Product Network Management Instructions

Z-Wave Network Management & Other Instructions

Model: XLED home 2 Z-Wave (50111677101 )

Z-Wave Certification Number: ZC10-17045541

Procedure	Instructions
Exclusion	To put the device into exclusion mode, turn the device's control dial (F) to ""Set"" and back to ""0"" within 5 seconds. The red status LED (G) lights up to show that this mode is selected. Removing XLED home 2 from the Smart Friends system: 1) In the rooms view, activate the edit mode. 2) Select the device in the chosen room and press the ""delete"" button. Press delete and follow the instructions in the app. 3) To put the device into exclusion mode, turn the device's control dial (F) to ""Set"" and back to ""0"" within 5 seconds. The red status LED (G) lights up to show that this mode is selected. 4) The app displays a confirmation message once exclusion has been successfully completed.
Inclusion	To put the device into inclusion mode, turn the device's control dial (F) to ""Set"" and back to ""0"" within 5 seconds. The status LED (G) lights up to show that this mode is selected. Adding XLED home 2 to the Smart Friends system: 1) Download the Smart Friends app from the app store. 2) In the rooms view, activate the edit mode. 3) Select the chosen room and press the ""Add device"" button. 4) To put the device into inclusion mode, turn the device's control dial (F) to ""Set"" and back to ""0"" within 5 seconds. The status LED (G) lights up to show that this mode is selected. 5) The app displays a confirmation message once inclusion has been successfully completed.
Additional Special Features	Setting XLED home 2 with the app: –– After programming, an ON/OFF scene is automatically created in the app. –– The following setting values are then automatically stored: a) Twilight setting = control-dial setting b) Time setting = 3 min switch-OFF delay –– The twilight and time settings can be selected to the accuracy of one lux and one second respectively in the ""Scene"" menu.
Factory Reset	Resetting XLED home 2 to factory settings: Please use this procedure only when the network primary controller is missing or otherwise inoperable. 1) Turn the device's control dial (F) to ""Set"" and move it to ""Reset"" within 5 seconds. 2) The status LED (G) briefly flashes to show that the light has been reset. 3) The device is now no longer included in the Z-Wave system and has been returned to factory settings.