Z-Wave Products

There are over 3978 interoperable Z-Wave products throughout the world, and over 94 million Z-Wave products have been sold since our beginnings in 2001. All of them work together regardless of brand, because they're all based on the common Z - Wavestandard.Browse our Product Finder to see what Z -Wave can do for you.

Z-Wave Configuration Capabilities

Model: Slim Multisensor (PST02-A-BR)

Z-Wave Certification Number: ZC10-17105797


Parameter Number

Parameter Size

Parameter Name

Parameter Values

10 1 Auto Report Battery Time 0 to 127
(Default)
The default value is 12. The tick time can setting by the configuration No.20.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

11 1 Auto Report Door/Windo w State 0 to 127
(Default)
The default value is 12. The tick time can setting by the configuration No.20.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

12 1 Auto Report Illumination Time 0 to 127
(Default)
The default value is 12. The tick time can setting by the configuration No.20.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

13 1 Auto Report Temperature Time 0 to 127
(Default)
The default value is 12. The tick time can setting by the configuration No.20.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

2 1 Basic Set Level 0 to 127
(Default)
equipment 1 to 100 means the light strength. 0 means turn off the light
  0 turn off the light

Parameter Number

Parameter Size

Parameter Name

Parameter Values

20 1 Auto Report Tick Interval 0 to 127
(Default)
The unit is 1 minute,Setting this configuration will effect configuration No.10, No.11, No.12 and No.13.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

21 1 Temperature Differential Report 1 to 127
(Default)
Enable this function the device will detect every minutes. And when the temperature is over 140 degree Fahrenheit, it will continue report.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

22 1 Illumination Differential Report 0 to 99
(Default)
Enable this function the device will detect every minutes.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

3 1 PIR Sensitivity 0 disable the PIR motion
  0 to 99
(Default)
PIR sensitivity settings
  1 the lowest sensitivity
  99 the highest sensitivity

Parameter Number

Parameter Size

Parameter Name

Parameter Values

4 1 Light Threshold 0 to 100
(Default)
Setting the illumination threshold to turn on the light
  1 1 means darkest
  99
(Default)
99 means brightest
  100 100 means turn off illumination

Parameter Number

Parameter Size

Parameter Name

Parameter Values

5 1 Operation Mode 0 to 127
(Default)
Setting Operation mode.
  1 Bit0: Reserve.
  2 Bit1: 1 means test mode, 0 means normal mode.
  4 Bit2: Disable the door/window function.(1:Disable, 0:Enable)
  8 Bit3: Setting the temperature scale. 0: Fahrenheit, 1:Celsius
  10 Bit4: Disable the illumination report after event triggered. (1:Disable, 0:Enable)
  20 Bit5: Disable the temperature report after event triggered. (1:Disable, 0:Enable)
  40 Bit6: Reserve.
  80 Bit7: Disable the back key release into test mode. (1:Disable, 0:Enable)

Parameter Number

Parameter Size

Parameter Name

Parameter Values

6 1 Mult- Sensor Function Switch 0 to 127
(Default)
Multisensor function switch
  1 Bit0: Disable magnetic integrate illumination to turn ON the lighting nodes in the association group 2. (1:Disable, 0:Enable)
  2 Bit1: Disable PIR integrate Illumination to turn ON the lighting nodes in the association group 2. (1:Disable, 0:Enable)
  4
(Default)
Bit2: Disable magnetic integrate PIR
  8 Bit3: When Bit2 is 0 (Enable), Are the device and the lighting in the same room? 0: In the same room(Default),1: In the different room
  10 Bit4: Disable delay 5 seconds to turn off the light, when door/window closed.(1:Disable, 0:Enable)
  20 Bit5: Disable auto turn off the light, after door/window opened to turn on the light.(1:Disable, 0:Enable)
  40 Bit6: Reserve.
  80 Bit7: Reserve.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

7 1 Customer Function 0 to 127
(Default)
Customer function switch
  1 Bit0: Reserve.
  2 Bit1: Enable sending motion OFF report. (0:Disable, 1:Enable)
  4
(Default)
Bit2: Enable PIR super sensitivity mode. (0:Disable, 1:Enable)
  8 Bit3: Disable send out BASIC OFF after door closed. (1:Disable,0:Enable)
  10 Bit4: Notification Type, 0: Using Notification Report. 1: Using Sensor Binary Report.
  20 Bit5: Disable Multi CC in auto report. (1:Disable, 0:Enable)
  40 Bit6: Disable to report battery state when the device triggered.(1:Disable, 0:Enable)
  80 Bit7: Reserve.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

8 1 PIR Re- Detect Interval Time 1 to 127
(Default)
default tick is 3 (24 seconds).

Parameter Number

Parameter Size

Parameter Name

Parameter Values

9 1 Turn Off Light Time 0 to 127
(Default)
default tick is 4 (32seconds).