Product Network Management Instructions

Z-Wave Network Management & Other Instructions

Procedure	Instructions
Inclusion	Turn the primary controller of Z-Wave network into inclusion mode, short press the product’s Action Button that you can find in the back of the product.
Exclusion	Turn the primary controller of Z-Wave network into exclusion mode, short press the product’s Action Button that you can find in back of the product.
Factory Reset	Press the Action Button once that you can find in back of the product for 20 seconds and then release. This procedure should only be used when the primary controller is inoperable.
Device Wake-Up	Press the Action Button once, which will trigger sending out the Wake up notification command, press and hold the Action Button for 3 seconds, which will toggle on/off the Sensor be waked up for 10 minutes.
Additional Special Features	Support ""Over the Air Firmware Updating"" and “Z-Wave Security”.