Z-Wave Products

There are over 4107 interoperable Z-Wave products throughout the world, and over 94 million Z-Wave products have been sold since our beginnings in 2001. All of them work together regardless of brand, because they're all based on the common Z - Wavestandard.Browse our Product Finder to see what Z -Wave can do for you.

Z-Wave Configuration Capabilities

Model: Single Function PIR Sensor (PSP05)

Z-Wave Certification Number: ZC10-16115311


Parameter Number

Parameter Size

Parameter Name

Parameter Values

10 1 Auto Report Battery Time 0 to 127
(Default)
The interval time for auto report the battery level.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

2 1 Basic Set Level -128 to 127
(Default)
Basic command value to turn on the light.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

20 1 Auto Report Tick Interval -128 to 127
(Default)
The interval time for auto report each tick.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

3 1 PIR Sensitivity 0 to 99
(Default)
PIR sensitivity setting.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

6 1 Multi-Sensor Function Switch 16 Disable delay 5 seconds to turn off the light,when door/window closed.(1:Disable, 0:Enable)
  32 Disable auto turn off the light,after door/window opened to turn on the light.(1:Disable, 0:Enable)
  8 When Bit2 is 0(Enable), Are the device and the lighting in the same room? 0:In the same room(Default), 1:In the different room.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

7 1 Customer Function 2 Enable sending motion OFF report.(0:Disable, 1:Enable)
  4
(Default)
Enable PIR suoer sensitivity mode.
  16 Notification Type,0:Using Notification Report. 1: Using Sensor Binary Report.
  32 Disable Multi CC in auto report.(1:Disable, 0:Enable)
  64 Disable to report battery state when the device triggered.(1:Disable, 0:Enable)

Parameter Number

Parameter Size

Parameter Name

Parameter Values

8 1 PIR Re-Detect Interval Time 1 to 127
(Default)
Re-detect time

Parameter Number

Parameter Size

Parameter Name

Parameter Values

9 1 Turn Off Light Time 0 to 127
(Default)
Delay time to turn off the lighting when the PIR motion is not detected.