There are over 4392 interoperable
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 12 | 1 | MOTION SENSOR’S SENSITIVITY | 1 to 8 (Default) |
The higher the value, the more sensitive the PIR sensor. | |
| 0 | |||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 14 | 1 | ENABLE/DISABLE BASIC SET COMMAND | 0 (Default) |
Disable | |
| 1 | Enable | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 15 | 1 | VALUE OF THE BASIC SET | 0 (Default) |
Send BASIC SET VALUE = 255 to nodes associated with group 2 when motion alarm is triggered. Send BASIC SET VALUE = 0 to nodes associated with group 2 when motion alarm is canceled. | |
| 1 | Send BASIC SET VALUE = 0 to nodes associated with group 2 when motion alarm is triggered. Send BASIC SET VALUE = 255 to nodes associated with group 2 when motion alarm is canceled. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 17 | 1 | ENABLE/DISABLE SHOCK ALARM | 0 to 1 (Default) |
when the value is 0, the product will not sends a vibration alarm after moving or shaking; when the value is 1, the product will sends a vibration alarm after moving or shaking | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 18 | 2 | MOTION ALARM CANCELLATION DELAY | 0 (Default) |
Reports are not sent | |
| 1 to 65535 | the change in luminance level resulting in luminance report being sent to the main controller. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 32 | 1 | LEVEL OF LOW BATTERY | 10 to 50 (Default) |
The low level from 10% to 50% | |