There are over 4145 interoperable
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 101 | 4 | To set which report need to be sent. | 8 | Report Accumulated kWh | |
| 2 | Report Instantaneous Current (Amperes) | ||||
| 4 (Default) |
Report Instantaneous Watts | ||||
| 1 | Report Instantaneous Voltage | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 102 | 4 | To set which report need to be sent. | 1 | Report Instantaneous Voltage | |
| 4 | Report Instantaneous Watts | ||||
| 8 (Default) |
Report Accumulated kWh | ||||
| 2 | Report Instantaneous Current (Amperes) | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 103 | 4 | To set which report need to be sent. | 1 | Report Instantaneous Voltage | |
| 2 | Report Instantaneous Current (Amperes) | ||||
| 4 | Report Instantaneous Watts | ||||
| 8 | Report Accumulated kWh | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 111 | 4 | Set the interval time of sending report. | 0 to 268435456 (Default) |
Interval Seconds | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 112 | 4 | Set the interval time of sending report. | 0 to 268435456 (Default) |
Interval Seconds | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 113 | 4 | Set the interval time of sending report. | 0 to 268435456 (Default) |
Interval Seconds | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 2 | 2 | Make Smart Switch blink | 0 to 255 | Specify the time that Smart Switch should blink, in seconds. | |
| 256 to 32767 (Default) |
Specifies the cycle of on/off, the unit of it is 0.1 second. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 200 | 1 | Partner ID | 0 (Default) |
Aeon Labs Standard Product | |
| 1 to 255 | Partner ID of Partner Product | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 252 | 1 | Enable/Disable Lock Configuration | 0 (Default) |
All configuration parameters are configurable. | |
| 1 | All configuration parameters are not configurable (Locked). | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 254 | 2 | Device Tag | 0 to 32767 (Default) |
Device Tag | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 255 | 4 | Reset to default factory setting | 1431655765 | Reset the product to default factory setting and be excluded from the Z-wave network. | |
| 1 | Resets all configuration parameters to default setting. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 3 | 1 | Current Overload Protection | 0 (Default) |
Overload Protection Disabled | |
| 1 | Overload Protection is Enabled | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 80 | 1 | Enable/Disable to send notifications to associated devices to associated devices. | 0 (Default) |
Send Nothing (Disabled) | |
| 1 | Send HAIL Command | ||||
| 2 | Send BASIC Report Command | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 90 | 1 | Enable/Disable the function of parameter 91 and 92. | 0 | Configuration Parameters 91 and 92 are Disabled | |
| 1 (Default) |
Configuration Parameters 91 and 92 are Enabled | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 91 | 2 | Induce an automatic report | 0 to 32767 (Default) |
The threshold can be set from 0 to 32767 watt. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 92 | 1 | Induce an automatic report | 0 to 100 (Default) |
The threshold can be set from 0 to 100 percent. | |