Product Network Management Instructions

Z-Wave Network Management & Other Instructions

Procedure	Instructions
Exclusion	1) Open the cover. 2) Place the device within the direct range of your Z-Wave controller. 3) Set the main controller remove mode (see the controller’s manual). 4) Triple click the Z-button quickly, the LED indicator should blink fast. 5) Wait for the removing process to end. 6) Successful adding will be confirmed by the Z-Wave controller’s message.
Device Wake-Up	Press and hold the Z button for more than 5 seconds and release.
Inclusion	1) Open the cover. 2) Place the device within the direct range of your Z-Wave controller. 3) Set the main controller in add mode (see the controller’s manual). 4) Click the Z-button once or triple click the Z-button quickly, the LED indicator should blink fast. 5) Wait for the adding process to end. 6) Successful adding will be confirmed by the Z-Wave controller’s message.
Learn Mode (adding another controller)	Triple click the Z-button quickly，and then the dut will enter into the Learn Mode.
Factory Reset	1)Power on the device, 2) Press and hold the Z button for more than 20 seconds, 3) If holding time more than 20seconds, the LED indicator will keep on for 2 seconds, which means resetting is complete. 4) The reset feature works only when the device has been included into a Z-Wave network. Please use this procedure only when the network primary controller is missing or otherwise inoperable.