COMMAND_CLASS_POWERLEVEL

Powerlevel

0x73

1

COMMAND_CLASS_BATTERY

Battery

0x80

1

COMMAND_CLASS_CONFIGURATION

Configuration

0x70

1

COMMAND_CLASS_VERSION_V2

Version V2

0x86

2

COMMAND_CLASS_WAKE_UP_V2

Wake Up V2

0x84

2

COMMAND_CLASS_DEVICE_RESET_LOCALLY

Device Reset Locally

0x5A

1

COMMAND_CLASS_ZWAVEPLUS_INFO_V2

Z-Wave Plus Info V2

0x5E

2

COMMAND_CLASS_ASSOCIATION_V2

Association V2

0x85

2

COMMAND_CLASS_ASSOCIATION_GRP_INFO

Association Group Info

0x59

1

COMMAND_CLASS_CENTRAL_SCENE_V3

Central Scene V3

0x5B

3

COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2

Manufacturer Specific V2

0x72

2

COMMAND_CLASS_SWITCH_MULTILEVEL_V3

Switch Multilevel V3

0x26

3

COMMAND_CLASS_BASIC_V2

Basic V2

0x20

2

COMMAND_CLASS_SCENE_ACTIVATION

Scene Activation

0x2B

1

Manual_Primary_Lang

Product or Owner's Manual

Z-Wave Scene Type

Battery Type

Battery Quantity

9

8

0

Z-Wave Plus Lifeline + 8 association grouops corresponding to the 8 device keys of the RemSwiid™ remote

1

Set priority Association Group number for an Association Source Node

1 = Association Group 1 (key A = AG#2) 2 = Association Group 2 (key A = AG#1)

0

Yes

1

1

2

1

7

Function of RemSwiid™ Device key F

0 = Disabled 1 = Basic/Multilevel Switch 7 2 = Control Central Scene 6 3 = Control Scene Activation 6

0

Yes

1

0

3

1

8

Function of RemSwiid™ Device key G

0 = Disabled 1 = Basic/Multilevel Switch 8 2 = Control Central Scene 7 3 = Control Scene Activation 7

0

Yes

1

0

3

1

9

Function of RemSwiid™ Device key H

0 = Disabled 1 = Basic/Multilevel Switch 9 2 = Control Central Scene 8 3 = Control Scene Activation 8

0

Yes

1

0

3

1

10

Send unsolicited Battery Report on Wake Up

0 = No 1 = To same node as wake up notification 2 = Broadcast to neighbours

0

Yes

1

0

2

0

11

Dimming mode

0 = Continues dimming until “Stop” Command key is pressed 1 = Stops dimming when “Up” or “Down” Command key is released

0

Yes

1

0

1

0

2

Function of RemSwiid™ Device key A

0 = Disabled 1 = Basic/Multilevel Switch 2 2 = Control Central Scene 1 3 = Control Scene Activation 1

0

Yes

1

0

3

1

4

Function of RemSwiid™ Device key C

0 = Disabled 1 = Basic/Multilevel Switch 4 2 = Control Central Scene 3 3 = Control Scene Activation 3

0

Yes

1

0

3

1

5

Function of RemSwiid™ Device key D

0 = Disabled 1 = Basic/Multilevel Switch 5 2 = Control Door Locks 4 3 = Control Scene Activation 4

0

Yes

1

0

3

1

6

Function of RemSwiid™ Device key E

0 = Disabled 1 = Basic/Multilevel Switch 6 2 = Control Central Scene 5 3 = Control Scene Activation 5

0

Yes

1

0

3

1

3

Function of RemSwiid™ Device key B

0 = Disabled 1 = Basic/Multilevel Switch 3 2 = Control Central Scene 2 3 = Control Scene Activation 2

0

Yes

1

0

3

1

24

Controller Exclusion

RemSwiid™ remote until the blue Z-Wave LED in the centre of the remote lights up (after 2-3 seconds) and stays lit indicating you are in the Setup Mode. 2. Press again once (1x) but only the ""Down"" command key and the red LED in the centre of your RemSwiid™ will blink to indicate that it is now in the Exclusion Mode. 3. Put the Z-Wave device you want to exclude in program mode (sends out NIF) whereby the red LED of the remote will turn off and the green LED will then light up for 1-2 seconds to indicate success and after that all the LEDs will turn off.

23

Controller Inclusion

1. Press and hold both the ""Up"" and ""Down"" command keys of the RemSwiid™ remote until the blue Z-Wave LED in the centre of the remote lights up (after 2-3 seconds) and stays lit indicating you are in the Setup Mode. 2. Press again once (1x) but only the ""Up"" command key and the green LED in the centre of your RemSwiid™ will blink to indicate that it is now in the Inclusion Mode. 3. Put the Z-Wave device you want to include in program mode (sends out NIF) whereby the green LED of the remote will stay continuously lit up for 1-2 seconds to indicate success and then all the LEDs will turn off.

4

Device Wake-Up

In order wake up the RemSwiid™ remote (force into the listening mode), press twice (2x) on the ""All"" key and the blue Z-Wave LED will light up and stay lit for 30 seconds. It is possible to exit the listening mode before the 30 seconds time out by pressing once on the Stop Command key and the blue Z-Wave LED will turn off accordingly

3

Learn Mode (adding another controller)

1. Put the primary Z-Wave controller in the inclusion mode (see user's manual of the controller) 2. Press and hold both the ""Up"" and ""Down"" command keys of the RemSwiid™ remote until the blue Z-Wave LED in the centre of the remote lights up (after 2-3 seconds) and stays lit indicating the remote is in the Learn mode (aka Setup Mode) 3. Press once on the “All” key and the both the green and red LEDs will also light up to indicate that the inclusion process can begin. The 3 LEDs will then blink rapidly and turn off to indicate that the process has completed successfully. If not successful, the LEDs will remain lit solid until they time out after 30 seconds.

5

Factory Reset

1. Press and hold both the “Stop” and “All” keys until the red and green LEDs both start blinking at the same time (after about 3 seconds) 2. Press three times (3x) on the “Up” command key of the RemSwiid™ remote and the blue Z-Wave LED will also light up. After about 2-3 seconds, the blue and red LEDs will turn off and the green LED will remain lit for 1-2 seconds indicating that the reset has been completed. Resetting the RemSwiid™ remote will result in its taking on a new randomly generated Home ID. Obviously, if the RemSwiid™ remote is the primary controller in the Z-Wave network, resetting it will result in the nodes in the network being orphaned and it will be necessary after the reset to exclude and re-include all the nodes in a network with a new Home ID. If the RemSwiid™ is being used as a secondary controller in the network, the reset procedure should only be used once it has been excluded from the network, except of course if such exclusion is not feasible (e.g. if the network’s primary controller is missing or otherwise inoperable).