Product Network Management Instructions

Z-Wave Network Management & Other Instructions

Model: Door Contact (DC-23ZW)

Z-Wave Certification Number: ZC10-17085726

Procedure	Instructions
Factory Reset	Press and hold the Function Button of the Door Contact for 10 seconds to factory reset (only use factory reset when network Control Panel/Gateway is missing or inoperable).
Exclusion	1. Put the Z-Wave gateway or control panel into Exclusion mode (please refer to the Z-Wave gateway or control panel manual). 2. Within 1.5 seconds, press the Function Button 3 times and the Door Contact will be removed from the Z-Wave network.
Inclusion	1. Pull out the battery insulator; this will connect the battery to power on the Door Contact. 2. Put the Z-Wave Gateway or Control Panel into Inclusion mode (Please refer to the Z-Wave Gateway or Control Panel manual). 3. Press the Function button 3 times within 1.5 seconds. 4. Refer to the operation manual of the Z-Wave Gateway or Control Panel to complete adding process. 5. If the Door Contact has already been added (included) into another Z-Wave Gateway/Control Panel, or if the Door Contact is unable to be added into the current Z-Wave Gateway/Control Panel, please exclude it first (see Removing Device) before attempting to include it into the current Z-Wave Gateway/Control Panel.
Device Wake-Up	The Wake Up Command Class allows the battery-powered Door Contact to notify the Control Panel/Gateway that it is awake and ready to receive any queued commands. The wake up interval time period is programmed automatically according to Control Panel’s setting when The Door Contact is included. The recommended setting of the interval time is between 30 to 60 minutes.