Z-Wave Products

There are over 3000 interoperable Z-Wave products throughout the world, and over 94 million Z-Wave products have been sold since our beginnings in 2001. All of them work together regardless of brand, because they're all based on the common Z-Wave standard. Browse our Product Finder to see what Z-Wave can do for you.

Z-Wave Association Capabilities

Model: Flood & Temperature Sensor (FTS05)

Z-Wave Certification Number: ZC10-17075715


Group ID Group Profile Name Profile Maximum Nodes Description Endpoint ID Commands
1 2 Z-Wave Plus Lifeline • Device Reset Locally (via 3 quick presses of the program switch) • Battery Report (when calculated battery life percentage changes) • Notifications o Water (Type 5; Event Waterleak_Detected) o Heat (Type 4; Event Underheat_Detected) o Heat (Type 4; Event Underheat_Detected) Power (Type 8; Events Power_Applied, Replace_Soon, Replace_Now) 0
2 2 Basic Set Command ON (default, 0xFF) or OFF (0x00) is sent to the associated nodes to indicate that a Water Alarm is active. This depends on the parameter 4 configuration value. When the water alarm is cleared, one additional report with the opposite value is sent. 0
3 2 Basic Set Command with value = 0xFF is sent to the associated nodes to indicate that a Temperature High condition has been detected. When the temperature is back in the normal range, one additional report with value = 0x00 is sent. 0
4 2 Basic Set Command with value = 0xFF is sent to the associated nodes to indicate that a Temperature Low condition has been detected. When the temperature is back in the normal range, one additional report with value = 0x00 is sent. 0
5 2 Temperature report (Multilevel Sensor) when the temperature has changed (with filtering/hysteresis to avoid continuous transmissions at a transition point). 0
6 2 Temperature report (Multilevel Sensor) every 5 minutes 0
7 2 Temperature report (Multilevel Sensor) every 20 minutes 0
8 2 Temperature report (Multilevel Sensor) every 60 minutes 0