GoControl Z-Wave Plus Battery Powered Smart Thermostat

Product details

Home

« Back to Listing

GoControl Z-Wave Plus Battery Powered Smart Thermostat

Brand Name: Nortek

Product Identifier: GC-TBZ48L

Product Version: HW: 1 FW: 1.00:02.06

Z-Wave Certification Number: ZC10-17055590

Z-Wave Certification Date: 5/11/2017

Z-Wave Protocol Implementation Conformance Statement: View Download

The GC-TBZ48 Z-Wave Plus Thermostat is a programmable, Z-Wave communicating thermostat. It can be powered using 24VAC, or using four (4) AA batteries. Using Z-Wave technology, end users have the ability to use most compatible Z-Wave hubs/controllers to operate and animate the thermostat, configure programming settings, as well as to display current conditions in the home or office.

Buy Product: Buy GoControl Z-Wave Plus Battery Powered Smart Thermostat

Product Features: View Features

Other Special Features:

Test Mode - shortens the system built-in delays (like
MOT and MRT)
Aux Heat Enable (Heat Pump Systems only) - Enables the auxiliary heat operation.
2nd Stage Heat Enable - Enables the second stage heat operation
2nd Stage Cool Enable - Enables the second stage cool operation
Minimum run time - Sets the Minimum Run Time (MRT) delay before a heating/cooling cycle can turn off. Prevents rapid on/off cycling.
Minimum Off Time - Sets the Minimum Off Time (MOT) delay before
another heating/cooling cycle can begin. Provides
compressor short cycle protection. “Wait” is displayed
on screen when active.
Heat Setpoint Max. - Sets the maximum heating setpoint value.
Will not ramp or accept setpoints higher than this maximum
Cool Setpoint Min. - Sets the maximum heating setpoint value
Heat Blower Off Delay - Sets the system blower delay off time after a heat call ends (fan purge)
Cool Blower Off Delay - Sets the system blower delay off time after a cool call ends (fan purge)
Heat - Cool Delta - Sets the minimum separation between heating
and cooling setpoints.
Heating Stage 1 on Threshold - Sets the delta from setpoint that stage 1 heating starts.
Heating Stage 1 Off Threshold - Sets the delta from setpoint that stage 1 heating stops.
Heating Stage 2 On Threshold - Sets the delta from setpoint that stage 2 heating starts.
Heating Stage 2 Off Threshold - Sets the delay from setpoint that stage 2 heating stops.
Aux Heat On Threshold - Sets the delta from setpoint that stage 3 heating starts.
Aux Heat Off Threshold - Sets the delta from setpoint that stage 3 heating stops.
Cooling Stage 1 On Threshold - Sets the delta from setpoint that stage 1 cooling starts.
Cooling Stage 1 Off Threshold - Sets the delta from setpoint that stage 1 cooling stops.
Cooling Stage 2 On Threshold - Sets the delta from setpoint that stage 2 cooling starts.
Cooling Stage 2 Off Threshold - Sets the delta from setpoint that stage 2 cooling stops.
Restore Defaults - Restores all settings to factory defaults.

Z-Wave Plus: Yes

SmartStart Compatible: No

Manufacturer Provided Product Manual: Download

Association Capabilities: View Associations

Configuration Capabilities: View Configuration Parameters

Z-Wave hardware platform: ZM5202

Z-Wave version: 6.51.06

Z-Wave library type: Routing Slave

Z-Wave Device Type: Thermostat - HVAC

Z-Wave Role Type: Always On Slave

Product Type ID: 0x5442

Product ID: 0x5436