There are over 4146 interoperable
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 10 | 1 | Auto Report Battery Time | 0 to 127 (Default) |
The interval time for auto report the battery level. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 2 | 1 | Basic Set Level | -128 to 127 (Default) |
Basic command value to turn on the light. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 20 | 1 | Auto Report Tick Interval | -128 to 127 (Default) |
The interval time for auto report each tick. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 3 | 1 | PIR Sensitivity | 0 to 99 (Default) |
PIR sensitivity setting. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 6 | 1 | Multi-Sensor Function Switch | 8 | When Bit2 is 0(Enable), Are the device and the lighting in the same room? 0:In the same room(Default), 1:In the different room. | |
| 16 | Disable delay 5 seconds to turn off the light,when door/window closed.(1:Disable, 0:Enable) | ||||
| 32 | Disable auto turn off the light,after door/window opened to turn on the light.(1:Disable, 0:Enable) | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 7 | 1 | Customer Function | 2 | Enable sending motion OFF report.(0:Disable, 1:Enable) | |
| 4 (Default) |
Enable PIR suoer sensitivity mode. | ||||
| 16 | Notification Type,0:Using Notification Report. 1: Using Sensor Binary Report. | ||||
| 32 | Disable Multi CC in auto report.(1:Disable, 0:Enable) | ||||
| 64 | Disable to report battery state when the device triggered.(1:Disable, 0:Enable) | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 8 | 1 | PIR Re-Detect Interval Time | 1 to 127 (Default) |
Re-detect time | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 9 | 1 | Turn Off Light Time | 0 to 127 (Default) |
Delay time to turn off the lighting when the PIR motion is not detected. | |