Z-Wave Products

There are over 4042 interoperable Z-Wave products throughout the world, and over 94 million Z-Wave products have been sold since our beginnings in 2001. All of them work together regardless of brand, because they're all based on the common Z - Wavestandard.Browse our Product Finder to see what Z -Wave can do for you.

Z-Wave Configuration Capabilities

Model: Danalock V2 BTZJ ( Danalock V2 BTZJ)

Z-Wave Certification Number: ZC10-16075145


Parameter Number

Parameter Size

Parameter Name

Parameter Values

1 1 Direction 1 The motor goes counterclockwise when latched
  0
(Default)
The motor goes clockwise when latched

Parameter Number

Parameter Size

Parameter Name

Parameter Values

10 1 BrakeAndGoBack 0
(Default)
Disabled
  1 to 15 Seconds to brake. When used the lock will brake for x amount of seconds and then turn 75 degrees back. Made for special doors without door lever.(Only when unlatching).

Parameter Number

Parameter Size

Parameter Name

Parameter Values

11 1 Async 0
(Default)
Async off
  1 Async on. Used if the lock is using an optional rotation sensor. When async is enabled the lock will auto calibrate if already unlatched and asked to Unlatch again (used for special door locks where the key turn is asynced from the inside nob.)

Parameter Number

Parameter Size

Parameter Name

Parameter Values

12 1 Door lock operation report type 2 No Door lock operation reports are sent unsolicited.
  0
(Default)
Simple supported by all controllers that support door locks.
  1 Advanced, more specific reports through notification Command Class.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

2 1 Speed (Torque) 2 Slow
  3
(Default)
Normal
  4 Fast
  5 Fastest
  1 Slowest

Parameter Number

Parameter Size

Parameter Name

Parameter Values

3 1 Mode 1
(Default)
Stepper motor mode full drive(Normal)
  2 Relay mode
  0 Stepper motor mode wave drive(power saving)

Parameter Number

Parameter Size

Parameter Name

Parameter Values

4 1 Turn degrees 1 to 100
(Default)
Factor 10 turn degrees ( 1 = 10 degrees, 9 = 90 degrees etc.)

Parameter Number

Parameter Size

Parameter Name

Parameter Values

5 1 Auto Latch time 0 to 60
(Default)
How many seconds from the lock has been unlatched to it automatically should close again. If 0 then it is disabled.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

6 1 Sound 1
(Default)
Enable the beep sound from latch or unlatch operations
  0 Disable the beep sound from latch or unlatch operations

Parameter Number

Parameter Size

Parameter Name

Parameter Values

7 1 Battery Type 2 Mains power, changing from and to mains power requires the Danalock to be excluded and included.
  0 3,6 Volt battery
  1
(Default)
3.0 Volt battery.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

8 1 Battery alarm value 0 to 100
(Default)
When the battery level is under this value, the device will notify user with a beep sound after latch or unlatch.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

9 1 TurnAndGo 1 TurnAndGo on will turn automatically when manual turn is detected.
  0
(Default)
TurnAndGo off