateway ). If it is not present for 2 minutes ( testing repeatedly every 30 seconds ) device switches to normal mode in the same way as after the end of local disabled mode ( ON_BEHAVIOUR ) - The device checks every 1 minute for recovery of Lifeline connection. - if no lifeline specified - it works in normal mode Be careful with this option, lamp stops using it’s own motion sensor in Slave and Stupid mode. | 0 | 1 | 0 | 0 | 2 | From | To | Description |
|---|
0 | 0 | Normal mode | 1 | 1 | Slave mode without gateway checking | 2 | 2 | Normal mode with lifeline error signalisation | 3 | 3 | Slave mode with gateway checking | 4 | 4 | "Stupid mode" - lamp permanetly on |
| 1 | TIME | Duration of light after motion detection. | 0 | 2 | 0 | 0 | 180 | From | To | Description |
|---|
5 | 900 | seconds |
| 2 | LIGHT | Light threshold [ lx ] | 0 | 2 | 0 | 0 | 2000 | From | To | Description |
|---|
0 | 0 | run Learn ambient light sequence (the level is set automatically) | 2 | 1999 | lux | 2000 | 2000 | 2000 - is used as daylight ( always night mode) |
|
|
|---|
Texts | ID | Description | Value |
|---|
1 | Inclusion | Inclusion: Add
Adding RS LED D2 to the Smart Friends system:
1 Download Smart Friends app from the app store.
2 In the rooms view, activate the edit mode.
3 Select the chosen room and press the ""Add device"" button.
4 Briefly press button 5 on the device to set it to inclusion mode. Status LED 8 lights up to show that this mode is selected.
5 The app displays a confirmation message once inclusion has been successfully completed. | 6 | Additional Special Features | Setting RS LED D2 via the app
–– After programming, an ON/OFF scene is automatically created in the app.
–– The following setting values are then automatically stored:
a) Twilight setting = control-dial setting
b) Time setting = 3-minute switch-off delay
–– The twilight and time settings can be selected to the accuracy of one lux / second in the ""Scene"" menu. | 5 | Factory Reset | Returning RS LED D2 to factory settings:
Please use this procedure only when the network primary controller is missing or otherwise inoperable.
1 Briefly press button e and directly afterwards keep it pressed for 5 seconds.
2 Status LED h briefly flashes to show that the light has been reset.
3 The device is now no longer included in the Z-Wave system and has been returned to factory settings. | 2 | Exclusion | Exclusion: Remove
Removing RS LED D2 from the Smart Friends system:
1 In the rooms view, activate the edit mode.
2. Select the device in the chosen room and press the ""delete"" button. Press delete and follow the instructions in the app.
3 Briefly press button e on the device to set it to exclusion mode. The red status LED h lights up to show that this mode is selected.
4 The app displays a confirmation message once exclusion has been successfully completed. |
|
|---|
Supported Notification Types | Notification Type | Event / State |
|---|
Home Security | (Refer to parameters): State idle | System | (Refer to parameters): State idle |
|
|---|
Supported Multilevel Sensors | Multilevel Sensor Type |
|---|
0x02 | Illuminance |
|
|---|
Supports NWI | Yes |
|---|
Supports Explorer Frames | Yes |
|---|
