There are over 4377 interoperable
| Group ID | Group Profile Name | Profile | Maximum Nodes | Description | Endpoint ID | Commands |
|---|---|---|---|---|---|---|
| 1 | 1 | 1. When the unit is powered for the first time, the unit will send a Notification Report to the node of Group 1. 2. When setting the unit or changing the unit’s status, the unit will send a Binary Switch Report to the node of Group 1. 3. When performing Reset the unit will send Device Reset Locally Notification to the node of Group1. 4. The unit can be configured to periodically report the value of W and/or kW*h to the node of Group 1 (refer to Configuration parameter 4 & 5). The interval time between two reports is at least 30 seconds. 5. The unit can be configured to report the status of wattage to the node of Group 1 on special occasions (refer to Configuration parameter 6 & 7). 6. The minimum interval time between two reports sent from this unit to the node of Group 1 is 3 seconds. Refer to Configuration parameter 2 for more information. | 0 | |||
| 2 | 4 | When the button on the unit or the wall switch is pressed, the unit will send a Basic Set command to the nodes of Group 2. When the unit is OFF, Basic Set Value = 0x00. When the unit is ON, Basic Set Value = 0xFF. | 0 |