TThere are thousands of interoperable
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 1 | 4 | Standy Power Setting Value | 0 to 60000 (Default) |
standby power reference value range(3 byte) | |
| 0 to 1 (Default) |
standby power monitoring function enable/disable setting value | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 2 | 1 | Peridic Measurement Value Transmission | 0 to 1 (Default) |
If value is 0, Plug do not transmit power value. If value is 1, plug transmits power value to hub. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 3 | 1 | Accumulation Start/Stop | 0 to 1 (Default) |
If value is 0, plug stop accumulating power value. If value is 1, plug start accumulating power value. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 4 | 1 | Connected Device Use/Not Use | 0 to 1 (Default) |
If value is 0, connected device is Not use, If value is 1, it is in use. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 5 | 1 | Periodic Time Intervals | 1 to 144 (Default) |
unit is per 10 minutes.you can change this value using configuration command class. | |