There are over 4393 interoperable
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 100 | 1 | Set parameter 101-103 to default value. | 0 (Default) |
Reset the parameter 101-103 | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 101 | 4 | To set which reports need to be sent in Report group 1. | 4 | Send Meter Report of voltage (V) | |
| 2 | Send Meter Report of wattage (W) | ||||
| 8 | Send Meter Report of current (A) | ||||
| 1 | Send Meter Report of energy (kWh) | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 102 | 1 | To set which reports need to be sent in Report group 2. | 1 | Send Meter Report of energy (kWh) | |
| 2 | Send Meter Report of wattage (W) | ||||
| 4 | Send Meter Report of voltage (V) | ||||
| 8 | Send Meter Report of current (A) | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 103 | 1 | To set which reports need to be sent in Report group 3. | 1 | Send Meter Report of voltage (V) | |
| 2 | Send Meter Report of current (A) | ||||
| 4 | Send Meter Report of wattage (W) | ||||
| 8 | Send Meter Report of energy (kWh) | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 110 | 1 | Set parameter 111-113 to default value. | 0 (Default) |
Reset the parameter 111-113 | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 111 | 4 | Set the interval of automatic report for Report group 1. | 1 to 2147483647 (Default) |
The range of interval time is 1 to 2147483647. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 112 | 4 | Set the interval of automatic report for Report group 2. | 1 to 2147483647 (Default) |
The range of interval time is 1 to 2147483647. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 113 | 4 | Set the interval of automatic report for Report group 2. | 1 to 2147483647 (Default) |
The range of interval time is 1 to 2147483647. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 120 | 1 | Configure the external switch mode for S1. | 0 (Default) |
Enter automatic identification mode | |
| 1 | 2-state switch mode | ||||
| 2 | 3 way switch mode | ||||
| 3 | Momentary push button mode | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 121 | 1 | Configure the external switch mode for S2. | 0 (Default) |
Enter automatic identification mode | |
| 1 | 2-state switch mode | ||||
| 2 | 3 way switch mode | ||||
| 3 | Momentary push button mode | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 122 | 1 | Set the control destination for external switch | 2 | control the other nodes | |
| 1 | control the output loads of itself. | ||||
| 3 (Default) |
control the output loads of itself and other nodes. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 20 | 1 | Configure the output status after re-power on it. | 1 | Always on | |
| 0 (Default) |
Last status | ||||
| 2 | Always off | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 252 | 1 | Lock/unlock configuration parameters | 0 (Default) |
Unlock | |
| 1 | Lock | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 255 | 4 | Reset the In-Wall Switch | 0 (Default) |
Reset all configuration parameters to factory default setting | |
| 1431655765 | Reset to factory default setting and removed from the z-wave network | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 3 | 1 | Current Overload Protection. | 1 (Default) |
Enable | |
| 0 | Disable | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 4 | 1 | Overheat protection. | 0 (Default) |
Disable | |
| 1 | Enable | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 80 | 1 | To set which notification would be sent to the associated devices (Group 1) | 0 | Send Nothing | |
| 1 | Send Hail CC | ||||
| 2 | Send Basic Report CC | ||||
| 3 (Default) |
Send Hail CC when using the manual switch to change the load state. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 81 | 1 | To set which notification would be sent to the associated nodes in association group 3 | 0 | Send Nothing | |
| 1 (Default) |
Send Basic Set CC | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 82 | 1 | To set which notification would be sent to the associated nodes in association group 4 | 0 | Send Nothing | |
| 1 (Default) |
Send Basic Set CC | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 83 | 1 | Configure the state of LED when it is in 3 modes | 2 | Night light mode. The LED will remain ON state. | |
| 0 (Default) |
Energy mode. The LED will follow the status (on/off). | ||||
| 1 | Momentary indicate mode. When the state of Switch’s load changed, the LED will follow the status (on/off) of its load, but the LED will turn off after 5 seconds if there is no any switch action. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 84 | 1 | Set the ON/OFF time of the LED when it is in Night light mode. | 0 to 60 | The minute time of OFF | |
| 256 to 316 | The hour time of OFF | ||||
| 65536 to 65596 | The minute time of ON | ||||
| 16777216 to 16777276 | The hour time of ON | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 86 | 4 | Set appointment 1 | 65536 to 65543 | The day value (Mon to Sun) | |
| 16777216 | Enable the setting. | ||||
| 256 to 316 | The hour value of ON time | ||||
| 16777215 | Disable the setting. | ||||
| 0 to 60 | The minute value of ON time | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 87 | 4 | Set appointment 2 | 256 to 316 | The hour value of ON time | |
| 65536 to 65543 | The day value (Mon to Sun) | ||||
| 16777215 | Disable the setting. | ||||
| 0 to 60 | The minute value of ON time | ||||
| 16777216 | Enable the setting. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 90 | 1 | Enables/disables parameter 91 and 92 below: | 0 (Default) |
Disable | |
| 1 | Enable | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 91 | 2 | Set the threshold value of wattage. | 0 to 60000 (Default) |
The thershold value range is 0 to 60000 | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 92 | 1 | Set the threshold value of wattage. | 0 to 100 (Default) |
The thershold value range is 0 to 100 | |