The SE Devices Wheel Controller Z-Wave is a modular Wall-Box mountable control wheel, which is controllable over a Z-Wave Home Automation Network. The device can be added to and remote controlled via a Z-Wave Home Automation network. This product can be operated in any Z-Wave network with other Z-Wave certified devices from other manufacturers. All non-battery operated nodes within the network will act as repeaters regardless of vendor to increase reliability of the network.

The Wheel Controller unit itself can be combined with a Back Unit hidden inside a wall-box to provide local control possibilities. It can also operate in a Stand-Alone mode, powered via a Cascade connector to another unit (Multifunction Switch or Wheel Controller).

There are a variety of Back Units available for the Wheel, which can provide Local control functionality such as Relay Control and Dimming.

The Wheel is backed by 4 push buttons, located at the Upper, Lower, Left and Right sides of the wheel. By pushing on these points of the wheel, the various functions of the wheel can be accessed and controlled.

The Wheel can be rotated in a clockwise and counter clockwise direction to control the Light Level, adjust temperature settings for the Thermostat and issue Central Scene commands. The current operation is shown in the display at all times. When used as a Thermostat, the display will show information on thermostat operation when the device is Idle.