Z-Wave Products

There are over 3000 interoperable Z-Wave products throughout the world, and over 94 million Z-Wave products have been sold since our beginnings in 2001. All of them work together regardless of brand, because they're all based on the common Z-Wave standard. Browse our Product Finder to see what Z-Wave can do for you.

Z-Wave Configuration Capabilities

Model: Smart Switch 6 (ZW096-C16)

Z-Wave Certification Number: ZC10-15080004


Parameter Number

Parameter Size

Parameter Name

Parameter Values

101 4 To set which report need to be sent. 8 Report Accumulated kWh
  2 Report Instantaneous Current (Amperes)
  4
(Default)
Report Instantaneous Watts
  1 Report Instantaneous Voltage

Parameter Number

Parameter Size

Parameter Name

Parameter Values

102 4 To set which report need to be sent. 1 Report Instantaneous Voltage
  4 Report Instantaneous Watts
  8
(Default)
Report Accumulated kWh
  2 Report Instantaneous Current (Amperes)

Parameter Number

Parameter Size

Parameter Name

Parameter Values

103 4 To set which report need to be sent. 4 Report Instantaneous Watts
  8 Report Accumulated kWh
  1 Report Instantaneous Voltage
  2 Report Instantaneous Current (Amperes)

Parameter Number

Parameter Size

Parameter Name

Parameter Values

111 4 Set the interval time of sending report. 0 to 268435456
(Default)
Interval Seconds

Parameter Number

Parameter Size

Parameter Name

Parameter Values

112 4 Set the interval time of sending report. 0 to 268435456
(Default)
Interval Seconds

Parameter Number

Parameter Size

Parameter Name

Parameter Values

113 4 Set the interval time of sending report. 0 to 268435456
(Default)
Interval Seconds

Parameter Number

Parameter Size

Parameter Name

Parameter Values

20 1 Configure the output load status after re-power on 0
(Default)
The output load status will be the same as the previous state before a power outage.
  2 The output load status will be OFF state after re-power on.
  1 The output load status will be ON state after re-power on.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

200 1 Partner ID 0
(Default)
Aeon Labs Standard Product
  1 to 255 Partner ID of Partner Product

Parameter Number

Parameter Size

Parameter Name

Parameter Values

252 1 Enable/Disable Lock Configuration 0
(Default)
All configuration parameters are configurable.
  1 All configuration parameters are not configurable (Locked).

Parameter Number

Parameter Size

Parameter Name

Parameter Values

254 2 Device Tag 0 to 32767
(Default)
Device Tag

Parameter Number

Parameter Size

Parameter Name

Parameter Values

255 4 Reset to default factory setting 1431655765 Reset the product to default factory setting and be excluded from the Z-wave network.
  1 Resets all configuration parameters to default setting.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

3 1 Current Overload Protection 1 Overload Protection is Enabled
  0
(Default)
Overload Protection Disabled

Parameter Number

Parameter Size

Parameter Name

Parameter Values

33 4 Change the color value of RGB LED for testing 255 to 65535 Range of red color value.
  16777215 to 2147483647 Range of blue color value.
  0 to 255
(Default)
Reserved
  65536 to 16777215 Range of green color value.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

80 1 Enable/Disable to send notifications to associated devices to associated devices. 2 Send BASIC Report Command
  0
(Default)
Send Nothing (Disabled)
  1 Send HAIL Command

Parameter Number

Parameter Size

Parameter Name

Parameter Values

81 1 Configure the state of LED 1 The state of LED will follow with the output load state, but will turn off after 5 seconds if there is no any switch action.(Momentary indicate mode)
  2 The state of LED will the same with Night light mode state configured by parameter 83.
  0
(Default)
The state of LED will follow with the output load state(Energy mode)

Parameter Number

Parameter Size

Parameter Name

Parameter Values

83 4 Configure the LED indication status when it is in Night light mode 0 to 255 Set the indication value of red Led.
  256 to 65535 Set the indication value of green Led.
  65536 to 16777215
(Default)
Set the indication value of blue Led.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

84 1 Configure the brightness level for the LED indication 0 to 100
(Default)
Brightness level range is 0 to 100%.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

90 1 Enable/Disable the function of parameter 91 and 92. 0 Configuration Parameters 91 and 92 are Disabled
  1
(Default)
Configuration Parameters 91 and 92 are Enabled

Parameter Number

Parameter Size

Parameter Name

Parameter Values

91 2 Induce an automatic report 0 to 32767
(Default)
The threshold can be set from 0 to 32767 watt.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

92 1 Induce an automatic report 0 to 100
(Default)
The threshold can be set from 0 to 100 percent.