There are over 4377 interoperable
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 101 | 4 | Which report needs to be sent in Report group 1 | 64 | The humidity sensor report is selected. | |
| 128 | The light sensor report is selected. | ||||
| 1 | The battery report is selected. | ||||
| 32 | The temperature sensor report is selected. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 102 | 4 | Which report needs to be sent in Report group 2. | 128 | The light sensor report is selected. | |
| 1 | The battery report is selected. | ||||
| 32 | The temperature sensor report is selected. | ||||
| 64 | The humidity sensor report is selected. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 103 | 4 | Which report needs to be sent in Report group 3. | 32 | The temperature sensor report is selected. | |
| 64 | The humidity sensor report is selected. | ||||
| 128 | The light sensor report is selected. | ||||
| 1 | The battery report is selected. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 111 | 4 | The interval time of sending reports in Report group 1 | 5 to 2678400 (Default) |
The range of interval time is 5 to 2678400. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 112 | 4 | The interval time of sending reports in Report group 2. | 5 to 2678400 (Default) |
The range of interval time is 5 to 2678400. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 113 | 4 | The interval time of sending reports in Report group 3 | 5 to 2678400 (Default) |
The range of interval time is 5 to 2678400. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 2 | 1 | Enable/Disable waking up for 10 minutes when re-power on (battery mode) the MultiSensor. | 0 (Default) |
Disable waking up for 10 minutes when re-power on (battery mode) the MultiSensor. | |
| 1 | Enable waking up for 10 minutes when re-power on (battery mode) the MultiSensor. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 252 | 1 | Enable/disable all configuration parameters to be locked | 0 (Default) |
Disable all configuration parameters to be locked. | |
| 1 | Enable all configuration parameters to be locked. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 255 | 4 | Reset to default factory setting | 1 | Resets all configuration parameters to default setting. | |
| 1431655765 | Reset the product to default factory setting and be excluded from the Z-wave network. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 3 | 2 | Timeout of the motion sensor | 1 to 255 (Default) |
The unit of timeout is second. | |
| 256 to 15300 | The unit of timeout is minute. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 4 | 1 | Enable/disable the function of motion sensor. | 0 (Default) |
Disable the function of motion sensor. | |
| 1 | Enable the function of motion sensor. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 40 | 1 | Enable/disable the selective reporting only when measurements reach a certain threshold or percentage set in 41-44 below. | 1 | Enable the selective reporting. | |
| 0 (Default) |
Disable the selective reporting. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 41 | 2 | Threshold change in temperature to induce an automatic report. | 0 to 65535 (Default) |
Threshold of temperature. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 42 | 2 | Threshold change in humidity to induce an automatic report. | 0 to 100 (Default) |
Threshold of humidity | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 43 | 2 | Threshold change in luminance to induce an automatic report. | 0 to 1000 (Default) |
Threshold of luminance | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 44 | 2 | Threshold change in battery level to induce an automatic report. | 0 to 100 (Default) |
Threshold of battery level. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 46 | 1 | Enable/disable to send the alarm report of low temperature | 0 (Default) |
Disable to send the alarm report of low temperature(<-15℃) | |
| 1 | Enable to send the alarm report of low temperature(<-15℃) | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 5 | 1 | Which command would be sent when the motion sensor triggered. | 2 | Send Sensor Binary Report CC. | |
| 1 (Default) |
Send Basic Set CC. | ||||