TThere are thousands of interoperable
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 10 | 1 | Auto Report Battery Time | 0 to 127 (Default) |
Auto Report Battery Time | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 12 | 1 | Auto Report Illumination Time | 0 to 127 (Default) |
Auto Report Illumination Time | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 13 | 1 | Auto Report Temperature Time | 0 to 127 (Default) |
Auto Report Temperature Time | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 2 | 1 | Basic Set Level | 0 to 255 (Default) |
Basic Set Value | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 20 | 1 | Auto Report Tick Interval | 0 to 255 (Default) |
Auto Report Tick Interval | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 21 | 1 | Temperature Differential Report | 0 to 127 (Default) |
Temperature Differential Report | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 22 | 1 | Illumination Differential Report | 0 to 99 (Default) |
Illumination Differential Report | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 3 | 1 | PIR Sensitivity | 0 to 99 (Default) |
PIR Level | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 4 | 1 | Light Threshold | 0 to 100 (Default) |
Light Threshold | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 5 | 1 | Operation Mode | 2 | Bit1: 1 means test mode, 0 means normal mode. Notice: This bit only effect by the DIP Switch setting to “customer mode”, otherwise it decides by DIP Switch setting to Test or Normal Mode. | |
| 8 | Setting the temperature scale.0: Fahrenheit, 1:Celsius | ||||
| 16 | Disable the illumination report after event triggered. (1:Disable, 0:Enable) | ||||
| 32 | Disable the temperature report after event triggered. (1:Disable, 0:Enable) | ||||
| -128 | Disable the back key release into test mode. (1:Disable, 0:Enable) Notice: The reserve bit is allowed any value, but no effect. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 6 | 1 | Mult-Sensor Function Switch | 2 | Disable PIR integrate Illumination to turn ON the lighting nodes in the association group 2. (1:Disable, 0:Enable) | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 7 | 1 | Customer Function | 2 | Enable sending motion OFF report. (0:Disable, 1:Enable) Note: Depends on the Bit4, 0: Report Notification CC, Type: 0x07, Event: 0xFE 1: Sensor Binary Report, Type: 0x0C, Value: 0x00 | |
| 4 (Default) |
Enable PIR super sensitivity mode. (0:Disable, 1:Enable) | ||||
| 16 | Notification Type, 0: Using Notification Report. 1: Using Sensor Binary Report. | ||||
| 32 | Disable Multi CC in auto report. (1:Disable, 0:Enable) | ||||
| 64 | Disable to report battery state when the device triggered. (1:Disable, 0:Enable) | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 8 | 1 | PIR Re-Detect Interval Time | 1 to 127 (Default) |
PIR Re-Detect Interval Time | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 9 | 1 | Turn Off Light Time | 0 to 127 (Default) |
Turn Off Light Time | |